May F/S Thread
#53
Honda-Tech Member
iTrader: (1)
Join Date: Aug 2007
Location: beech bottom, wv, us
Posts: 1,050
Likes: 0
Received 0 Likes
on
0 Posts
Re: May F/S Thread
Mil Spec plug 61 pin. Comes with pins and removal tool. 150$
BNIB STROUD window net. Part number 877-5011 on jegs. They mailed 2 so there loss. 36$ new. I'll sell for 15$. SOLD.
Misc PIC hard rubber bushings. Rear LCA, rear camber arm, front UCA, sway bar bushings. Name prices will sell individually.
BNIB STROUD window net. Part number 877-5011 on jegs. They mailed 2 so there loss. 36$ new. I'll sell for 15$. SOLD.
Misc PIC hard rubber bushings. Rear LCA, rear camber arm, front UCA, sway bar bushings. Name prices will sell individually.
Last edited by rogueeg6; 05-18-2011 at 01:27 PM.
#54
Honda-Tech Member
Join Date: Jan 2006
Location: all over, CT
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Re: May F/S Thread
G Force Long shifter BRAND NEW never installed- $500 shipped
GSR quaife BRAND NEW-$700 shipped
Precision 825 FMIC with 3inch charge pipes and Tial BOV-$450 shipped
GSR quaife BRAND NEW-$700 shipped
Precision 825 FMIC with 3inch charge pipes and Tial BOV-$450 shipped
#55
Honda-Tech Member
Join Date: Dec 2004
Location: mobile, al, 36608
Posts: 488
Likes: 0
Received 0 Likes
on
0 Posts
Re: May F/S Thread
F/S
1. WORK EQUIP 03 custom offset, for FWD drag racing wheels. Front 15x10 +0 offset, Rear 15x7 +23 offset. 4x100 lug pattern. Paid $2500 and waited 6 months for these to be made. Less than 2k miles. Excellent fitment, looks SICK ! Has holes for bead lock screws. Very rare and in PERFECT condition ! Asking $1300 plus shipping, local pickups welcome.
Please PM me if you have any questions or offers.Thanks for looking !
text me for faster response, 251-327-8094 thanks !
1. WORK EQUIP 03 custom offset, for FWD drag racing wheels. Front 15x10 +0 offset, Rear 15x7 +23 offset. 4x100 lug pattern. Paid $2500 and waited 6 months for these to be made. Less than 2k miles. Excellent fitment, looks SICK ! Has holes for bead lock screws. Very rare and in PERFECT condition ! Asking $1300 plus shipping, local pickups welcome.
Please PM me if you have any questions or offers.Thanks for looking !
text me for faster response, 251-327-8094 thanks !
Last edited by rare92gsr; 05-14-2011 at 07:21 AM.
#56
Honda-Tech Member
iTrader: (5)
Join Date: Mar 2009
Location: sunshine state
Posts: 984
Likes: 0
Received 0 Likes
on
0 Posts
Re: May F/S Thread
sup honda-tech i got a built ls block im putting up for sale it only has 200 daily driven miles on it with 6 dyno runs and about 5-6 1/8th mile passes on it the reason im selling it is i want to make more power then the block is built for which is 500hp looking to make 750ish hp so i bought a built sleeve block and need to sell this one to help with the finshing up of the new motori have 2400 into this block here are the specs motor was built by src racing here in florida motor is still in the car im going to drop it this weekend
b18b1 stock sleeve
81.5mm cp pistons 10:1
eagle rods
ls crank
balanced and blueprinted
cant remember if its acl bearings or cleavit
block was surfaced aswell
type r oil pump and gsr water pump
i will take 1500 pick up or 1650 shipped and insured
here are some pics when it was being installed
dyno video
http://www.youtube.com/watch?v=hXsYt5eENiY
update i took of the head today i wanted to drop the whole motor but due to rain i could only get this done but you can see the pistons and walls are in good shape
b18b1 stock sleeve
81.5mm cp pistons 10:1
eagle rods
ls crank
balanced and blueprinted
cant remember if its acl bearings or cleavit
block was surfaced aswell
type r oil pump and gsr water pump
i will take 1500 pick up or 1650 shipped and insured
here are some pics when it was being installed
dyno video
http://www.youtube.com/watch?v=hXsYt5eENiY
update i took of the head today i wanted to drop the whole motor but due to rain i could only get this done but you can see the pistons and walls are in good shape
Last edited by ls_on_boost; 05-15-2011 at 03:10 PM.
