For sale 4" ceramic coated downpipe for bseries topmount manifold $250.,3" downpipe for ramhorn $200. and t3 ramhorn with 44mm wastegate flange $600.can't upload photos from my phone but willing to email it to anyone who could help upload them.

 

FS: CARRILLO pro-A I beam rods for 89mm ls/b20 crank. 420 grams each. ~3,000 miles on them. Asking 550OBO shipped. Located in Sioux Falls SD.
Text only 605-261-4463
Thanks

 

Sold!!!!!!!!!!

 

This is a Driveshaft Shop 5.9 (800 HP) axle and hub for B-Series, fits 92-00 Civic and 94-01 Integra. Includes Integra DC2 spindles with new NTN wheel bearings. Also includes upper control arms and intermediate shaft, as pictured. These axles were used for 10 passes on 24.5" slicks and 600 HP, they're almost new.

DSS 5.9 $1450 shipped to lower 48 US.
--------------------------------------------------------------------------------------------

Also I have a B-Series top mount exhaust manifold made by Dana Westover at Virtual Works. Its made of stainless steel, and all TIG welded. The inlet flange is a T4 Divided, and comes with two Tial V38 waste gates. The wastegates were ran for 1-season, so they still have a lot of life in them. The manifold was originally built with 2-bolt flanges for the Tial F38 wastegates, but I had them replaced recently. I ran it in my 96 Integra 4-door, and my 95 Civic.

VW Manifold $1200 shipped to lower 48 US.
--------------------------------------------------------------------------------------------
Next is a Precision Turbo 750 Intercooler, and Intercooler Pipes made for a 95 Civic. The car had a LSVTEC engine, a top mount turbo manifold, a Golden Eagle Intake Manifold, and a 3" Throttle Body. The pipes DO fit behind the stock EG front bumper. The grill of the front bumper needs to be cut out to fit. The Blow Off Valve Flange is for a TIAL 50 (not included). This Intercooler was not in a street car, and has no rock damage.

The first IC pipe from the turbo is 2.5". The second pipe is 2.75". The third pipe to the throttle body is 3". All of the Silicone couplers are from ATP Turbo, and they transition to the next size pipe, and are included with this sale. All the T-Bolt clamps pictured are made by Clampco, and are also included. The Intercooler pipes are made of mild steel, and they have been boost leak tested. No Leaks.

PT 750 Intercooler and pipes $825 shipped to lower 48 US.
Jarrod

 

TESTING WATERS - TURN KEY DRAG CAR PART OUT

Caged Shell- 8 point

10:1 CP compression Turbo tuff AEBS sleeved block

SKUNK 2 head port and polish

AFI custom turbo kit

Liberty faceplated race trans


http://hondamarketplace.com/showthread.php?t=3169118

Ryan

804-536-3879

text for more pictures or questions

 

prices do not include pp fees or shipping.
the shipping can be negotiable!

id injectors hardly used $400

gsr mainshaft $50

obd2b to obd1 75

 

I'm selling this setup for a friend of mine. I am located in Edmonton Alberta but am willing to ship.

The manifold is a Full race k series sidewinder, divided T4 that's setup for twin 44mm gates. It also has bungs welded on it for the AEM 4 chan UEGO setup to monitor all cylinders. I also have a 4" down pipe and dump tubes that are made to work with the manifold.

http://www.full-race.com/store/turbo...-manifold.html


1. Fullrace k-series sidewinder manifold. T4 divided flange with dual 44mm wg flanges used. Quality on this unit is second to none. Was used on the first 8 sec k series setup. comes with 4" downpipe and wg tubes.
$1200.00 with wg dumps and downpipe.


2. AEM 4 channel UEGO bosch wideband kit 30-2340 reg price $570.00 Selling for $480.00
-4-Channel Wideband UEGO Controller
-No free air calibration required - ever
-Four unique differential analog outputs
-CAN output for use with AEM EMS or CAN enabled devices


3. AEM UEGO sensor kit 30-2001 bosch wideband (3 of these) reg price $97.00 selling for 80.00 each

 

Re: August FS Thread

72mm GT42R ball bearing 1.15A/R still usable needs new exhaust wheel or rebuilt $1200obo



AEM PN:30-1060 OBD II brand new never used $600


Skunk2 Racing B-series radiator hose kit like new $80

Skunk2 Racing billet vtec solenoid like new $80

MSD coil p/n8253 $80

Brand new Evolution Industries b-series light weight flywheel 11.5lbs $160

Used Moroso battery box only $75



Used Garrett T4 1.28 A/R housing for all GT42 and GTX42 $320

M&H 26x8.5x15 Slicks ONLY like new $275

 

Rolling shell-$10k non neg price! Don't ask! This is a crackhead price! 25.5 cert chassis, Progress custom coil over setup, custom front, shaved bay, custom flat paint by Goolsby customs, fiberglass tailgate, CCC spoiler, carbon hood, weld ...rear skinny's, Exospeed 15x9 fronts with 26x9 toyo's, Kirky seat, stroud window net, custom staging brake, stroud parachute, sumped tank, Mfactory LCA, and I don't know what else I'm forgetting. I also have enough carbon wrap to do the hood, tailgate, and rear diffusers. I will do that before it leaves here.








