Jan FS Thread
Honda-Tech Member
Joined: Sep 2008
Posts: 380
Likes: 0
From: MD
Re: Jan FS Thread
91 HF CRX rust free caged roller
-10 pt tig welded cage with full interior, good for 8.50s
-Sumped fuel tank
-Vibrant 875hp intercooler with custom 3in piping
-Dent free fenders
-Comes with all electrical harnesses
-Parachute cable installed along with removable parachute mount and door swing outs
-Car comes with every body panel, head lights, tail lights, interior, etc to be a complete street or track car. The front bumper that is on there now is a Urethane Mugen bumper to cover such a large intercooler and is set up for quick release via zeus fasteners. Any of this could easily be switched out for a 3pc front end or stock bumper if desired. This car would be a simple chassis to finish for the upcoming season. $2000 Firm CASH. PM me with any questions!
-10 pt tig welded cage with full interior, good for 8.50s
-Sumped fuel tank
-Vibrant 875hp intercooler with custom 3in piping
-Dent free fenders
-Comes with all electrical harnesses
-Parachute cable installed along with removable parachute mount and door swing outs
-Car comes with every body panel, head lights, tail lights, interior, etc to be a complete street or track car. The front bumper that is on there now is a Urethane Mugen bumper to cover such a large intercooler and is set up for quick release via zeus fasteners. Any of this could easily be switched out for a 3pc front end or stock bumper if desired. This car would be a simple chassis to finish for the upcoming season. $2000 Firm CASH. PM me with any questions!
Honda-Tech Member
Joined: Sep 2004
Posts: 144
Likes: 0
From: NEW YORK
Re: Jan FS Thread
Bare shell for sale has brand new paint job, Nhra 8.50 certified cage, fiberglass doors, fiberglass one piece front end, lexan windows all around, CCC drag wing, has stock front suspension and no rear suspension $3000 OBO takes it. Give me a call if interested 917-847-7476.
Last edited by jeff 16; Jan 13, 2014 at 04:04 AM.
Honda-Tech Member
Joined: Mar 2011
Posts: 211
Likes: 1
Re: Jan FS Thread
I have cp 9.1 cr 84mm for b18 or b20 for sale asking 475 shipped. You can email me at dfurka50@yahoo.com for pictures or questions .
[/IMG]
[/IMG]
Re: Jan FS Thread
Complete Dual Bosch 044 setup basically new never ran on just started up to make sure no leaks...ended up parting the car out what you see is what you get - 800 shipped
Honda-Tech Member
Joined: Dec 2009
Posts: 218
Likes: 0
Re: Jan FS Thread
SELLING MY SHELL $4000
AND ANY PARTS ANYONE NEEDS OFF IT FROM COILOVERS TO FALL PLEXI WINDOWS
5 Gallon nitro fuel cell never had fuel in it brand new $300
kens kustom axle with aerospace brakes weld wheels $2500
f2 DRAG COIL OVERS $500
momo wheel with nrg quick Release $260
SKUNK2 PRO UPPER CONTROL ARMS FOR EG $200
skunk2 pro cam gears $100
XENOCRON CAM DEG KIT FOR B $200 -----sold----
10lb nos tank brand new make offer
p28 ecu i can make u base map or sell it with no chip $150
p72 chiped ecu $150
auto meter phantom gauges water boost fuel text for price
port flow GSR HEad with comp pluse valves skunk2 pro springs retainers $1000
in line pro intake for gsr (like golden eagle) WITH FUEL RAIL $600
ELECTRIC WATER PUMP WITH 22T IDEL $350
,MOI
(856) 332 5450
AND ANY PARTS ANYONE NEEDS OFF IT FROM COILOVERS TO FALL PLEXI WINDOWS
5 Gallon nitro fuel cell never had fuel in it brand new $300
kens kustom axle with aerospace brakes weld wheels $2500
f2 DRAG COIL OVERS $500
momo wheel with nrg quick Release $260
SKUNK2 PRO UPPER CONTROL ARMS FOR EG $200
skunk2 pro cam gears $100
XENOCRON CAM DEG KIT FOR B $200 -----sold----
10lb nos tank brand new make offer
p28 ecu i can make u base map or sell it with no chip $150
p72 chiped ecu $150
auto meter phantom gauges water boost fuel text for price
port flow GSR HEad with comp pluse valves skunk2 pro springs retainers $1000
in line pro intake for gsr (like golden eagle) WITH FUEL RAIL $600
ELECTRIC WATER PUMP WITH 22T IDEL $350
,MOI
(856) 332 5450
Last edited by MoiMotorsports; Jan 30, 2014 at 06:35 PM.
