Areomotive A1000 red fuel pump with inline filter and 3 new filter
asking 250 obo plus shipping & paypal fees


custom EF traction bar (4 point contact from LCA)
asking 300 plus
lca to front traction bar and lca to under chasis



Fast Brake willwood drag brake setup
never ran just mounted
asking 460 shipped plus fees


B series golden eagle cam gears
100 obo

 

For sale: K series turbo kit.

Turbo kit. Includes the following - manifold, dp, dump tube, s362 t4 .88, tial black 44mm, vibrant intercooler core 24x12x3.5" custom end tanks, hot side piping w/ tial bov - 2500.00

Afi intake manifold w/ hybrid racing 70mm. - 1000.00















Will ship at buyers expense. Text for fastest response.

8288505363

 

fast line shifter $120 used
B&M race shifter $100 used
Skunk 2 shift **** $50 used
CTR shift **** $50 used

MSD bilet distributor with blaster ss coil and driver. $400 used

summit racing fuel cell 5 gal. $100 used

ARP b series flywheel bolts new $50 new

taylor battery box $70 used

KSport coilovers $400 one shock the damper adjustment is stuck in the low position. used

autometer gauges in the pic $100 each for the speedo and RPM they were mounted but nver used. $70 for the fuel, and $30 for volt.

Innovative Motor motor mounts 85A... in the pics are solid mounts. used

intercooler end tanks. 4x12 $100 new

31x12x4 intercooler $170 new

sohc t3 manifold $50 used

CAI pipe best offer

open down pipe $100 used


DSS 2.9 axles $450 used

all price includes shipping unless outside the US.

 

Sfwd shell 95 eg hatch 10 point cage w/ window net and chute Ks tuned front brake kit Brake booster delete kit Skunk2 pro c coilovers Dss 5.9 hubs Full racecar wiring(switch panel,battery cut off) 4130 fab battery box Kirkey seats w/ covers Rci 5 point camlock harness Exospeed front end Skunk2 pro camber kit Nitro performance rear diffuser Ccc racing wing Asking 5500 obo If you want to get ahold of me faster just shoot me a text 2157962097

 

i have 2 bosch 044 pumps i have for sale. they have low miles (under 1000 miles). i decided to go with a fuel cell & a big single pump. i no longer need these. i made 786rwhp on these with no problem.



$130shipped / $125 picked up (Each)

or get both for 235shipped / 230 picked up

i bought these brand new from brfittings.com

 

T4 6766 precision made 535whp pump gas less than 2500 miles $900

AEM V1 OBD2a $400

96-00 gauge bezel boost n oil z-series autometers $100
AEM fuel rail with Fuellab FPR and oil gauge "WILLNOT PARTOUT" $200

3-4inch ramhorn downpipe $250

Eg/dc and Ek T-Brackets $50 each


Text me 203-556-5676 for faster response!!!!!!

 

Two Tial 44mm wastegates... One new one used
180 for used & 240 for new. Both come with 1 bar springs... Selling because now setup uses a 60mm gate. Will only trade for a 60mm gate. Buyer pays shipping and PayPal fees

 

Liberty Gsr 1-4 face plated
cryogenic gears with ring gear and 5th gear cuff. These are still at liberty and are no longer any good to me. Bill is 1327us from them plus shipping and I would like to get 300 for my shipping expense and oem second gear I bought Pm me if intrested or text 902 304 two 4 five 8

 

Located in So Cal. For faster response, TEXT ONLY to 562-229-2061

Avid 3 post Solid mounts for EG/DC. Brand New never installed. $325.00 shipped.



Skunk2 Pro Series Plus front camber kit for EG/DC. Brand New never installed. $175.00 shipped



Speedfactory GSR Intake manifold and Wilson Manifolds 90mm throttle body. 8 injector ready comes with SpeedFactory throttle cable adapter. Brand New never installed. $750.00 shipped.

 

tons of parts for sale yes I will ship anywhere buyer pays shipping and pay pal fees TEXT ME OR CALL ME (516)403-7564 TEXT FORPICS

ID 2200 INJECTORS $600 WITH HATS AND CLIPS
BORG WARNER S72 TURBO WITH UP PIPE$650


KSPORTS EG/DC SUSPENSION 500 MILES ON THEM $475

KSERIES INTAKE MANIFOLD WITH4FOGGER INSTALLED COMES WITH BOTTLE AND ALL $500


13X10 WELDS RIMS AND SLICKS $950


H22 GOLDEN EAGLE MANIFOLD WITH 70MM THRTTLE BODY $500


COMPETITION BSERIES TWIN DISK MINT HAS 3 DYNO PULLS $800


AEM EPM WIRING KSERIES COILS $350


GT4202 1.15BACK HOUSING $900


SUMP TANK WITH LINES AND A1000 PUMP $250


2 INTERCOOLERS SMALL ONE $50 BIG ONE $100

 

For sale: 32 long 5inch thick 12 inch high afi intercooler
(352)840-3087 need gone

$$$$$ 450 $$$$$$ you pay shipping.
text me for more pictures, this site isn't allowing me to upload more.

