looking to run high nine with this setup and unsure if its possible.
b16
bws362
peakboost topmount
precission fmic 600hp
s300
3in. dp

in a 00 civic si.

looking to make about 650whp
what im looking for is number one can this turbo on the motor make that kind of hp and number two is anyone running a em1 b16 into high nines. where gonna do some weight reductions to get it down to about 2300 with driver however I just have doubts about this being possible. Im not looking to bench race here I know its driver and car and temp and all sorts of factors im just wondering if its possible. please let me know what you think. also should let you know we plan on tuning with c16 not a street car drag car only.

 

Yea thats perfectly attainable, just get a nice chassis setup and drive the wheels off it and you'll be all set

 

Its that simple!

 

Thats really good to hear I know we where shooting for a low ten with the car however ive been reading about a lot of people hitting high nines with a 35r and from what ive read this s362 is suppose to be a little better than that.

 

If I could build a car in my driveway that did it with a D-series I would hope it's that simple for the rest lol

 

well i'll be doing this one in a driveway except for tuning and cage work but im hoping for the best.

 

You'll be fine, just don't get discouraged as it may take some time. But the formula is there

 

understandable i know im not going to just go out there first run on the new setup and run a 9.90... it would be awesome if it happend but i doubt it i just wanted to see if it was doable and from what im hearing it sounds like it might be. I'll keep you guys posted and just be looking for a finally hit nines topic in drag racing when it happens.