Timed my EF 4 door today
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2004
Location: San Diego
Posts: 1,351
Likes: 0
Received 0 Likes
on
0 Posts
Timed my EF 4 door today
A couple months ago i bought an EF 4 door. I thought it would be a fun sleeper/sfwd project. I put the turbo set up from my EF hatch on it and pieced together an LS vtec motor.
It went 11.85@120.2 with a 1.97 60ft (stock suspension) on 17psi with full interior untuned. Today was its first time out at the track so I wasn't expecting much. With a little more seat time more boost and some tunning im hoping to see some low 11's high 10's.
Heres the run down
60ft 1.971
330ft 5.200
1/8et 7.778
1/8mph 96.64
1/4et 11.857
1/4mph 120.21
It went 11.85@120.2 with a 1.97 60ft (stock suspension) on 17psi with full interior untuned. Today was its first time out at the track so I wasn't expecting much. With a little more seat time more boost and some tunning im hoping to see some low 11's high 10's.
Heres the run down
60ft 1.971
330ft 5.200
1/8et 7.778
1/8mph 96.64
1/4et 11.857
1/4mph 120.21
#5
Honda-Tech Member
Thread Starter
Join Date: Jan 2004
Location: San Diego
Posts: 1,351
Likes: 0
Received 0 Likes
on
0 Posts
Re: Timed my EF 4 door today (speeddave)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by speeddave »</TD></TR><TR><TD CLASS="quote">nice numbers whats the setup?</TD></TR></TABLE>
Thanks man, Its a pretty simple setup
B16 head
port flow inner springs and stock outers
ty retainers
type r cams & int man
B18B block
flat top JE pistons (stock bore)
eagle rods
rage block guard
arp head studs
ctr pulley
Drag manifold
delta gate
Garret t3/t04b
inline pump
vafc
Its also has a direct port kit, But i dont plan on using it until the car gets tuned and some better suspension, Im aiming for low 11's high 10's on just boost.
Thanks man, Its a pretty simple setup
B16 head
port flow inner springs and stock outers
ty retainers
type r cams & int man
B18B block
flat top JE pistons (stock bore)
eagle rods
rage block guard
arp head studs
ctr pulley
Drag manifold
delta gate
Garret t3/t04b
inline pump
vafc
Its also has a direct port kit, But i dont plan on using it until the car gets tuned and some better suspension, Im aiming for low 11's high 10's on just boost.
Trending Topics
#14
* B A N N E D *
Join Date: May 2004
Location: SAN DIEGO CLAIREMONT, CA, 92117
Posts: 33,383
Likes: 0
Received 0 Likes
on
0 Posts
Re: Timed my EF 4 door today (michaelOlson)
hard to believe because some try to to be haters and not take other peoples word
believe it man it went 11's
believe it man it went 11's
#16
Honda-Tech Member
Re: Timed my EF 4 door today (Pooptooth)
nice setup, and the times are very believable. Keep in mind that car (DX sedan) weighs about the same as an EG hatch. My 89 DX sedan would do 14s all day with the dual-cam ZC and I/H/E.
#18
Honda-Tech Member
Re: Timed my EF 4 door today (tkHBseries)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tkHBseries »</TD></TR><TR><TD CLASS="quote">11.8 hard to believe....no roll cage either, post up the time slips next time! </TD></TR></TABLE>
I believe it.
I believe it.
#19
Member
Join Date: Apr 2003
Location: Slut City aka San Diego, Ca, United State Of King
Posts: 3,061
Likes: 0
Received 0 Likes
on
0 Posts
props to team skr and the homie scott at b-series.. i have can believe this cars is in the 11's becuz b-series always comes out with fast cars.. .....(team inertia)..
#20
Honda-Tech Member
Join Date: Apr 2003
Location: San Diego
Posts: 9,041
Likes: 0
Received 0 Likes
on
0 Posts
Re: (SpoodgeDc2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tkHBseries »</TD></TR><TR><TD CLASS="quote">11.8 hard to believe....no roll cage either, post up the time slips next time! </TD></TR></TABLE>
thats kinda funny, because his b16 turbo hatch went 10.88 with out a cage also (thats why he got kicked off the track) im pretty sure he got kicked out of the track again....
hey Scotty, its Andres Ty's homie let me scan those slips for you and post them up(like i told u last time at the shop) to shut down the haters...also i can put the vid of your 10.88 pass on the NET if you want foo....nice times though....whens the hatch comming out again???
thats kinda funny, because his b16 turbo hatch went 10.88 with out a cage also (thats why he got kicked off the track) im pretty sure he got kicked out of the track again....
hey Scotty, its Andres Ty's homie let me scan those slips for you and post them up(like i told u last time at the shop) to shut down the haters...also i can put the vid of your 10.88 pass on the NET if you want foo....nice times though....whens the hatch comming out again???
#22
Honda-Tech Member
Thread Starter
Join Date: Jan 2004
Location: San Diego
Posts: 1,351
Likes: 0
Received 0 Likes
on
0 Posts
Re: (EJBomexCoupe)
Thanks everyone,
The 4 door started out as a joke but i think its got some potential, The night before i ran it i was getting the car ready and we were trying to predict what it was going to run. My friend Joey said in the 11.20's another friend said 11.30's and i said a good day would be 11.50's and below. Then i crazy jinxed myself and said "that will suck if it goes high 11's with a shitty 60ft" and what do i run 11.85 w/1.97 60ft. Oh well, i got some pretty good excuses why it didn't hook up but ill save you guys the time. I made some suspension changes and finished up the direct so next time it goes out its going to have a 100 more hp in 3rd and 4th if you know what im sayin But don't ask me what i think its going to run because i aint sayin **** .
Modified by Rusty Shackleferd at 10:50 AM 7/9/2004
The 4 door started out as a joke but i think its got some potential, The night before i ran it i was getting the car ready and we were trying to predict what it was going to run. My friend Joey said in the 11.20's another friend said 11.30's and i said a good day would be 11.50's and below. Then i crazy jinxed myself and said "that will suck if it goes high 11's with a shitty 60ft" and what do i run 11.85 w/1.97 60ft. Oh well, i got some pretty good excuses why it didn't hook up but ill save you guys the time. I made some suspension changes and finished up the direct so next time it goes out its going to have a 100 more hp in 3rd and 4th if you know what im sayin But don't ask me what i think its going to run because i aint sayin **** .
Modified by Rusty Shackleferd at 10:50 AM 7/9/2004
#24
Honda-Tech Member
Re: Timed my EF 4 door today (Typesi2nv)
I saw you driving this afternoon - you were pulling away from home depot. My friend was all - hey i saw that guy - he posted on honda-tech.
props!
liam