<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Clayton &raquo;</TD></TR><TR><TD CLASS="quote">Ok, can someone tell me if I am on crack or what, but these look to be on backwards. I am looking at the mount on the inboard end of the torsion style bar. The attachement anchors look to be waaaay too highly streesed for me. Or are they supposed to look like this??



Clayton</TD></TR></TABLE>
The bracket that is on the control arm is backwards.

art

 

Woot! It's nice to be right once in awhile.

Thanks Art

Clayton

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DSF &raquo;</TD></TR><TR><TD CLASS="quote">

Is it me or do the lower control arm brackets look like they are reversed? Those heim joints look to be at horrid angles. </TD></TR></TABLE>

That's the only way they will fit i think the design was for a B ser not H setup if we reveresed it it would have hit the oil pan. My 60ft with this setup is a 1.883.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92h22a &raquo;</TD></TR><TR><TD CLASS="quote">

That's the only way they will fit i think the design was for a B ser not H setup if we reveresed it it would have hit the oil pan. My 60ft with this setup is a 1.883.</TD></TR></TABLE>
what mounts are you using...that's probably your problem, it's not the bars. I'm using the same bars as you. My 60fts are 1.63-66's

 

anybody have pics of teh jim fab bars when the car is on the ground yet?