Slick roll out?
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2005
Posts: 1,544
Likes: 0
Received 0 Likes
on
0 Posts
Slick roll out?
I just got my first set of slicks and one is 72" and the other is 72 5/8 is that too much of a diffrence? ALso ive read that you can blow the smaller one up, let it stand for a bit and recheck the roll out. That it may stretch it?
#4
Honda-Tech Member
#5
Honda-Tech Member
Thread Starter
Join Date: Sep 2005
Posts: 1,544
Likes: 0
Received 0 Likes
on
0 Posts
Re: Slick roll out?
It doesnt state how long to really inflate it to try and stretch it. Wondering if any of you guys have real world experience and if this is within the "stretching limit"?
Trending Topics
#10
Honda-Tech Member
Thread Starter
Join Date: Sep 2005
Posts: 1,544
Likes: 0
Received 0 Likes
on
0 Posts
Re: Slick roll out?
Well I messured myself instead of going off of what was on the tires and I got 72 even and 72 3/16. I aired the small one up to right at 30 psi let it sit in the sun for about 30-35 mins. let her down and re messured and it was dead one by the eye laser so it did work!!!
I guess I got lucky on perfect timing and PSI in the tire. Good luck to others who may have to do this and hope this helps someone in the future.
I guess I got lucky on perfect timing and PSI in the tire. Good luck to others who may have to do this and hope this helps someone in the future.
Thread
Thread Starter
Forum
Replies
Last Post
Dan GSR
Road Racing / Autocross & Time Attack
10
01-25-2003 11:14 PM