#57
Re: May F/S Thread
Exospeed star 8 13x8 with MH 24.5 x 8.5, tires have less than 10 passes/burnouts. located in southern california, pick up only, please no low ballers. call or text 5103866739. price is $800 obo.
Last edited by dailyspecvtec; 05-18-2011 at 11:45 PM.
#59
Re: May F/S Thread
Got some left over good parts for sale from my last built .......
Rci race jacket xxl black and white used only 2 times 65.00 .....bosh 044 racing fuel pump with bracket it's inline like new 120.00............3inch core intercooler 2/5 outlets 100.00.....blitz blowoff valve rs works perfect with flange 80.00.......pm if interested or text...978-319-5988
Rci race jacket xxl black and white used only 2 times 65.00 .....bosh 044 racing fuel pump with bracket it's inline like new 120.00............3inch core intercooler 2/5 outlets 100.00.....blitz blowoff valve rs works perfect with flange 80.00.......pm if interested or text...978-319-5988
#60
Re: May F/S Thread
delete if you want. i know there are shop owners and engine builders in here.
Kwik-way svsd Valve grinder around 6500 new asking 3000
pm for pics
SOLD
Kwik-way svsd Valve grinder around 6500 new asking 3000
pm for pics
SOLD
Last edited by SpoolinDa; 05-31-2011 at 10:50 AM.
#61
Re: May F/S Thread
FOR SALE
1992 EG hatch Shell
Fresh paint
JOJO 3 piece front end
fiberglass hood
5 point cage with driver door swing out (Done at T1)
carbon fiber duck bill
sumped gas tank
coilovers
$3500 OBO
1992 EG hatch Shell
Fresh paint
JOJO 3 piece front end
fiberglass hood
5 point cage with driver door swing out (Done at T1)
carbon fiber duck bill
sumped gas tank
coilovers
$3500 OBO
#62
Honda-Tech Member
Re: May F/S Thread
#65
Honda-Tech Member
iTrader: (1)
Join Date: Feb 2005
Location: Salt Lake City, Utah
Posts: 1,508
Received 0 Likes
on
0 Posts
Aeromotive fuel system
A1000 pump, only about 5 hrs of run time and a couple dyno passes. Decided to go with a bigger setup. Also, for sale 2 x Aeromotive 100 micron filters...practically brand new, some scuffing due to wrench tightening. Prices are shipped to your door (I ship quick) paypal fees not included....please add.
A1000 Fuel Pump - SOLD
100 Micron Filters - $65 each shipped
Also have some -10 fittings - $8 each
10ft of -10 hose - $65
A1000 Fuel Pump - SOLD
100 Micron Filters - $65 each shipped
Also have some -10 fittings - $8 each
10ft of -10 hose - $65
Last edited by Ron Burgandy; 05-18-2011 at 06:34 PM. Reason: sold items
#68
Honda-Tech Member
Join Date: Sep 2009
Location: jersey
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Re: May F/S Thread
used but just recently rebuilt tial 44. new diaphragm, valve, and guide. i do not have the fire ring, or clamps for it. silver one is the one for sale, black is sold. asking $275obo
#69
Honda-Tech Member
Join Date: Dec 2008
Location: dirty dallas
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Re: May F/S Thread
Parting out a customers car...All parts are working most prices are firm....
