Jan FS Thread
#1
Moderator
Thread Starter
Jan FS Thread
Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
EVERYTHING HAS TO HAVE PICS NO exceptions
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
EVERYTHING HAS TO HAVE PICS NO exceptions
#2
Honda-Tech Member
iTrader: (1)
Re: Jan FS Thread
Changing some things up and need to free up some cash.
Custom 5 gal Fuelcell made by JKOBD, -10 single feed, -8 return, -6 vent - $275
Source racing front end for EG.SOLD
Pricing does not include shipping or paypal fees.
Best bet is to reach me by text 205-4 zero 1 - 1433
Custom 5 gal Fuelcell made by JKOBD, -10 single feed, -8 return, -6 vent - $275
Source racing front end for EG.SOLD
Pricing does not include shipping or paypal fees.
Best bet is to reach me by text 205-4 zero 1 - 1433
Last edited by JdMhEaD; 01-13-2014 at 11:38 AM.
#3
Honda-Tech Member
Re: Jan FS Thread
706-346-6024
matt.stover@comcast.net
Clevite Race CB-1777HX ROD Bearing Sets(B Series):
$75 shipped
Clevite Race CB-1353H and HX ROD Bearing Sets(B Series, has oiling hole):
$75 shipped
matt.stover@comcast.net
Clevite Race CB-1777HX ROD Bearing Sets(B Series):
$75 shipped
Clevite Race CB-1353H and HX ROD Bearing Sets(B Series, has oiling hole):
$75 shipped
Last edited by SPOOLINmatt; 02-01-2014 at 06:55 AM.
#4
FOR SALE:: PRECISION PTE 8280 CUSTOM
FOR SALE:: PRECISION PTE 8280 CUSTOM
2000.00 OBO plus shipping and paypal fee's.
1.28 ar, 82mm custom wheel, great shape and rated at approx 1200-1300HP. This is a highly sought after turbo.
Precision back housing, 1.12AR. 250.00 obo plus shipping and paypal fee's.
2000.00 OBO plus shipping and paypal fee's.
1.28 ar, 82mm custom wheel, great shape and rated at approx 1200-1300HP. This is a highly sought after turbo.
Precision back housing, 1.12AR. 250.00 obo plus shipping and paypal fee's.
Last edited by elevatedj32; 01-07-2014 at 07:30 AM.
#6
Honda-Tech Member
Re: Jan FS Thread
All prices are + shipping and paypal fees.
Used Golden eagle B series head studs-$90
Used oversized flat bottom valves. I think they are +1mm. $100
UPR billet intercooler water tank lid-SOLD
New Honda engine bearings-$125
There are 26 bearings in there. Probably $250 worth.
15 used Supertech valve spring retainers. 1 missing for some reason.-$75
New MSD distributor cap for b series-$35
MSD HVC 2 coil. Red ones sold. Blue one left-$100
AEM fuel rail for b series with sample valve and SX regulator-$150
PWR radiator w/Spal fan for 92-95 civic-sold
Turbo smart 40mm wastegate-SOLD
Hks bov-$50
Unknown intercooler-$50
OG B series Spec twin disc clutch-SOLD
Intercooler water tank-$50
F22 drag turbo manifold-$50
B18C1 CNC race head for sale. This head was used in the BRE Hot Rod car, but has been reworked with a new valve job from CNC. It's all done, just needs to be professionally assembled. I know I would prefer it this way so everything can be confirmed to be correct during assembly. Valves, springs, and retainers are Ferrea. Comes with keepers, shims, and seal. All cam caps and oil rails included too. $1250
Xenocron b series cam degree kit. SOLD
JG Edelbrock intake for B18c1 $225
BDL 70mm throttle body-$200
Weldon 2025 fuel pump with fresh rebuild from Weldon. Filters included-$500 (sale pending)
MSD 75314 4cyl ignition box w traction control-$500. This is a $1000 box FYI! SOLD
Stock B18C1 longblock, new cam seals, rear main seal, oil pan gasket, valve cover gasket, oil pump, water pump, tensioner, and timing belt. Was gonna be my beater engine, do it's got everything you need new to mske it run for a long time. $1250 timing belt and cover not in pic. also, will have stock oil pan and pickup installed.