Chase Bays b series mil spec harness-$1000

Custom torsion bar setup from EG hatch-$500

Weldon fuel filters I think they are 10 & 50 micron-$100

AEM fuel rail with sample valve and SX regulator-$250

Racepak Logger dash-$1000

Weldon 2025 fuel pump with fresh rebuild from Weldon-$600

MSD Digital 7 plus 75314 ignition box-$500

 

M&h slicks 25x8.7x13 for sale 350 shipped
3 passes

 

Holset hx35w.. has 12cm exhaust housing and already set up for a 3in v band.. turbo was just rebuilt.. had it in my crx and im planning on changing my setup around.. that's the only reason why im selling.. turbo is in great condition no leaks or smoking.. 0 miles on it since rebuild.. $450 obo plus shipping and paypal fee's.. .. looking to sell asap.. shoot me a pm or email me @rotorypower1988@gmail.com

 

225 shipped anywhere in the US of A

4 PTE 1000cc injectors for sale

PTE 1000cc inj will include clips and resistor box for applications that need it
Inj have been cleaned and flow tested and will have sheet to back it up.
Inj were used with 93 octane fuel ONLY.

 

for sale like new precision pte 6076E turbo journal bearing. rated to 610whp. t3 63ar 4bolt exhaust. has maybe 200 miles and dyno tuning. it made 543whp 22psi on a customers stock k20a3 with meth inj and pump gas!! turbo is in great shape. reason for selling is he went built bottom end and gtx35r.
also for sale is a blox 74mm throttle body for honda b/f series with speed factory 4 bar map sensor and tps. includes bolts!

throttle body complete $180.00 shipped with paypal fees included!

pte 6076 $420.00 SHIPPED with paypal fees included!

paypal only! usps priority on tbi and ups ground on turbo!
call or txt anytime! 5757493103 rock

 

Competition Clutch Twin disk with Spec flywheel $550.00
T1 WEB Cams 444/595 Grind $550.00
STR intake,72mm STR throttle Body, $300.00
Sperco A1000 water air intercooler, Passenger side water tank, Meziere water pump, 16AN water lines $650.00
Ferrera PRO series Valve Train, springs and retainers $250.00

Please included shipping and Paypal fees

All pics won't upload, send message for more pics

 

SELLING MY LIKE NEW MINT AEM EPM AND RYWIRE COP SUB HARNESS. EVERYTHING IS IN MINT CONDITION NO ISSUES AT ALL. DECIDED TO GO WITH A T1 TRIGGER KIT SINCE IM GETTING A MIL SPEC HARNESS DONE. WILL SHIP AT BUYERS EXPENSE. IF YOU HAVE ANY QUESTIONS PLEASE LET ME KNOW. THANKS

JON 760-936-2053

AEM EPM-240
RYWIRE COP HARNESS-120

 

Hey here is what I have:

BRAND NEW T4 Topmount made by Aldo mirales from team1320
******^*OBO*******Payed almost a grand and Im asking $675

http://s213.photobucket.com/user/Col...05_n.jpg.html][/URL]

 

All Prices include shipping and paypal:

Turbo XS Quad stage boost controller 250
Msd Time Based Switch 250
Borg Warner s300sx"s366" t4 .91 twin scroll NEW IN BOX 650

775-229-1194 call or text for questions

 

For sale AEM EPM (part number 30-3255) SOLD!!!
Skunk2 Pro Series black cam gears (part number 304-05-5205) brand new only removed for pictures $240 shipped in the states.
865-202-3536

 

b18c1 gsr supercharger kit $1500

innovative mounts steel with black bushings dyno use only $180 shipped plus paypal fee sold...sold....sold

 

Autometer Pro Shift-Lite Level 1, Black Housing, Amber Lens
Tube-style shift light, with innovative AIM swivel mount for precise viewing angles. Features single programmable digital shift point, digital RPM display and single color shift light. $120 Free Shipping





Autometer Ultra-Lite Full Sweep Electric Water Temp Gauge, 100-260 Degrees F, 2 1/16 in. $120 Free Shipping



Autometer Ultra-Lite Full Sweep Electric Oil Pressure Gauge, 0-100 PSI, 2 1/16 in. $160 Free Shipping

 

looking to trade for a set of itbs or sell for 900 pretty much new installed n dyno time 904 226 8240

 

....

 

SOLD! Thanks!

 

Got some parts on sale, located on mission tx

1600cc injectors precision, need resistor box or injector driver, 230.00 shipped







Arm injector driver, harness included , 125 shipped

 

Will trade some parts for m&w 10 ignition

75.5 mm vitara pistons/fj cutom length rods $ 320.00 shipped





Blox camshafts brand new still on sealed bag 250.00 shipped