dss 5.9 axles w/ hubs $1100
hondata s300 with boost option $500
lenso vpd wheels gold with good slicks $800 (all four)
hks civic suspension $600
gsr quaife transmission mint* $1000
fullybuilt b16 skunk 2 everything head $1500 with stage 2 cams
gsr sleeved block with maney rods endyn pistons darton sleeves $2200
mw pro 10 ign kit with harness and coil $600
inovative solid mounts $250
t1 catchcan $250
edelbrock victor x manifold with str throttlebody $350
rc 1000cc injectors $250
complete ramhorn turbo kit ,precision 6265 turbo and custom 3 inch piping, custom down pipe, custom dumptube, tial wastegate tial bov, lines etc. $1800 pics can be sent through text.........214-576-6367
dss 5.9 axles w/ hubs $1100
hondata s300 with boost option $500
lenso vpd wheels gold with good slicks $800 (all four)
hks civic suspension $600
gsr quaife transmission mint* $1000
fullybuilt b16 skunk 2 everything head $1500 with stage 2 cams
gsr sleeved block with maney rods endyn pistons darton sleeves $2200
mw pro 10 ign kit with harness and coil $600
inovative solid mounts $250
t1 catchcan $250
edelbrock victor x manifold with str throttlebody $350
rc 1000cc injectors $250
complete ramhorn turbo kit ,precision 6265 turbo and custom 3 inch piping, custom down pipe, custom dumptube, tial wastegate tial bov, lines etc. $1800 pics can be sent through text.........214-576-6367
#70
Honda-Tech Member
Join Date: Dec 2004
Location: Plano, TX
Posts: 458
Likes: 0
Received 0 Likes
on
0 Posts
Re: May F/S Thread
Arias 83mm turbo pistons... BNIB asking $400
Arias Forged Piston: B16/B18 83mm 8.1:1 - 9.5:1
Application/Compression
B16A - 8.2:1
B17A - 8.4:1
B18A/B - 9.2:1
LS w/ B16 Head - 9.5:1
LS w/ GSR Head - 9.4:1
B18C1/GSR - 9.4:1
Arias Forged Piston: B16/B18 83mm 8.1:1 - 9.5:1
Application/Compression
B16A - 8.2:1
B17A - 8.4:1
B18A/B - 9.2:1
LS w/ B16 Head - 9.5:1
LS w/ GSR Head - 9.4:1
B18C1/GSR - 9.4:1
#71
Honda-Tech Member
Re: May F/S Thread
Rays Engineering Volk TE37 Drag pack - 1800.00
13" fronts on Micky Thompson 24.5 slicks
16" rears on Kumo street tires.
Spoolin Performance Ramhorn Manifold - 450.00
Ceramic coated
D series, t3 turbo flange, 38mm wastegate flange
Comp STG4 D series clutch, BNIB - 325.00
Bisi 3.6 d16z6 cam - $425.00
Never ran, in orig packing.
#72
Honda-Tech Member
iTrader: (1)
Join Date: Mar 2008
Location: Blah Blah Blah, wa, Erf
Posts: 2,938
Likes: 0
Received 7 Likes
on
6 Posts
Re: May F/S Thread
I have a Saenz forged straightcut syncro engaged gearset for Honda Prelude/Accord (H/F series) trannys. I have owned the set for 3 years or so. Originally I bought it from Scott at collective racing. I have had it in my Accord making anywhere from 620-750WHP. It has upgraded third and fourth gearsets in it and New Syncrotech syncros (Less than 250 miles on the 1, 3 and 4)
The gearset alone goes for 3200 US dollars new, with it will come EVERYTHING you need to run it including perfect functioning hubs, sliders, (NEW)syncros, and 4.266 (prelude) counter shaft. In addition to this, I will also include the shift forks, extra 3/4 hub and slider and I have and a couple extra syncros (have 1 or 2 carbon ones laying around for it if I recall correctly). Basically youll have everything you need to install it, shim the mainshaft bearing for proper mainshaft endplay and youre good to go. NO GRINDING WHATSOEVER.
Before getting my hands on it, I broke 15-16 OEM transmissions ripping all the teeth off 2nd and 4th gears. I havent had any issues breaking anything in this set. It has seen 650 WHP for years and 10 or so 750WHP I drive the car on the street ALOT, The set has wear on it, but is absoulutely reliable. It was the ONLY reason I didnt sell the car when it started breaking 2 trannys a weekend after I found it. It is SUPER strong.
