AEM EMS 30-1070U
Designed for K-swapped cars. This unit was plugged in for start up but was never ran in the car. Wideband was never used. Everything is still in the box ready to be shipped out.

$850 Shipped










Next is almost everything to put together an all motor B-series shortblock. I will sell it all for $2200
Golden Eagle Sleeved B18a1 Block. Bored and honed to 86.5mm $1000


Brand New Custom CP 86.5mm 12.5:1 B series pistons. They have been prepped so all the sharp edges are removed $650


Crower Maxi-lite rods, LS rod length. Used but less than 100 miles on them $500

LS Crank. $100


Moroso Steel B-Series Oil Pan 5.5qt. It is tapped and plugged for turbo drain line and oil temp sensors. $300

 

Volk TE37 bronze drag pack, 13" fronts on 24.5s, 16" rears
NRG Miller (B.C.) 'magic stix' '505' lift cams

 

1994 SFWD CIVIC HATCH FOR SALE ( ROLLING CHASSIS)

Fresh 1994 si blue paint inside and out
exospeed 3 piece front end
OMNIPOWER full body drag coilover set
custom hymes joint lower control arms
8 point chromoly cage with parachute mount
full interior with carpet.
clean title
WELD RACING 15x10 drag wheels and skinnes fresh slicks

$4000.00 with wheels or $3500.00 without wheels.. CAR HAS BEEN SOLD WITH THE WELD WHEELS!!

 

B series scattershield

http://toronto.kijiji.ca/c-cars-vehi...AdIdZ295017025

 

Supertech h22 valves
Intake 36mm ex oem size
150.00
H22 valve springs
150.00
Pm me for pics

 

GSR eagle rods 200 shipped

 

FS: b series bisimoto Custom header

Minor scraps on the bottom, nothing that effects performance. Great condition - 500.00 + shipping.

 

FOR SALE... veilside carbon fiber racing seats, fully reclinable, near perfect condition, really nice seats, msrp over $3000, with rails, $900 or trade for slicks and skinnies

call or text for anymore info of pictures 7065877278

 

Precision Billet BB GT4272 with 1.28ar exhaust housing, $2200 plus shipping

 

Ported and built k series head from a type s!









$1300 Shipped

 

I have a used NOS plate system for sale, This kit we used on a stock B20/Gsr head, we made 239hp and 230 TQ on Ron's dyno. Believe those are very close numbers, it's been awhile. Looking for 250 or offer for whole kit. Retails for like 600 bucks. Includes all hardware, plate and 10lb bottle.

NOS part number 02040nos

same kit
http://www.amazon.com/NOS-02040NOS-C.../dp/B000LWIXH4

help of installation available. This kit will only work for 94+ GSR's only. Nothing else.

 

GSR Hydro Trans With Quaife LSD, MFactory 3.07 First gear and 4.2 Final Drive. Same exact combination i used to run the quickest stock tranny pass(9.27) on 24.5's. Perfect stock trans gearing combo for high hp spfwd car. Trans was just refreshened and has zero passes on it . Prefer Local Pick Up $1500

GSR Shift Linkage with Energy Suspension Bushings -$150

Precision Turbo Billet 6768 Ball Bearing. .96 exhaust housing Anti-Surge H Cover (4in\3out)
Has 15 Passes and Some dyno time. Perfect shape- $1900

3.5 Inch Aluminum Exhaust for EK Hatch(may fit other chassis). Comes with vibrant race muffler v bands on both ends. Great ground clearance and fits perfect.-$600 prefer local pick up. Will Work Deal For Exhaust\DP combo

All Prices Do Not Include Shipping or Paypal\No Reasonable Offer Refused
Juice2435@aol.com

 

XS Engineering Power IC Core - GTR with Endtanks
Slightlly used, still in very good condition
Price: $400 plus shipping
24" x 11" x 3" including end tanks


NOT ACTUAL PICTURE

 

95 Si Drag Shell For Sale
$800 takes it!!


1pc fiberglass frontend (small crack)
fiberglass doors
1pc rear end suspention
ROLL CAGE . (no cert sticker on it, don't know if it was in the past)
still have the old plexiglass windows. They are foggy and be better used as templates to make new ones.

WILL NOT SELL JUST THE DOORS or FRONT END. Take it all.
located in Yakima,WA area (zillah,wa 98953)

More pics in link in sig.