Re: Jan FS Thread
phantom grip 5th gear delete/brace (used)
asking 175 shipped
Areomotive A1000 red fuel pump with inline filter and 3 new filter
asking 250 obo plus shipping & paypal fees
6L B series gsr BMC intake manifold
Will come with accufab 70mm throttle body
Asking 600 + shipping & paypal fees
MSD digital 6plus asking 200+shipping and fees
Bogart Pro4 front (13x8)and rear skinnies(15x4.5)
fronts are 24.5x13x8.7
rear are 24x4.5x15
asking 1200 local pick up only (will ship at buyers cost)
asking 175 shipped
Areomotive A1000 red fuel pump with inline filter and 3 new filter
asking 250 obo plus shipping & paypal fees
6L B series gsr BMC intake manifold
Will come with accufab 70mm throttle body
Asking 600 + shipping & paypal fees
MSD digital 6plus asking 200+shipping and fees
Bogart Pro4 front (13x8)and rear skinnies(15x4.5)
fronts are 24.5x13x8.7
rear are 24x4.5x15
asking 1200 local pick up only (will ship at buyers cost)
Last edited by 209lsr_ly; Jan 27, 2014 at 06:13 PM.
Re: Jan FS Thread
B18A1 Golden Eagle Sleeved Block. Currently at 84mm, needs to be bored to 84.5mm. Great shape, just had as a back up. $1000 OBO plus shipping and paypal fees.
GSR Trans with Mfactory lsd. Shifts perfect. $1000 OBO plus shipping and paypal fees.
Blueridge 44mm Dumptube. $40
Autopower adjustable seat brace for 1 3/4" bar. $100
Innovative Mounts for Ek 62A Rubber. $200
GSR Cams. $50
GSR Trans with Mfactory lsd. Shifts perfect. $1000 OBO plus shipping and paypal fees.
Blueridge 44mm Dumptube. $40
Autopower adjustable seat brace for 1 3/4" bar. $100
Innovative Mounts for Ek 62A Rubber. $200
GSR Cams. $50
Honda-Tech Member
Joined: Nov 2002
Posts: 2,303
Likes: 0
From: "It's Miley" Pittsburgh, PA
Re: Jan FS Thread
K24 side motor plate $65 shipped
Comp twin plate great shape in nitrous car $840 shipped
Thanks text cell 4128183007 or shoot me pm
Comp twin plate great shape in nitrous car $840 shipped
Thanks text cell 4128183007 or shoot me pm
Last edited by fmfkid250; Jan 11, 2014 at 12:05 PM.
Honda-Tech Member
Joined: Nov 2011
Posts: 22
Likes: 0
From: Nova Scotia, Canada
Re: Jan FS Thread
New in box Manley Turbo Tuff Rods, GSR Fitment.
Part number: 14414-4
Bought these new in the early spring from a local dealer, I am wanting to switch to an LS crank and rod. Only came out of the box for the pictures.
Price is $750obo Buyer pays shipping and PayPal.
PM or text 902 three0five 50two9
Part number: 14414-4
Bought these new in the early spring from a local dealer, I am wanting to switch to an LS crank and rod. Only came out of the box for the pictures.
Price is $750obo Buyer pays shipping and PayPal.
PM or text 902 three0five 50two9
Honda-Tech Member
Joined: Sep 2009
Posts: 205
Likes: 1
From: Orlando, Fl
** P72 GSR Head + ARP Studs & GE Conversion Kit ***
Hello. Please check out my ad in the for sale thread...
Click here for a link to the ad with pictures. Thank you!
For sale, P72 GSR head comes with everything pictured : $450
(One of the OBD1 Dizzy harness connectors is cracked but still works, we laid the head on it by mistake when we stored the head
)
Also, a brand new Golden Eagle VTEC conversion kit: $50
Brand new ARP P72 Head Stud Kit: $50
Will sell everything together for $500.00
Buyer pays shipping.
PayPal Accepted.
DM me for more pictures or additional information.
Thanks guys!
(One of the OBD1 Dizzy harness connectors is cracked but still works, we laid the head on it by mistake when we stored the head
)Also, a brand new Golden Eagle VTEC conversion kit: $50
Brand new ARP P72 Head Stud Kit: $50
Will sell everything together for $500.00
Buyer pays shipping.
PayPal Accepted.
DM me for more pictures or additional information.
Thanks guys!
Honda-Tech Member
Joined: Apr 2004
Posts: 601
Likes: 0
From: Oxford, PA, US
Re: Jan FS Thread
Have two F1Spec cloth covered fiberglass buckets, *really* light but I need slightly wider seats. Non FIA.
Seat link: http://store.f1spec.com/
I have two of them, some small scratches on the fiberglass coating on the backs from storage but otherwise new. 15" wide hip area, snug on me at 190lb, good for someone at 175lb or under with around a 32-34" waist.
$150/ea for the seats themselves. $50/ea for the sidemount to bottom mount adapters (Kaplhenke Racing)
OR $350 for everything.
PM or email kandpperformance at gmail dot com
Seat link: http://store.f1spec.com/
I have two of them, some small scratches on the fiberglass coating on the backs from storage but otherwise new. 15" wide hip area, snug on me at 190lb, good for someone at 175lb or under with around a 32-34" waist.
$150/ea for the seats themselves. $50/ea for the sidemount to bottom mount adapters (Kaplhenke Racing)
OR $350 for everything.
PM or email kandpperformance at gmail dot com
Honda-Tech Member
Joined: May 2009
Posts: 45
Likes: 0
Re: Jan FS Thread
Going a different direction with the build so need to sell some stuff.
For faster response text 757-818-2917
****ALL PRICES INCLUDE SHIPPING AND PAYPAL FEES****
Hondata CPR used will come with original box-300
Tial Q 50mm BOV used in perfect condition-160
Garrett intercooler core 27.8x12.7x5.1 1260 hp rated BNIB-550 ***NOT INCLUDING SHIPPING DUE TO WEIGHT***
For faster response text 757-818-2917
****ALL PRICES INCLUDE SHIPPING AND PAYPAL FEES****
Hondata CPR used will come with original box-300
Tial Q 50mm BOV used in perfect condition-160
Garrett intercooler core 27.8x12.7x5.1 1260 hp rated BNIB-550 ***NOT INCLUDING SHIPPING DUE TO WEIGHT***
Honda-Tech Member
Joined: Aug 2012
Posts: 239
Likes: 0
From: south jersey
Full blown dual hanger with 2 fullblown 340lph pumps with a -8 feed and a -6 return never wired and fuel never ran through it only installed - $350 shipped
Aeromotive a1000 fuel pressure regulator $100 shipped
Oem 92-95 fuel tank $50 picked up!
Blackworks brake boost delete kit brand new only opened for pictures $125 shipped!
Blox lcas for 96-00 ek brand new only opened for pics $100 shipped!
Aeromotive a1000 fuel pressure regulator $100 shipped
Oem 92-95 fuel tank $50 picked up!
Blackworks brake boost delete kit brand new only opened for pictures $125 shipped!
Blox lcas for 96-00 ek brand new only opened for pics $100 shipped!
Honda-Tech Member
Joined: Nov 2005
Posts: 358
Likes: 0
From: Toronto, On, Canada
Re: Jan FS Thread
AEM Coil On Plug Kit
All of stuff is pretty much brand new installed on the car and started but the car never made it to the dyno.
AEM Twin Fire Ignition Module 30-2821 List $421.11
AEM EPM 30-3255 List $332.50
AEM CDI Pencil Coils 30-2851-4PK List $275.91
$600 for everything shipped
All of stuff is pretty much brand new installed on the car and started but the car never made it to the dyno.