 

Bought both clutch and flywheel BRAND NEW.

Made ONLY 3 passes.

$500 FIRM FOR BOTH

Shipping not included

If interested text me for fastest response
404-558-6234 Luis

Exedy 3 puck clutch. Thick Disk *6speed Trans*
Competition Ultra Lightweight Flywheel

 

Laskey built gsr

84mm benson sleeved block

Pauter rods

Cp 10:3 pistons

Ati dampener

Moroso oil pan

B16 head built by headgames

Gsr cams

Golden eagle cam gears

Supertech valve springs and retainers

Supertech black nitride intake valves

Supertech steel exhaust valves

Arp headstuds

Golden eagle headgasket

Will come with valve cover,catchcan/overflow,fillerneck and catch can lines


$4200 obo

Turbo kit for sale

Speedfactory t3 top mount w/ 44mm gate flange

Tial 44mm wastegate

Precision 6766 t3 .82 a/r

Afi dual backdoor intercooler

Dumptube and uppipe

Upper intercooler pipe w/ tial flange

Everything uses vibrant vanjens which will be included

$2600 obo shipped

 

Can best reach me at 1 (573) 5 7 9 -0 five 1 five
NEED THIS STUFF GONE MAKE ME A OFFER

For sell
Brand new never mounted billet 6768bb with .96 AR asking $1800 OBO+PP &shipping




New b series 84mm arias pistons $400 shipped





Good used ek b series DSS 5.9 axles w/ hubs. $1000

 

Contact Justin 2034102574 or shoot me a PM

GSC Power Division Standard size B18c/b16 intake and exhaust valves. These valves have about 30 passes on them and are in good shape. Looking to get 200 shipped and paypal fees included.

Supertech 85lb springs, titanium retainers, 7 degree locks for b18c/b16. These have about 30 passes on them and are in good shape. Looking to get 300 shipped and paypal fees included.

Both items will be available for shipping middle of this week when the head arrives at ARFab and Brandi Anderson does some dis-assembly. Pics will also be available tomorrow or thursday.

 

Spooling performance t4 ram horn for h22 $500 shipped will include downpipe and dump tube free
Precision turbo 6176s $400 shipped
Precision turbo 750 fmic $250 shipped
3" downpipe $75 or free with manifold
Dumptube $45 or free with manifold
Bov and fmic pipes sold
229-416-7503
$1050 shipped for all that's left.

 

I am wanting to sell my 1992 turbo Honda Civic drag car with a brand new spare sleeved longblock motor. Car made 700HP+ on Ethanol and previous owner ran a 10.0@145+ with this setup with 24.5's Will not come with slicks and will not come with custom long horn diffuser

Asking 20k OR BEST OFFER

I maybe willing to trade plus cash on your end only looking for this

Blue or black EM1 Civic SI *(has to be stock and has to have working a/c has to be able to pass emissions legally)* Plus cash on your end

4x4 truck with a V-8 *(has to have working a/c and has to legally pass emissions)* Plus cash on your end

***I AM NOT GOING TO PART OUT THE CAR SO DON'T ASK***
***I AM NOT GOING TO PART OUT THE CAR SO DON'T ASK***
***I AM NOT GOING TO PART OUT THE CAR SO DON'T ASK***

*Motor*
Built ls-vtec stock sleeves with wiseco pistons upgraded wrist pins, eagle rods with big bolts, head and main studs, type-r head, supertech valvetrain with flat face valves, type-r cams, head is o-ringed, Magnus intake manifold, ID2000's running on Ethanol

*Turbo*

Borg warner 366 turbo
Full-race exhaust manifold
dual 38mm Tial mvs waste gates
Tial blowoff valve
Custom intercooler with end tanks

*Trans*
LS trans with quaifie diff, liberty handcuff, speed factory modified SCHA, clutch masters twin disk,
DSS 5.9's

*Car*
Full 10 point roll cage, Kirkey aluminum seat, Weldon fuel pump, FCS 5 gallon sumped tank, Hondata S300v2 W/BBG, Blox drag suspension, skunk 2 rear lower control arms and front upper control arms, Ken's Kustom parachute mount with stroud parachute

*Brand new spare motor*

ERL Race sleeved 84mm block
JE pistons PN- 302410
JE Rings PN- JG1004-3307
Manley TurboTuff rods PN-14412-4
ACL Rod bearings
ACL Main bearings
ACL thrust bearings

Type-r Head
Full Ferrea Kit, valves, retainers, valve seals, valve guides, springs. (Brand new0
Type-r cams
Golden eagle ls-vtec kit and 84mm head gasket (Brand new)
ARP head studs (Brand new)
OEM type-r oil pump (Brand new)
oem Type-r water pump (Brand new)
AEM Fuel rail (used)
Skunk2 cam gears (Used)
stock oil pan (used)
wrinkle coated valvecover (Used)
NGK spark plug wires (Brand new)