$800

 

I have decided to go a different route with my car, so looks like I need to clean out the closet.

Brand New TiAL Stainless Steel V-Band GT35 Housing 1.03 A/R - $400 OBO


Used Edelbrock 70mm Throttle Body - $300 OBO




Brand New Garrett 60-1 turbo - $700 OBO




Slightly Used Accel 1200CC Fuel Injectors - $300 OBO


ERL SLEEVED GSR ENGINE - $3500

This motor has approx. 2000miles .

Engine specs are as follows:

ERL Sleeved B18C Block
84MM Bore
Wiseco Pistons
Eagle Rods
Balanced GSR Crankshaft
ARP Main Studs
ARP Head Studs
ACL Race Main and Rod Bearings coated by Calico Coatings
Cometic Head Gasket
Ported GSR Head
GSR Camshafts
Supertech Std Size Valves
Supertech Valve Springs and Titainum Retainers
Approx Compression ratio of 9.2:1

Intake Manifold, Fuel Injectors, and Fuel Rail are NOT included, but can be purchased separately. Motor will be a bare long block. Will not come with any sensors or distributor.

 

WILL TRADE FOR ROLLERS/DAILY DRIVERS ETC.

Still have my chassis thanks to a flaker, slacked on getting it back up here. I am offering a package deal with my electronics/random parts if you're interested in something along those lines as well.

Someone please do this chassis some justice

What you see is what I have, anything else pictured that isn't listed is likely gone.

Thanks!


List of parts:

Chassis: $12,000

• 25.5 spec (not yet cert’d, built by NRG to pass cert) 1992 Honda Civic Si
• Strange Rear shock/hub/brake combo. 90lb springs. Double adjustable.
• JAZ 3 gallon fuel cell
• Charge pipe with 2 downstream injector ports
• Kirkey pro-drag seat (mounted to fit into car)
• Franks fiberglass front end
• Franks fiberglass doors/rear hatch
• Carbon fiber sunroof plug – not installed since fabrication is not complete
• Weld Magnum skinnies w/22” MH tires

Electronics:

• AEM Serial - Custom fuel pressure gauge to read higher pressure (above 200 psi) – 250 (Also reads 5 other channels all in one unit)
• 2- AEM Water/Oil temp gauge – 175
• AEM UEGO sensor (external) (Reads low enough for methanol) – 160
• ARC electronics Switch panel w/firewall mounted panel - 300
• 128 pin cannon plug w/1 backshell and pins - 250

Universal Parts:

• Weld Magnum fronts 15 x 10. 4” backspace, 5 x 4 ¾ bolt pattern. (Chevy) Used 28 x 10.5” tires on them
• XS power 16v battery – 225 (may be surcharge for shipping due to weight)
• Safecraft Fire suppression system
• 2 550lb springs and 2 450lb springs. 2.5x8” – 100 a set shipped
• -8 Earls Black fittings – Lots of misc plus hose
• Kinsler K-140 Fuel Pressure Regulator - 350
• Kinsler monster mesh fuel filter -12 in/out - 125

I also have push lock fittings from Legris and about 20' of 1/4 line as well. Black line, fire jacket, and black/nickel plated fittings. You can sort of see the stuff in the last picture near the WG's and chassis. Not sure on a price but I'll take inventory and post up.


HOSE/FITTING Inventory:

-8:

Straight - 2
45* - 2
60* - 2
90* - 4
120* - 2

Hose - 10 feet (I think I've used 3 feet of this tops)

-10:

Straight - 2
45* - 1
90* - 1

-12:

Straight - 2
45* - 1
90* - 2
120* 1

Reducers 10 --> 8 (Qty. 2)

I think there is a misc -6 90*, straight, and maybe 3 feet of new line as well.

Also should have a few feet of -12 left as well.

40' Trailer - 8k with 5th wheel hitch

 

s2000 quaife rear diff





^recently taken apart and re-greased and re-torqued. perfect working condition.
$500 obo

thats right complete built b16 head.