Used Golden eagle B series head studs-$90
Used oversized flat bottom valves. I think they are +1mm. $100
UPR billet intercooler water tank lid-SOLD
New Honda engine bearings-$125
There are 26 bearings in there. Probably $250 worth.
15 used Supertech valve spring retainers. 1 missing for some reason.-$75
New MSD distributor cap for b series-$35
MSD HVC 2 coil. Red ones sold. Blue one left-$100
AEM fuel rail for b series with sample valve and SX regulator-$150
PWR radiator w/Spal fan for 92-95 civic-sold
Turbo smart 40mm wastegate-SOLD
Hks bov-$50
Unknown intercooler-$50
OG B series Spec twin disc clutch-SOLD
Intercooler water tank-$50
F22 drag turbo manifold-$50
B18C1 CNC race head for sale. This head was used in the BRE Hot Rod car, but has been reworked with a new valve job from CNC. It's all done, just needs to be professionally assembled. I know I would prefer it this way so everything can be confirmed to be correct during assembly. Valves, springs, and retainers are Ferrea. Comes with keepers, shims, and seal. All cam caps and oil rails included too. $1250
Xenocron b series cam degree kit. SOLD
JG Edelbrock intake for B18c1 $225
BDL 70mm throttle body-$200
Weldon 2025 fuel pump with fresh rebuild from Weldon. Filters included-$500 (sale pending)
MSD 75314 4cyl ignition box w traction control-$500. This is a $1000 box FYI! SOLD
Stock B18C1 longblock, new cam seals, rear main seal, oil pan gasket, valve cover gasket, oil pump, water pump, tensioner, and timing belt. Was gonna be my beater engine, do it's got everything you need new to mske it run for a long time. $1250 timing belt and cover not in pic. also, will have stock oil pan and pickup installed.
Last edited by turbotypeR@SPEC; 01-31-2014 at 09:37 AM.
#7
Honda-Tech Member
iTrader: (4)
Join Date: Apr 2005
Location: South, Texas
Posts: 12,903
Likes: 0
Received 0 Likes
on
0 Posts
Re: Jan FS Thread
All prices are OBO and do NOT include shipping or pp fee's
Please PM me or for faster response txt 2034102574
Clutch Masters FX700 Small Spline clutch discs only, used for 5 passes. $200
V2 Competition Matte Black wheels with M&H 24.5x8.5x13 slicks SOLD
3" downpipe for top mount manifold with Vband to 5 bolt adapter and clamp $150
Bosch wideband sensors brand new, I have two available $50 each shipped
Send It Racing Ignitor Bypass Module $ 70
Carburetor Syncronizer Brand new in box $75
RCI 2050D Fuel cell with misc fittings and vent hose SOLD
Please PM me or for faster response txt 2034102574
Clutch Masters FX700 Small Spline clutch discs only, used for 5 passes. $200
V2 Competition Matte Black wheels with M&H 24.5x8.5x13 slicks SOLD
3" downpipe for top mount manifold with Vband to 5 bolt adapter and clamp $150
Bosch wideband sensors brand new, I have two available $50 each shipped
Send It Racing Ignitor Bypass Module $ 70
Carburetor Syncronizer Brand new in box $75
RCI 2050D Fuel cell with misc fittings and vent hose SOLD
Last edited by Turbo-LS; 01-20-2014 at 06:51 AM.
