FS- Parting Out 91 Civic + Turbo Kit + Plus motor. Blackworks | Greddy | Hasport
08-29-2011, 07:08 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2007
Location: Seffner, Fl, USA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
FS- Parting Out 91 Civic + Turbo Kit + Plus motor. Blackworks | Greddy | Hasport
Alright to start off dont wanna do any of this kinda forced to im moving away and need nothing but $$$ gotta sacrificethings you WANT for things you NEED. that being said every single thing off the car will be parted. I will take more detailed pictures later just took a few so you have general idea. HAVE A BUNCH OF MISC. parts BISIMOTO HEADER ETC... Please just READ anything else you need body wise just call me and i will give you a price i dont have everything listed
If you are out of the city i am paypal verified. so i can ship to wherever.
SOLD-
2.5 in full catback he is a lucky guy
SI TRANNY
passenger mirror
walbro 255 pump
dsm 450 injectors
front door speakers
cargo cover
passenger door
LEFT TAIL LIGHT & CENTER TAIL LIGHT PCE.
Hood
Rear hatch shocks
bumper support
sold-
d16 starter
Blackworks intercooler
EF intercooler piping
stanley corners
wiring harness
z6 vtec sil.
d16a6 block
Front coil overs
front seats
carpet
cluster
hood
fenders
bumper
spindles
hood cable
bumper filler
rear interior plastics
turbo
wastegate
Greddy type-s
813-451-6664 call no answer then text.
I will post a vin shortly i always do with all my cars so dont hound me.
As far as the turbo kit, most of it is brand new jus tmounts has never been ran except the bov and piping which i repainte over.
57 trim. 63 AR turbo brand new mounted no shaft play $125 firm with fittings for feed and return.
Blackworks sandwhich plate GOLD w/ feed line $35 firm
All piping with greddy type-s BOV, couplers and t- bolts together $225 firm ( payed over 100 for couplers and tbolt clamps by themselves!
greddy type-s $80 by itself.
Blackworks FMIC just mounted $100 firm
d16 cast iron mani, can use for b-series just cut flange. $60 firm New condition
38mm wastegate comes with extra springs also new condition just mounted $60 firm
dsm 450 w/ resistor box $80 firm
MOTOR-
d16a6 shortblock, y8 vtec head, with cable si short geared tranny. stg 3 clutch.
hasport mounts all around for d-series $200 firm extra stiff.
si tranny - $150 firm.
chipped p28 basemap for dsm 450 $100 firm just change map.
obd-=obd1 jumper harness $25 firm
longblock -350 firm.
bisi header, will take $250 firm without the cermaic coating was selling for $325 but never got it coated.
91 HATCH BODY-
anything you want interior i will sell door panels are CLEAAN
REAR SI seats 50 firm
both door panels $85 firm
front bumper with custom lip $50 firm comes with bumper lights (is cut out a little in the rear not too bad)
head lights $40 firm
corners stanley $30 firm
Have a//c parts for ef/crx as well most lines, blowers for underneathe dash, dryer $100 for it all.
extra ef hatch BLUE in color P firm
z6 bare block hot tanked decked and honed. have misc. parts for the block $150 ready for fresh build.
walbro 255 pump $50 firm primed maybe 5 times, new condition.
glove box $10
tail lights $40
2 passenger headlights 1 driver $20 ea.
obd1 d16 vtec dizzy - $40
obd1 alt $40
If you are out of the city i am paypal verified. so i can ship to wherever.
SOLD-
2.5 in full catback he is a lucky guy
SI TRANNY
passenger mirror
walbro 255 pump
dsm 450 injectors
front door speakers
cargo cover
passenger door
LEFT TAIL LIGHT & CENTER TAIL LIGHT PCE.
Hood
Rear hatch shocks
bumper support
sold-
d16 starter
Blackworks intercooler
EF intercooler piping
stanley corners
wiring harness
z6 vtec sil.
d16a6 block
Front coil overs
front seats
carpet
cluster
hood
fenders
bumper
spindles
hood cable
bumper filler
rear interior plastics
turbo
wastegate
Greddy type-s
813-451-6664 call no answer then text.