Gear ratios are as follows:
1 3.071
2 2.153
3 1.647
4 1.30
5 1.05
Final Drive countershaft is a 4.266 out of a M2A4 JDM trans. It is fresh and hasnt been in my car for more than about 1000 miles. It made a notable difference in my heavy Accord.
Also I have all the contact information for Saenz US parts distributor should you ever need anything, and I get a 20% discount on hardware. They produce gearsets for a number of types of motorsports. They rate it t0 800 hp. I didnt break it making 750/575,
It sounds awesome (Yes it whines quite a bit), shifts SWEET and smooooth. Its a great deal for someone breaking alot of H gears :O)
Youll get the entire gearset installed on the counter(4.266 prelude FD) and mainshafts with all neccessary shims and spacers, shift forks, extra hub and slider assembly extrra syncros and syncro rings,
Here are a couple pics:
Please feel free to get in touch for any questions.
2000 firm, NO DEALS, NO TRADES. CASH ONLY.
The gearset alone goes for 3200 US dollars new, with it will come EVERYTHING you need to run it including perfect functioning hubs, sliders, (NEW)syncros, and 4.266 (prelude) counter shaft. In addition to this, I will also include the shift forks, extra 3/4 hub and slider and I have and a couple extra syncros (have 1 or 2 carbon ones laying around for it if I recall correctly). Basically youll have everything you need to install it, shim the mainshaft bearing for proper mainshaft endplay and youre good to go. NO GRINDING WHATSOEVER.
Before getting my hands on it, I broke 15-16 OEM transmissions ripping all the teeth off 2nd and 4th gears. I havent had any issues breaking anything in this set. It has seen 650 WHP for years and 10 or so 750WHP I drive the car on the street ALOT, The set has wear on it, but is absoulutely reliable. It was the ONLY reason I didnt sell the car when it started breaking 2 trannys a weekend after I found it. It is SUPER strong.
Gear ratios are as follows:
1 3.071
2 2.153
3 1.647
4 1.30
5 1.05
Final Drive countershaft is a 4.266 out of a M2A4 JDM trans. It is fresh and hasnt been in my car for more than about 1000 miles. It made a notable difference in my heavy Accord.
Also I have all the contact information for Saenz US parts distributor should you ever need anything, and I get a 20% discount on hardware. They produce gearsets for a number of types of motorsports. They rate it t0 800 hp. I didnt break it making 750/575,
It sounds awesome (Yes it whines quite a bit), shifts SWEET and smooooth. Its a great deal for someone breaking alot of H gears :O)
Youll get the entire gearset installed on the counter(4.266 prelude FD) and mainshafts with all neccessary shims and spacers, shift forks, extra hub and slider assembly extrra syncros and syncro rings,
Here are a couple pics:
Please feel free to get in touch for any questions.
2000 firm, NO DEALS, NO TRADES. CASH ONLY.
#73
Honda-Tech Member
Join Date: Jul 2003
Location: columbus, ohio, usa
Posts: 441
Likes: 0
Received 0 Likes
on
0 Posts
Re: May F/S Thread
motec m400 3500 obo but be reasonable
The ems has never been used. This package comes with a bunch of extras,a partially terminated wiring harness(some of the wiring has been used), boost solenoid,wideband 02 sensor,map sensor,kinsler iat sensor,motec usb to can adapter,serial cable,usb cable etc etc. Some of the items aren't in this picture,but I can take one for any serious buyers
The ems has never been used. This package comes with a bunch of extras,a partially terminated wiring harness(some of the wiring has been used), boost solenoid,wideband 02 sensor,map sensor,kinsler iat sensor,motec usb to can adapter,serial cable,usb cable etc etc. Some of the items aren't in this picture,but I can take one for any serious buyers
Last edited by cbustuner; 05-18-2011 at 11:03 AM.
#74
Honda-Tech Member
Join Date: Oct 2004
Location: lancaster, ca, usa
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Re: May F/S Thread
for sale is a circuitworx/prodrive stage 1 driveline set up.comes with hubs with new oe honda bearings,dc2 knuckles,intermediate shaft,both axles and spool with speedo drive gear and new ring gear bolts.the spool was installed in a trans but never used.the rest of the parts were never installed. $800.00 shipped
b18c distributor with custom made cover we used this on an old aem ems 1000 for coil on plug and worked great.it is used just for the sensors does not have ignitor or coil.