Only thing missing to make this a full shortblock are injectors, distributor, and all the sensors


***I AM NOT GOING TO PART OUT THE CAR SO DON'T ASK***
***I AM NOT GOING TO PART OUT THE CAR SO DON'T ASK***
***I AM NOT GOING TO PART OUT THE CAR SO DON'T ASK***
***I AM NOT GOING TO PART OUT THE CAR SO DON'T ASK***
***I AM NOT GOING TO PART OUT THE CAR SO DON'T ASK***
***I AM NOT GOING TO PART OUT THE CAR SO DON'T ASK***

 

competition flywheel - resurfaced and only used for a week because I found a deal on a twin disc. $100



4 puck clutch disc - used for a week and then found a deal on a twin disc. my loss is your gain $40



Wiseco 11.5:1 c/r 84.5mm - bought them used with that same screw indentation and had them running in my car for a year before I decided to go higher compression. made 231hp with these bad boys. $120



h22a distributor obd1 $40


Top half of intake manifold ported $40



Intake manifold spacer aka butterfly delete $30


h22a Bare head packaged was ready to ship but buyer flaked on me. if you are interested ill rip it open to show you the great condition its in $20


5163306190

located in inwood ny 11096

 

I am selling my BMC Race intake manifold and 90mm Accufab throttle body. I purchased it from Armondo at ILL Garage. there is absolulty nothing wrong with it just going a different route with my car. It made close to 1000hp on ILL Garages race car and many others who have used BMC know they are proven.

will include fuel rail, and custom bolt on adaptor plate for 72mm or 70mm throttle bodies incase you rather not use the 90mm

im asking $700 plus shipping and paypal fees, im located in Chicago

 

I have 2 b series aem fuel rails one is in great condition silver without fittings $75 the other one still works fine was just shaved a little i want $40 for that one the 2 bolt on regulators $75 each the universal one $85 all prices are firm plus shipping and paypal fees.



Brand new hondata manifold gasket for gsr just no package pic was prior to me tossing the package $30 shipped in us




used hondata manifold gasket for gsr 20 shipped in us


tial 38mm 2 bolt wastegate unsure of what spring it has $100 firm



Intercooler and piping came off my daily dc made 614 whp with this setup no leaks and some clamps are missing i will take measurements if interested has a hks black bov $250 plus shipping and paypal will not seperate kit.



autometer phantom nitrous and water temp gauge i cant find sensor for gauge what you see is what you get $35 for nitrous $20 for water gauge pod $15




type r steering wheel will fit eg and dc and ef $150 firm thew velcro works just takes some finesse




3 alternators all work great just had them tested $35 each




duralast gold battery $75



nrg short hub for ek and quick release i have a momo steering wheel as well that was installed for 2 days i cant find the horn but i have the plate that holds the horn button $225 firm i prefer not to separate but will for the right price






JAZ 1 quart fuel cell with built in mounting studs -8 on bottom -6 on side $50



brand new slave cylinder never used not oem $10



D16Y8 Intake manifold what you see is what you get $40

ARP D16Z6 Head Studs Brand new I opened them, and put them on the block hand tight and realized they were for a z6 and not a y8



2000 Civic SI OEM Headlights just need to be cleaned $150



Interstate battery $40



-8 fuel feed line with 1 90 and 1 45 fitting on it 87 inches long $125



NRG Traction bar eg dc $150

 

Insane Driveshafts 1000HP for Honda Civic/Integra 90-93
Part number: -IS006-D - IS-007-D

$690 + Shipping
Only 6 passes

 

I'm selling my H22 custom ramhorn turbo kit. It has made over 800whp on the last engine it was on. Comes with T4 ramhorn manifold, Tial 38mm wastegate, wastegate dump tube, and 4" v-band downpipe. The kit was intended for use on the Honda EG/EK/DC platforms. All parts of this kit are high grade stainless steel material. This kit is meant to be used with the Borg Warner s366 but I'm sure it can be adapted to another turbo. Looking to get $1200 will include free overnight shipping.

 

F/S: brand new Bosch 044 $150.
631-466-6275 text or pm

 

BNIB Dedenbear CO2 kit and extras

10oz bottle
On/off valve
Regulator with high/low pressure with gauges
1/4"10 foot line
Quick connect fittings
Bottle brackets
Mac boost controler
CGA 320 to 1/8" to pin valve "so any paint ball place can refill it"

$250 plus shipping and PayPal
Call/text/pm
6127O32OO1

 

tpr cam seals new 25 shipped for one.
b16 thermal gasket 25 shipped.
b series golden eagle fuel rail 115 shipped.
all prices do not include paypal.
thank you.