itr motor, itr cams, rc, JDM EG rear interior/harness, header, wiseco, EK SSR
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2001
Location: Clearwater, FL, USA
Posts: 2,503
Likes: 0
Received 0 Likes
on
0 Posts
itr motor, itr cams, rc, JDM EG rear interior/harness, header, wiseco, Sprint CPFs
*Apexicone 9006 HID (6K temp): used for 2 months: $200obo
*JDM EG hatch rear interior. Include seats (bracket needs fabrication), speaker covers. Need rear black plastic panels in return, seats not needed. Minor scratches and a crack on the pass side-Make Offer.
*'97-98 spec itr cams-SOLD
*itr valve cover-$100obo
*Jdm 4-1 header SOLD
*ITR block/b16 head: 2001ITR OEM complete short block bought from Acura. Motor was built by Neal Sutton (11 sec AM Crx)-Block has less than 7k miles on it. Runs perfect, not a drop of oil leak nor burn. Includes skunk2 intake manifold, skunk2 cam gears, itr cams, itr intake valves, ferrea oversized stainless ex. valves, skunk retainers, itr springs, ported polished head all done by lhtperformance.net, arp head bolts, oem head gasket, jdm itr header, spoon low temp thermostat., vision catch can, jdm itr valve cover, b&m fuel pressure regulator. Ran 13.9@100mph after a quick street tune in my '94 hatchback with full interior and bald tires. Motor is still in the car so serious buyers can check it out prior to purchase. $3500 obo.
*Compete RHD EG harness-SOLD
*brand new Wiseco 81.5mm High CR pistons: K593M815, comp ht is 1.1815 (coated skirts, includes rings,pins, etc)-SOLD
*Sparco Torino seats. SOLD
*AEM EMS OBD1 Honda Acura 30-1000 Standalone ECU. No software but it can be downloaded through their website. SOLD
*Brand new H22 Crower billet rods-$550obo
*'98 pass Integra headlight (2 tabs broken but otherwise in good condition). Includes drivers side outer lens. Could be put on '94-up Integra housing. $100 plus shipping.
*'98 up Integra Coupe Tailights: great shape. SOLD
*'96-00 EK SSR tie bar, rear sway, ssr LCAs- Two nicks on the lcas that can't really be seen when installed. Bushings are in good condition. SOLD
15 x 6.5 +45mm offset SOLD
Located in Tampa, FL. Pickup is fine. Contact by e-mail: specie09@gmail.com
Modified by specie at 10:54 PM 2/1/2007
Modified by specie at 9:03 PM 2/8/2007
Modified by specie at 3:42 PM 3/12/2007
Modified by specie at 5:00 PM 4/9/2007
Modified by specie at 1:40 PM 7/31/2007
Modified by specie at 8:46 PM 11/6/2007
Modified by specie at 2:16 PM 2/22/2008
*JDM EG hatch rear interior. Include seats (bracket needs fabrication), speaker covers. Need rear black plastic panels in return, seats not needed. Minor scratches and a crack on the pass side-Make Offer.
*'97-98 spec itr cams-SOLD
*itr valve cover-$100obo
*Jdm 4-1 header SOLD
*ITR block/b16 head: 2001ITR OEM complete short block bought from Acura. Motor was built by Neal Sutton (11 sec AM Crx)-Block has less than 7k miles on it. Runs perfect, not a drop of oil leak nor burn. Includes skunk2 intake manifold, skunk2 cam gears, itr cams, itr intake valves, ferrea oversized stainless ex. valves, skunk retainers, itr springs, ported polished head all done by lhtperformance.net, arp head bolts, oem head gasket, jdm itr header, spoon low temp thermostat., vision catch can, jdm itr valve cover, b&m fuel pressure regulator. Ran 13.9@100mph after a quick street tune in my '94 hatchback with full interior and bald tires. Motor is still in the car so serious buyers can check it out prior to purchase. $3500 obo.
*Compete RHD EG harness-SOLD
*brand new Wiseco 81.5mm High CR pistons: K593M815, comp ht is 1.1815 (coated skirts, includes rings,pins, etc)-SOLD
*Sparco Torino seats. SOLD
*AEM EMS OBD1 Honda Acura 30-1000 Standalone ECU. No software but it can be downloaded through their website. SOLD
*Brand new H22 Crower billet rods-$550obo
*'98 pass Integra headlight (2 tabs broken but otherwise in good condition). Includes drivers side outer lens. Could be put on '94-up Integra housing. $100 plus shipping.
*'98 up Integra Coupe Tailights: great shape. SOLD
*'96-00 EK SSR tie bar, rear sway, ssr LCAs- Two nicks on the lcas that can't really be seen when installed. Bushings are in good condition. SOLD
15 x 6.5 +45mm offset SOLD
Located in Tampa, FL. Pickup is fine. Contact by e-mail: specie09@gmail.com
Modified by specie at 10:54 PM 2/1/2007
Modified by specie at 9:03 PM 2/8/2007
Modified by specie at 3:42 PM 3/12/2007
Modified by specie at 5:00 PM 4/9/2007
Modified by specie at 1:40 PM 7/31/2007
Modified by specie at 8:46 PM 11/6/2007
Modified by specie at 2:16 PM 2/22/2008
#5
Honda-Tech Member
Thread Starter
Join Date: Feb 2001
Location: Clearwater, FL, USA
Posts: 2,503
Likes: 0
Received 0 Likes
on
0 Posts
Re: itr motor, itr cams, rc, JDM EG rear interior/harness, header, wiseco, EK SSR (specie)
anyone can beat $275 for the complete ssr setup?
Trending Topics
#10
Junior Member
Join Date: Feb 2006
Location: Highlands Ranch Colorado
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Re: itr motor, itr cams, rc, JDM EG rear interior/harness, header, wiseco, EK SSR (specie)
do u have a number i can get ahold of you.. interested in the rlcas..