Trending Topics
#8
Honda-Tech Member
iTrader: (1)
Join Date: Sep 2005
Location: Waldorf, MD, USA
Posts: 2,234
Likes: 0
Received 0 Likes
on
0 Posts
Re: Jan FS Thread
Few things for sale any questions pm or text me 2402161030 i take paypal and can ship for extra thanks
T4 6266 81 ar vband exhaust housing 20 miles on it 800 obo
Hondata p28 ecu with boost control and s300 500 obo
Tial 50mm bov polished 180 obo
Inline pro b series stainless t3/t4 manifold 250 obo
Turbosmart 38mm wastegate and dumptube 175 obo
Ek intercooler piping with bov 180 obo
3" downpipe for the inline manifold has vband for the turbo side 130 obo
Brand new b series Clutch master stage 4 clutch kit 350
Brand new act b series flywheel 125
B series vtec valve cover Powder coated wrinkle black 100
T4 6266 81 ar vband exhaust housing 20 miles on it 800 obo
Hondata p28 ecu with boost control and s300 500 obo
Tial 50mm bov polished 180 obo
Inline pro b series stainless t3/t4 manifold 250 obo
Turbosmart 38mm wastegate and dumptube 175 obo
Ek intercooler piping with bov 180 obo
3" downpipe for the inline manifold has vband for the turbo side 130 obo
Brand new b series Clutch master stage 4 clutch kit 350
Brand new act b series flywheel 125
B series vtec valve cover Powder coated wrinkle black 100
#9
Re: Jan FS Thread
Everything is located in San Diego, but arrangements can be made for the non ship items to be picked up in Palmdale as well.
H22A4 Shortblock:
2001 H22A4 Shortblock. The block was attained from a Honda dealership in 2001. It was a warranty exchange on a new prelude that had a blown head gasket. Coolant leaked into one of the cylinders. The block just needs a simple bore/hone and its good to go. It comes with main caps, main studs and main girdle. I've had it for over a decade and unfortunately, I never got around to using it.
Asking $200 OBO - picked up
2001 H22A4 Crankshaft:
This crankshaft came out of the block I am selling. It is in excellent condition, no journal imperfections at all. It has been stored properly for as long as I've had it. It just needs to be micro-polished and it's good to go.
Asking $150 OBO picked up, or + shipping
H22 Cylinder Head:
This head is completely bare, comes with cam caps only. The head itself is in excellent condition. A perfect core for building.
Asking $200 OBO picked up, or + shipping
J35 (V6) Shortblock:
This is a complete J35 shortblock from the head gaskets down. All internals are included as well as the oil pan.
Asking $250 OBO - picked up
J32 Type S Cylinder Heads:
These heads are completely stock and both in excellent condition. Both front and rear heads sold together. The heads are disassembled but all valves, valve springs, retainers, keepers, rocker arm assemblies, etc will be included with the heads.
Asking $300 OBO picked up, or + shipping
Nuforms Rear suspension components:
This is the complete Mount/Bracket/LCA/Trailing Arm/Stabilizer Arm/Hardware kit/set from the Nuformz rear suspension kit for 92-00 Civics and 94-01 Integras. You just need to add your own struts from Stange, AJE, Lamb, etc, your own wheels and you'r good to go.
Asking $400 OBO picked up, or + shipping
PM me if you’re interested.
H22A4 Shortblock:
2001 H22A4 Shortblock. The block was attained from a Honda dealership in 2001. It was a warranty exchange on a new prelude that had a blown head gasket. Coolant leaked into one of the cylinders. The block just needs a simple bore/hone and its good to go. It comes with main caps, main studs and main girdle. I've had it for over a decade and unfortunately, I never got around to using it.
Asking $200 OBO - picked up
2001 H22A4 Crankshaft:
This crankshaft came out of the block I am selling. It is in excellent condition, no journal imperfections at all. It has been stored properly for as long as I've had it. It just needs to be micro-polished and it's good to go.
Asking $150 OBO picked up, or + shipping
H22 Cylinder Head:
This head is completely bare, comes with cam caps only. The head itself is in excellent condition. A perfect core for building.
Asking $200 OBO picked up, or + shipping
J35 (V6) Shortblock:
This is a complete J35 shortblock from the head gaskets down. All internals are included as well as the oil pan.
Asking $250 OBO - picked up
J32 Type S Cylinder Heads:
These heads are completely stock and both in excellent condition. Both front and rear heads sold together. The heads are disassembled but all valves, valve springs, retainers, keepers, rocker arm assemblies, etc will be included with the heads.
Asking $300 OBO picked up, or + shipping
Nuforms Rear suspension components:
This is the complete Mount/Bracket/LCA/Trailing Arm/Stabilizer Arm/Hardware kit/set from the Nuformz rear suspension kit for 92-00 Civics and 94-01 Integras. You just need to add your own struts from Stange, AJE, Lamb, etc, your own wheels and you'r good to go.
Asking $400 OBO picked up, or + shipping
PM me if you’re interested.
#13
Re: Jan FS Thread
#15
Honda-Tech Member
iTrader: (1)
Join Date: Aug 2007
Location: beech bottom, wv, us
Posts: 1,050
Likes: 0
Received 0 Likes
on
0 Posts
Re: Jan FS Thread
Everything is unused unless stated otherwise. Only put in for mock up.
200$obo Unused Skunk2 Billet 70mm TB with Vibrant VanJen clamp welded on, welded inside and out. comes with clamp.
400$obo Double back door Go Autoworks IC using VanJen clamps. Bov flange located on IC. 24x12x3.5 Turbonetics core.
BDL Cam gears 100$ can come with REAL arp hardware for 130$
200$obo Unused Skunk2 Billet 70mm TB with Vibrant VanJen clamp welded on, welded inside and out. comes with clamp.
400$obo Double back door Go Autoworks IC using VanJen clamps. Bov flange located on IC. 24x12x3.5 Turbonetics core.
BDL Cam gears 100$ can come with REAL arp hardware for 130$
#16
Honda-Tech Member
Join Date: Jun 2013
Location: West Coast
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Re: Jan FS Thread
New Tilton Twin Ceramic twin disc for B series Hydro, comes with flywheel $1500
For sale, DSS 5.9 Axles with spindles, very little usage. Two outings and it's been sitting ever since, it's been sitting around and collecting rust. $1400
Buyer will assumes paypal and shipping fees. Thanks for looking
If you live in the SoCal area, the parts can be pick up.
I could be reach @ 818.six two 0. eight Nine 00
#18
Honda-Tech Member
iTrader: (1)
Join Date: Jun 2003
Location: Turbo land, GA, USA
Posts: 1,984
Likes: 0
Received 0 Likes
on
0 Posts
GSR short block, wiseco pistons, crower rods, arp head studs, fresh bore and hone. Still need bearings and cranked installed asking 800
ACT single disk 6 puck clutch with ACT lightened flywheel asking 125
LS Hydro tranny asking 250
B series axles (both) with half shaft asking 100 for all
Precision 1200cc injectors asking 180
B series turbo manifold asking 50
Spearco air to water with passenger side tank. Meziere electric water pump 650
STR intake manifold with STR 70mm throttle body for GSR head asking 375.00
Prices don not reflect 3% Paypal and shipping fees
ACT single disk 6 puck clutch with ACT lightened flywheel asking 125
LS Hydro tranny asking 250
B series axles (both) with half shaft asking 100 for all
Precision 1200cc injectors asking 180
B series turbo manifold asking 50
Spearco air to water with passenger side tank. Meziere electric water pump 650
STR intake manifold with STR 70mm throttle body for GSR head asking 375.00
Prices don not reflect 3% Paypal and shipping fees
#19
Re: Jan FS Thread
brand new never used fuelab fpr.. its a 90-125psi MINI regulator.. never ended up needing so now its up for sale cuz it's just sitting in its box.. like I mentioned before it's brand new.. asking $125 plus shipping . pm me for any ?'s or txt 210-860-6057
#20
Honda-Tech Member
Re: Jan FS Thread
For Sale: SFWD Acura Integra
$8,500.00 “AS IS”
Serious Buyers Please***
$15,000.00 “Turn Key, Tuned and Ready to go”
Current Parts on Car***
Full-Race Turbo Kit
Full-Race Traction Bars
Precision T4 67mm Turbo
B16 head with full Supertech Valvetrain
Stock B16 Cams
10 Pt Cage w/ Window Net
Mishimoto Radiator
Edlebrock Victor-X Intake Manifold
GSR Transmission w/ Quaffie LSD
5.9 DSS hubs
3pc Exospeed Front End
Kirkey Seats w/ belts
Dual Bosch 044 pumps w/ FCS 5 Gal Tank
Fuel Lab FPR
CCC Street Wing
All Wired Up and Ready to Go
&W ignition box
Distributor and Plug Wires
IPG Drag Coilovers
ClutchMasters Twin Disc Clutch
Hasport Mounts
ASP Catch Can w/ PC680 Battery
Valvecover w/ Welded Breather Bungs
More Pics Upon Request
PM Me with any Questions!!!
UPDATED LIST!!!!
$8,500.00 “AS IS”
Serious Buyers Please***
$15,000.00 “Turn Key, Tuned and Ready to go”
Current Parts on Car***
Full-Race Turbo Kit
Full-Race Traction Bars
Precision T4 67mm Turbo
B16 head with full Supertech Valvetrain
Stock B16 Cams
10 Pt Cage w/ Window Net
Mishimoto Radiator
Edlebrock Victor-X Intake Manifold
GSR Transmission w/ Quaffie LSD
5.9 DSS hubs
3pc Exospeed Front End
Kirkey Seats w/ belts
Dual Bosch 044 pumps w/ FCS 5 Gal Tank
Fuel Lab FPR
CCC Street Wing
All Wired Up and Ready to Go
&W ignition box
Distributor and Plug Wires
IPG Drag Coilovers
ClutchMasters Twin Disc Clutch
Hasport Mounts
ASP Catch Can w/ PC680 Battery
Valvecover w/ Welded Breather Bungs
More Pics Upon Request
PM Me with any Questions!!!
UPDATED LIST!!!!
Last edited by DKPR87; 01-09-2014 at 01:31 PM. Reason: NEW ITEMS :-)
#22
Honda-Tech Member
Join Date: Oct 2002
Location: pittsburg ca (925)
Posts: 526
Likes: 0
Received 0 Likes
on
0 Posts
Re: Jan FS Thread
For sale golden eagle main girdle with bolts for b20/b18/b16 block this is brand new torque down to try it on $230 firm shipped and paypal fee included call or text 925-325-5005 for more info thanks
Last edited by newtype_33; 01-03-2014 at 03:35 PM.
#23
Re: Jan FS Thread
Contact me, Doug Fab.
401-595-7970 or Dougab88@yahoo.com
Taking offers. Want these gone so I can pay some bills
Garrett GT30R Brand New!
GT3076R Turbo WITHOUT Turbine Housing : atpturbo.com
Tial GT30R Turbine housing
Brand New!
Comes with both weld on flanges and clamps.
Housing, Tial, V-band inlet and outlet, GT/GTX30R, .82 A/R : atpturbo.com
401-595-7970 or Dougab88@yahoo.com
Taking offers. Want these gone so I can pay some bills
Garrett GT30R Brand New!
GT3076R Turbo WITHOUT Turbine Housing : atpturbo.com
Tial GT30R Turbine housing
Brand New!
Comes with both weld on flanges and clamps.
Housing, Tial, V-band inlet and outlet, GT/GTX30R, .82 A/R : atpturbo.com
Last edited by Doug Fab; 01-10-2014 at 06:24 AM.
#24
Honda-Tech Member
Re: Jan FS Thread
FS: GSR Cylinder head. Ported by Head Games. Fully built. Ferrera stainless valves, Supertech valve springs, Supertech Ti retainers. Built with bronze valve guides, new OEM valve stem seals, new OEM LMAs, etc. Head was rewelded and ported in the water jacket near cylinder 1. Head was then resurfaced. Head has been used for six events. Normal wear on rockers and cam caps. Does not come with cams or valve cover or vtec solenoid/sensors, etc. Brad Penn oil run at all times. Any questions ask.
Price = $1200.00 shipped in the states
FS: Mil-spec Hondata CPR harness. All brand new connectors, pins, seals, etc. Raychem DR-25 heat shrink, