peakboosth22

wELL, my boosted, bored over, h22 project is about to be finished. Right now, im searching for an awesome tuner who can make high horsepower on pump gas.
Any recommendations would be appreciated.

Here's my setup

Bored over .040(ARIAS PISTONS 9:2 CR)
MANLEY RODS from full-race
PTE SC6152E
PRECISION INTERCOOLER (650HP)
PRECISION INJECTORS(1000cc)
MID DARTON SLEEVES
PORT AND POLISH HEAD........BLAH.... BLAH...BLAH

anyways, hollla at me

john d

dude bro... AWesomE

peakboosth22

Thanxs, man. Pics are in the works

JDogg

i'm in NC

rmcdaniels

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDogg &raquo;</TD></TR><TR><TD CLASS="quote">i'm in NC </TD></TR></TABLE>


^^^^^^^^^^^He's really good, he tunes all my stuff.^^^^^^^^^^^^^^^^^

peakboosth22

cool, man!! im guessing ur a pro with hondata, or a s200 to be more specific. Have u seen any h-series motors reach close to the 500hp mark on pump gas

JDogg

most of hte hseries stuff i have done has been NA, i have done alot of b-series around the 500hp mark on pump gas.

your setup probably wont make that much on pump gas, it really depends on the head, cams and exhaust manifold though.

i prefer aem over the hondata, but hondata works fine

bigbadboy

i heard RLZ is great and turbo tune are pretty good too. they are all in NC

peakboosth22

My head has a port and polish, 3 angle valve-job,
My turbo manifold is a PEakboost manifold with a 3" downpipe all the way to the muffler

SFlCrx

Pm Turbogixxer

peakboosth22

thanks for the info. Any more suggestions

4rc-fed

interested as well

mase is 8 hours away from north AL

peakboosth22

i've heard about MASE and his work, too. Were is he located at?

1slowhatchie

pm'd

turbosnatch

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by peakboosth22 &raquo;</TD></TR><TR><TD CLASS="quote">i've heard about MASE and his work, too. Were is he located at?</TD></TR></TABLE>

gainesville florida

rmcdaniels

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bigbadboy &raquo;</TD></TR><TR><TD CLASS="quote"> turbo tune are pretty good too. they are all in NC</TD></TR></TABLE>

NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO!!!!!!!!!!!!!
I had a bad experience at Turbo Tune, I'll never let Mark tune any more of my cars.

.dave

Can't go wrong with Jdogg or Mase.

Both are very competent and experienced tuners.

sp00led

Arthur @ Trackmasters can help you out he has a dynojet and prefers to tune hondata but can do most anything. His shop is in huntsville, al.

http://www.etrackmasters.com

sp00led

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 4rc-fed &raquo;</TD></TR><TR><TD CLASS="quote">interested as well

mase is 8 hours away from north AL </TD></TR></TABLE>

More like 10hrs or 600 miles.

spooncivic1

Jpoop &gt; J. Davis &gt; Howard &gt; Mark

Got_soy

you could try precisionh23 he's in charleston.

slowdaintegra

mase

Schister66

i'd say MA$E but that's just because he's more well known...there may be tuners that are just as good or better minus the hype

Clutch101

http://www.seendata.com/

peakboosth22

Modified by peakboosth22 at 6:54 PM 9/29/2006