AEM Twin Fire Ignition Module 30-2821 List $421.11
AEM EPM 30-3255 List $332.50
AEM CDI Pencil Coils 30-2851-4PK List $275.91
$600 for everything shipped
Re: Jan FS Thread
RACE MOTOR
Made 750 and tuned by Shawn Ramey
Engine Block - Have most of paper work Shawn Ramey built and will vouch for $3000 for Shortblock no ati pulley $3300 with crank pulley $4500 for Longblock with everything
- 84.5 mm AEBS sleeves
-O- ringed
- turbo tuff rods
- 10:1 Weisco pistons
-golden eagle studs
- Golden eagle head gasket
- upgraded wrist pins
Golden eagle oil block offs
Complete GSR Head $
Gsr dizzy with MSD blaster ss coil setup
Gsr head which includes all of the following Fresh rebuild less than 200 miles on entire set up :
Ported and polished
Pro 1 cams
Skunk 2 valves spring and retainers
Contact 804-536-3879
Located in Richmond VA
Made 750 and tuned by Shawn Ramey
Engine Block - Have most of paper work Shawn Ramey built and will vouch for $3000 for Shortblock no ati pulley $3300 with crank pulley $4500 for Longblock with everything
- 84.5 mm AEBS sleeves
-O- ringed
- turbo tuff rods
- 10:1 Weisco pistons
-golden eagle studs
- Golden eagle head gasket
- upgraded wrist pins
Golden eagle oil block offs
Complete GSR Head $
Gsr dizzy with MSD blaster ss coil setup
Gsr head which includes all of the following Fresh rebuild less than 200 miles on entire set up :
Ported and polished
Pro 1 cams
Skunk 2 valves spring and retainers
Contact 804-536-3879
Located in Richmond VA
Last edited by ricin4ever; Jan 14, 2014 at 09:49 AM.
Re: Jan FS Thread
]I have a 6766 t4 096 a/r brand new never used bolted to the manifold
Decided to go with a 6267 to meet class rules
Thanks for looking!
Pm if u have any ?
Asking 1150
[URL=http://s237.photobucket.com/user/civichbc/media/3BFD11A1-731E-4D38-84E5-B7DF3933AC9C-3371-00000107B701FED0_zpsfecb215e.jpg.html]
Decided to go with a 6267 to meet class rules
Thanks for looking!
Pm if u have any ?
Asking 1150
[URL=http://s237.photobucket.com/user/civichbc/media/3BFD11A1-731E-4D38-84E5-B7DF3933AC9C-3371-00000107B701FED0_zpsfecb215e.jpg.html]
Last edited by jdm inc; Jan 15, 2014 at 06:09 PM.
Honda-Tech Member
Joined: Apr 2001
Posts: 1,974
Likes: 0
From: elizabeth, nj, usa
Re: Jan FS Thread
FOR SALE
JG 8 injector GSR manifold with lower rail and powder coated black- $350
SKUNK 2 Pro Series Manifold for GSR-$175
Fidanza B Series Flywheel(7lb)- $75
3.5" Aluminum exhaust with Vibrant muffler- SOLD!!!!!
JG 8 injector GSR manifold with lower rail and powder coated black- $350
SKUNK 2 Pro Series Manifold for GSR-$175
Fidanza B Series Flywheel(7lb)- $75
3.5" Aluminum exhaust with Vibrant muffler- SOLD!!!!!
Last edited by E Town DSM; Jan 24, 2014 at 11:10 AM.
Honda-Tech Member
Joined: Jul 2005
Posts: 57
Likes: 0
From: Gilroy, CA, USA
Re: Jan FS Thread
M&H 3.6/24-15 on weld draglites. Came off of an RSX-S.
Asking $350 + Shipping
http://www.flickr.com/photos/100071103@N04/11974692173/http://www.flickr.com/photos/100071103@N04/11974692173/ by http://www.flickr.com/people/100071103@N04/, on Flickr
http://www.flickr.com/photos/100071103@N04/11975224036/http://www.flickr.com/photos/100071103@N04/11975224036/ by http://www.flickr.com/people/100071103@N04/, on Flickr
Asking $350 + Shipping
http://www.flickr.com/photos/100071103@N04/11974692173/http://www.flickr.com/photos/100071103@N04/11974692173/ by http://www.flickr.com/people/100071103@N04/, on Flickr
http://www.flickr.com/photos/100071103@N04/11975224036/http://www.flickr.com/photos/100071103@N04/11975224036/ by http://www.flickr.com/people/100071103@N04/, on Flickr