I will post a vin shortly i always do with all my cars so dont hound me.
As far as the turbo kit, most of it is brand new jus tmounts has never been ran except the bov and piping which i repainte over.
57 trim. 63 AR turbo brand new mounted no shaft play $125 firm with fittings for feed and return.
Blackworks sandwhich plate GOLD w/ feed line $35 firm
All piping with greddy type-s BOV, couplers and t- bolts together $225 firm ( payed over 100 for couplers and tbolt clamps by themselves!
greddy type-s $80 by itself.
Blackworks FMIC just mounted $100 firm
d16 cast iron mani, can use for b-series just cut flange. $60 firm New condition
38mm wastegate comes with extra springs also new condition just mounted $60 firm
dsm 450 w/ resistor box $80 firm
MOTOR-
d16a6 shortblock, y8 vtec head, with cable si short geared tranny. stg 3 clutch.
hasport mounts all around for d-series $200 firm extra stiff.
si tranny - $150 firm.
chipped p28 basemap for dsm 450 $100 firm just change map.
obd-=obd1 jumper harness $25 firm
longblock -350 firm.
bisi header, will take $250 firm without the cermaic coating was selling for $325 but never got it coated.
91 HATCH BODY-
anything you want interior i will sell door panels are CLEAAN
REAR SI seats 50 firm
both door panels $85 firm
front bumper with custom lip $50 firm comes with bumper lights (is cut out a little in the rear not too bad)
head lights $40 firm
corners stanley $30 firm
Have a//c parts for ef/crx as well most lines, blowers for underneathe dash, dryer $100 for it all.
extra ef hatch BLUE in color P firm
z6 bare block hot tanked decked and honed. have misc. parts for the block $150 ready for fresh build.
walbro 255 pump $50 firm primed maybe 5 times, new condition.
glove box $10
tail lights $40
2 passenger headlights 1 driver $20 ea.
obd1 d16 vtec dizzy - $40
obd1 alt $40
Last edited by 99EK-T; 10-18-2011 at 05:34 AM.
08-31-2011, 04:01 AM
#2
Honda-Tech Member
Thread Starter
Join Date: Aug 2007
Location: Seffner, Fl, USA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS- Parting Out 91 Civic + Turbo Kit + Plus motor. Blackworks | Greddy | Hasport
BUMP FOR THINGS SOLD, GIVE ME A CALL MIGHT HAVE WHAT YOU NEED
09-06-2011, 05:51 PM
#5
Honda-Tech Member
Join Date: Aug 2011
Location: Jacksonville FL
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS- Parting Out 91 Civic + Turbo Kit + Plus motor. Blackworks | Greddy | Hasport
how much would you want for the complete engine and trans (harness, ecu and all)? I was confused by the shortblock and head being one price but the long block another (I must be misunderstanding something). Please PM me. Also, is the bottom end stock?
Trending Topics
09-18-2011, 07:32 AM
#13
Honda-Tech Member
Thread Starter
Join Date: Aug 2007
Location: Seffner, Fl, USA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS- Parting Out 91 Civic + Turbo Kit + Plus motor. Blackworks | Greddy | Hasport
The oil line is fine, the ONLY reason i would believe the sandwich plate would not work is IF the oil filter tap thread is bigger then a single cams i believe the oil filter thread is the same thought but i could be wrong.
honestly i think it would work lmk its a blackworks SP cheap
honestly i think it would work lmk its a blackworks SP cheap
09-22-2011, 11:41 AM
#17
Honda-Tech Member
Thread Starter
Join Date: Aug 2007
Location: Seffner, Fl, USA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
09-23-2011, 04:43 AM
#18
Honda-Tech Member
Thread Starter
Join Date: Aug 2007
Location: Seffner, Fl, USA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS- Parting Out 91 Civic + Turbo Kit + Plus motor. Blackworks | Greddy | Hasport
front end sold, downpipe gone, starter sold injectors sold, walbro sold
Thread
Thread Starter
Forum
Replies
Last Post
crazi_E
Northeast (Sales)
5
08-16-2006 07:20 PM
Ef Love
Honda CRX / EF Civic (1988 - 1991)
14
12-06-2005 08:25 PM