#11
Honda-Tech Member
iTrader: (1)
Re: itr motor, itr cams, rc, JDM EG rear interior/harness, header, wiseco, EK SSR (igotboost)
Well, sinc eyou didn't do it man... I gave you more than enough time, sorry.
Those aren't ITR cams, don't buy them. They are b17 cams.
THESE are 96-97 spec ITR cams (my cams)
Looks a little different than the ones in this thread, doesn't it?
This is a pic I got from Honda-Tech
Here are b17 cams (what the OP is selling)
Sorry man... You need to be honest with the potential buyer and NOT sell them bascically useless b17 cams.
Those aren't ITR cams, don't buy them. They are b17 cams.
THESE are 96-97 spec ITR cams (my cams)
Looks a little different than the ones in this thread, doesn't it?
This is a pic I got from Honda-Tech
Here are b17 cams (what the OP is selling)
Sorry man... You need to be honest with the potential buyer and NOT sell them bascically useless b17 cams.
#12
Honda-Tech Member
Thread Starter
Join Date: Feb 2001
Location: Clearwater, FL, USA
Posts: 2,503
Likes: 0
Received 0 Likes
on
0 Posts
Re: itr motor, itr cams, rc, JDM EG rear interior/harness, header, wiseco, EK SSR (mac_24_seven)
Do you see where it says it's pending? Do you know how many people I've turned down that's trying to buy them? It's because I'm trying to resolve the issue with the person I bought it from moron. You don't know how I conduct business so stop making an *** of yourself.
#13
Honda-Tech Member
iTrader: (1)
Re: itr motor, itr cams, rc, JDM EG rear interior/harness, header, wiseco, EK SSR (specie)
Hery MR... Dont freakin get snippy with me. I'm not the one who still has my thread saying I have ITR cams do I? I suggested you change the description in the thread several WEEKS ago when I almost bought the fraudulent cams.
First, you know you can have the moderator of the forum change the title right?
Second.. You didnt change the description of the cams from ITR to b17 did you? No. So even though you say "pending" they are still described as ITR cams when in fact, they are NOT.
I'm trying to do my very small part in keeping the site free from mis-information, which you have posted and have yet to resolve in your thread. Regardless of what yoru doing behind the scene, what you have posted in this thread is a lie.
And we know who the father of the lie is, don't we?
Have a nice day.
Modified by mac_24_seven at 4:43 AM 3/14/2007
First, you know you can have the moderator of the forum change the title right?
Second.. You didnt change the description of the cams from ITR to b17 did you? No. So even though you say "pending" they are still described as ITR cams when in fact, they are NOT.
I'm trying to do my very small part in keeping the site free from mis-information, which you have posted and have yet to resolve in your thread. Regardless of what yoru doing behind the scene, what you have posted in this thread is a lie.
And we know who the father of the lie is, don't we?
Have a nice day.
Modified by mac_24_seven at 4:43 AM 3/14/2007
#14
Honda-Tech Member
Thread Starter
Join Date: Feb 2001
Location: Clearwater, FL, USA
Posts: 2,503
Likes: 0
Received 0 Likes
on
0 Posts
Re: itr motor, itr cams, rc, JDM EG rear interior/harness, header, wiseco, EK SSR (mac_24_seven)
39 posts and you're at 98%. You are an ASSet to this community. I'm trying to get a set of itr cams in return for the ones I got. You're not buying anything in my thread, I suggest you stay off of it.
#15
Honda-Tech Member
iTrader: (1)
Re: itr motor, itr cams, rc, JDM EG rear interior/harness, header, wiseco, EK SSR (specie)
Actually... I have almost 1600 posts. Edit: Yay! I got my post count back!
For whatever reason, when I put in my location, it deleted my posts. Go figure.
Just do a search on my screen name sucker on threads I've created and posts I've made, you'll see how many I have.
But, I don't need to say anymore. The pics are up for all to see. If they still want to buy your cams, thats their fault, not mine. I've done my part.
Modified by mac_24_seven at 2:03 PM 3/14/2007
For whatever reason, when I put in my location, it deleted my posts. Go figure.
Just do a search on my screen name sucker on threads I've created and posts I've made, you'll see how many I have.
But, I don't need to say anymore. The pics are up for all to see. If they still want to buy your cams, thats their fault, not mine. I've done my part.
Modified by mac_24_seven at 2:03 PM 3/14/2007
#18
Honda-Tech Member
iTrader: (1)
Re: (NoahD)
Your ITR valve cover sure looks alot like my GSR valve cover.....
Maybe because an ITR valve cover should look like this?
I just happened to check and was happy to see the B17 cams are gone... and your valve cover happened to catch my eye.
Please change the description to a GSR valve cover.
#20
Honda-Tech Member
Re: itr motor, itr cams, rc, JDM EG rear interior/harness, header, wiseco, EK SSR (specie)
pretty sure the one without the H logo is the usdm itr cover (which he is selling) the JDM one has the H logo.. so give the guy a break it looks like a legit valve cover to me..
#22
Honda-Tech Member
Thread Starter
Join Date: Feb 2001
Location: Clearwater, FL, USA
Posts: 2,503
Likes: 0
Received 0 Likes
on
0 Posts
Re: itr motor, itr cams, rc, JDM EG rear interior/harness, header, wiseco, EK SSR (sohc95vtec)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sohc95vtec »</TD></TR><TR><TD CLASS="quote">pretty sure the one without the H logo is the usdm itr cover (which he is selling) the JDM one has the H logo.. so give the guy a break it looks like a legit valve cover to me..</TD></TR></TABLE>
thanks.
thanks.