V2 competition drag wheels
#26
Join Date: Sep 2005
Location: San Gabriel, CA, 91776
Posts: 739
Likes: 0
Received 0 Likes
on
0 Posts
Re: V2 competition drag wheels
Lenso VPD is 10lbs 5 spokes. V2 Competition wheels are 11lbs 6 spoke.
We sell both wheels and they are both comparable with each other. Only difference is that some people prefer the 13x8 20offset from V2 Competition over the 13x7.5 25offset from Lenso. V2 Competition is coming out with matching skinnies in the near future. Good place to buy the V2 Competition Wheels/Tire package is Importparts, Evasive Motorsports, JHPUSA, Speedelement, Weaksauce, Highend Autosports, Streetlightz, Camp1320 and few other places. ben@importparts.com is the man to run to though for all tech Qs on this new product.
We sell both wheels and they are both comparable with each other. Only difference is that some people prefer the 13x8 20offset from V2 Competition over the 13x7.5 25offset from Lenso. V2 Competition is coming out with matching skinnies in the near future. Good place to buy the V2 Competition Wheels/Tire package is Importparts, Evasive Motorsports, JHPUSA, Speedelement, Weaksauce, Highend Autosports, Streetlightz, Camp1320 and few other places. ben@importparts.com is the man to run to though for all tech Qs on this new product.
#28
Re: V2 competition drag wheels
i have the v2 competition wheels i got from importparts with mt 24.5x9x13 fitment on them are good clears the calipers.... didnt need any spacers...
#29
Honda-Tech Member
Re: V2 competition drag wheels
Im assuming they should fit over Integra calipers no problem, but that is just assumption. Im thinking about buying a set personally.
#32
I'm really 2slow
Re: V2 competition drag wheels
^^ I think those are volks TE37's that came in 13X8. That picture is about 2 years old. V2's look the same.
Last edited by 2fast4u831; 04-02-2009 at 07:28 AM.
#36
Honda-Tech Member
Join Date: Dec 2007
Location: California, USA
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Re: V2 competition drag wheels
nice. thanks.
#38
Honda-Tech Member
Join Date: Mar 2008
Location: MidCaL
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Re: V2 competition drag wheels
v2s look really good ya but no skinnys to match so wuts the point? seen a set a cmi a few weeks ago look good but lenzos are better thats wut me and mt bro have cheap good looks and skinnys to match
check out wills new rims hes workin on from exospeed if your a baller blows welds and spinworks out the water
check out wills new rims hes workin on from exospeed if your a baller blows welds and spinworks out the water
#44
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: Corn Fields, PA
Posts: 2,325
Likes: 0
Received 0 Likes
on
0 Posts
Re: V2 competition drag wheels
I find it odd that Lenso's have been out for a while but only recently, about 2-3 years ago have they produced a matching skinny, people still rocked the Lensos, prior to the matching skinny. Now everyone is complaining because there is no matching skinny for these wheels.... Is this a fashion show or do you want traction?
#45
Re: V2 competition drag wheels
if you got some cash you could always get some customs from bogart...they are about 340 each which is about same price most are running right now. thats what i purchased and he has skinnes also if you want....and takes about 2 wks to made and at your door... i got mine with 4x114.3 and 4x100 drilled into them..FTW
#46
Honda-Tech Member
Join Date: Dec 2007
Location: California, USA
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Re: V2 competition drag wheels
i think the V2 would be more stronger wheel due to the 6 spoke design. Less deformity under load and probably less chance of tire slippage especially for high torque motors.
#47
Honda-Tech Member
Join Date: May 2008
Location: Mobile, AL
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
Re: V2 competition drag wheels
i just got my wheels in today. with the 22x9x13 MH slicks it doesnt clear my spindle arms......does anyone running 9" wide slicks with these wheels?
Last edited by ptftw; 12-21-2009 at 02:00 PM.
#50
Honda-Tech Member
Re: V2 competition drag wheels
Here's mine w/ 24x8 front 24x4.5 rear
I still run a front spacer on mine.