im going to get some traction bars for my car but im kind of torn one which ones i should get.....

just wondering which ones people are running and if they like them.....so far the one that i have found have been...z10, jimfab, lakewood, comp eng, and dark star.....they are the one i have found....

any help would be greatly appreciated

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Big Josh &raquo;</TD></TR><TR><TD CLASS="quote">im going to get some traction bars for my car but im kind of torn one which ones i should get.....

just wondering which ones people are running and if they like them.....so far the one that i have found have been...z10, jimfab, lakewood, comp eng, and dark star.....they are the one i have found....

any help would be greatly appreciated
</TD></TR></TABLE>

Z10 or Full Race.

 

DarkStar... AHAHAHAHAHA.

Full Race, Z10, or MB

 

JimFab

 

DTRFAB

 

For what it's worth, I have the Full-Race bars. The build quality is amazing, as are the materials used in construction. As well, I went from having enough wheel hop to break axles, to no wheel hop at all. I can't say enough good things about the Full-Race setup http://www.full-race.com

 

I have the full-race ones also

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pip9 &raquo;</TD></TR><TR><TD CLASS="quote">I have the full-race ones also </TD></TR></TABLE>

Same here

 

i have looked at the full-race site and haven't seen any pics or prices on them....how much are they and is there any pics????

 

Here you go:

http://full-race.com/store/ind...9674e

You just have to go to the online store section instead of the products section.

 

I got JIMFAB and havent had any problems. I ran his in my crx also

 

I just ordered Darkstar.. i bought their cam gears and they were a quality product so i figured i'd try out their traction bars as well..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ranta18 &raquo;</TD></TR><TR><TD CLASS="quote">DarkStar... AHAHAHAHAHA. </TD></TR></TABLE>

Is their a reason you're laughin or are you just being ignorant because its a company that you haven't yet heard of yet?.. Every company has to start somewhere and you'll have to hear it for the first time sometime..

Rather than just laughin at a company that i have no clue about, i am going to try these since their other product was a quality product with no problems.. i'll give ya a report on their performance once i get them..

 

Oh, trust me, I know the company and who they are. They're MMR's little side company that "makes" parts. Good luck with the bars and gears though. I wasn't laughing at the company as far as quality. They might actually be ok parts. I was just laughing at the company as a whole.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by allMotor93Hatch &raquo;</TD></TR><TR><TD CLASS="quote">JimFab </TD></TR></TABLE>

jimfab works perfect on my car

 

Darkstar is an overpriced Jimfab. Same manuf, just painted black and a Darkstart sticker on it.

 

I got them extremely cheap since i get a deal on all MMR stuff so i guess i got a cheap set of Jimfab Traction Bars

 

thanks for all the help....still aren't sure which ones to go with....but im really leaning toward the full-race bars

 

call me (303) 752-2422 (Sam @ Importsports Performance in Denver) I make all different kinds for different vehicles at the shop

 

ill give you a call somtime

 

I created a thread a while ago and never got a question, so I will ask it here... does anyone know if the Comp Engineering ones fit in a 92-95 h22 eg???

thanks.

 

All about the LCONN engineering Traction Bars the Best on the Market by Far

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by baxter04 &raquo;</TD></TR><TR><TD CLASS="quote">DTRFAB </TD></TR></TABLE>

 

Can somebody tell be what the traction bars do? I run a Civic Type R in the U.K. and have managed to run 13.3 but cannot get 60 ft below 2.1 I run an engine tuning shop so horsepower no problem but need to know how to get it to the ground?

 

The traction bars basically eliminate wheel hop. They absorb slop in your suspension bushings in the front end of the car.

Clayton