Crower Dual Valve Springs
Crower Ti Retainers
Crower Keepers
Omni Power one piece Valves black nitrided

head has nothing wrong with it. complete with rockers and all cam caps

NO VALVE COVER, NO DIZZY, NO VTEC SOLENOID

asking $500 with the head complete
$600 with the stock intake manifold bare.






the deck is straight. can have it professionally cut to spec for an extra $100 (my cost)
located in long island.
head will be hot tanked prior to sale

 

FS

B series 81.5mm wiseco pistons (9.7:1 compression, part number K542M815) on B series eagle rods (gsr length) with 3/8" bolts, have about 10k miles on them.

looking for $450 for the pair

GSR crank in good condition- $100

call/text me at 3017301003

 

Brand new in the box B-series coated Wiseco pistons.

12.5 - 13.1 Compression depending on head
81.5 mm bore
$395

 

bnib b16 magnus intake manifold 500 shipped

bnib kseries act 12lbs flywheel 200 shipped

 

Half size EG/integra( will fit EF with modification) PWR radiator. Was pressure tested before install and just took it off my car since I went back to stock. It looks rough but does not leak one bit, I am asking $120 OBO (fan not included). You can call/txt me at 623-217-8966 and ask for juan or pm me.

 

T4 open Top Mount manifold for Bseries - $700
3" Down Pipe - $100
T4 divided (knife edged) XS Engineering T04x Turbo - $700
link:http://www.xs-engineering.com/xsstor...idproduct=4817


Package deal - $1500 for everything

I made 518whp at 18.5psi.







ALSO SELLING
15" Bogart pro4 fronts w/ 26x10.5" MH- $600





rebuilt ITR trand with mfactory 4.05 Final drive- $900OBO
** Pics coming soon trans is at shop.

 

new for sale,BW 366xl with inconel turbine wheel upgrade,install for fitment never soo boost.900 obo shipped

 

92 CIVIC CX SFWD CHASSIS FOR SALE:
contact 646 739 9291
email franchise2986@aol.com

::


= chassis include exospeed 3pc front,10pt rollcage with chute mount nrgtech installed cage window net 5point seat belt harness
=battery cutoff.. brake line tuck..wire tuck..
=new paint job 4/11 charcoal greyy
=nrg steering wheel..skunk2 camber kit front and rear..k tuned traction bar rear diffuser
= buddy club spec racing full coilver suspension.............asking 5,000 clean title

motor includes:
golden eagle hd sleeves..84.5mm cp 9.7 piston p2w.5-.6
pauter rods acl race bearings
ati race dampner...victorx intake manifold arp headstuds
powder coatedvalve cover
b16 head ported supertech valvetrain all new revised ecconnel valves
brian crower 402a cams..............can sell complete or short block or head
.......asking 4800 motor still in car running everything car was trapping 153@ 28lbs 6765 billet @ max boost 36-38lbs it made 865 @571lbs.......











transmission
mfactory pro series syncro set 1-4
m factory pro final drive 4.05 ls/b16
obx diff carbon coated syncros new 1-2 sleeve literally only 2 passes will post pics as requested every thing 3400 1-4 is 3000 alone

comp twin disc SOLLD
m&w pro 10 w crane coil t1 harness$600
g force long shifter SOOLLD
simspon chute never pulled $300
dss 5.9 with spindles $1400
spoon replica with 235/60/15 used only on dyno back tires 205/50/15 kuhmo $450pending
precision 6765 t4 billet hp housing mintt SOLLD
12x24X4.5 COOLER 250 HAD REPAIRS PRESSURE TESTED AT 30PSI
3in alum piping wtial bov 200
s300 w boost option $500pending
hondata pwm$50pending
precison 1600 w fjo driver 400
A1000 with 100micron filter and regulator sump tank all lines$550
bogarts 13x8 with24.5x9x13 with 1/2 spacers and lugs $450
precision 44mm gate$solddd
xs battery s680 month old $80
inline pro stainless t4 manifold 60mm gate SOLLD
84.5mm arais pistons 9.1 brand new includes
rings wrist pins missing locks askin 350 SHIPPED
15lb nitrous bottle 80 bucks
b16 stock head back up head never been milled complete 350
powder coated valve cover nrgtech catch can 300
t4 custom top mount 44mm gate i had an s372 on it at 1 point$ soldd
3 in stainless v banded down pipe w flex pipe soldd

 

Weld Centers Freshly powder coated black. 250 obo


GSR Cams/gears and new cam seals 100 obo

AFI Aluminum 2.5 intake charge pipe 50. obo