$60.00 shipped
momo compitition steering wheel with honda adapter kind of old but in ok shape.
$50.00 shipped
contact jon 818-974-4352 dezertracing@hotmail.com
b18c distributor with custom made cover we used this on an old aem ems 1000 for coil on plug and worked great.it is used just for the sensors does not have ignitor or coil.
$60.00 shipped
momo compitition steering wheel with honda adapter kind of old but in ok shape.
$50.00 shipped
contact jon 818-974-4352 dezertracing@hotmail.com
#75
Honda-Tech Member
Join Date: Jul 2007
Location: milton, pa, usa
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
Re: May F/S Thread
/For sale
new innovative 85a mounts. Billet with red Race bushings. these are as stiff as they come, a step down from solid. bought them new,installed them and my car has been sitting ever since. $290+shipping for EG/Bseries may work on other apps
Lightly Used bosch 044 fuel pump with -8an inlet/outlet fittings,Billet mounting bracket and wires. ready to drop in and go.$200 shipped 5000mi .. pump is dusty from sitting under plastic in my shop.
used DSS stg 2.9 EG/B axels bought them new about 2 years ago. they have had much more downtime than usage. these axels are the ****! one side i think PS axel has a lil surface rust starting to show on the center painted section."NO-BIGGIE" ... $440+shp
USED Aeromotive red fuel filter 10an inlet/outlet,paper filter. $65 shipped . looks fairly new
Lightly used set of skunk-2 pro-1 cams for Bseries. Made 550 @19psi in b18c $450 shipped comes in original boxes. 5000mi
New std cp wristpins from 84mm pistons. $35shipped
New 19tooth LS water pump with seals $35 shipped
Used p72 pistons and rods with oe bearings.low low miles in perfect cond. $90 shipped
gsr hydro trans case. Had some cracked webbing inside from failed diff.Allcleaned up.no leaks. In perfect working order $190+ shipping
Used JS dual stg boost controller. Has a hondata boost solenoid and hose with it. Best boost controller known to man.looks NEW. amazing gains.... No BS. $150 shpd
axels are on the car, cams are in the motor.these parts will not be removed until they are paid for.
if you have any questions just pm ..... or txt me (Dan) @ 57Zero-49Zero-89Zero8
new innovative 85a mounts. Billet with red Race bushings. these are as stiff as they come, a step down from solid. bought them new,installed them and my car has been sitting ever since. $290+shipping for EG/Bseries may work on other apps
Lightly Used bosch 044 fuel pump with -8an inlet/outlet fittings,Billet mounting bracket and wires. ready to drop in and go.$200 shipped 5000mi .. pump is dusty from sitting under plastic in my shop.
used DSS stg 2.9 EG/B axels bought them new about 2 years ago. they have had much more downtime than usage. these axels are the ****! one side i think PS axel has a lil surface rust starting to show on the center painted section."NO-BIGGIE" ... $440+shp
USED Aeromotive red fuel filter 10an inlet/outlet,paper filter. $65 shipped . looks fairly new
Lightly used set of skunk-2 pro-1 cams for Bseries. Made 550 @19psi in b18c $450 shipped comes in original boxes. 5000mi
New std cp wristpins from 84mm pistons. $35shipped
New 19tooth LS water pump with seals $35 shipped
Used p72 pistons and rods with oe bearings.low low miles in perfect cond. $90 shipped
gsr hydro trans case. Had some cracked webbing inside from failed diff.Allcleaned up.no leaks. In perfect working order $190+ shipping
Used JS dual stg boost controller. Has a hondata boost solenoid and hose with it. Best boost controller known to man.looks NEW. amazing gains.... No BS. $150 shpd
axels are on the car, cams are in the motor.these parts will not be removed until they are paid for.
if you have any questions just pm ..... or txt me (Dan) @ 57Zero-49Zero-89Zero8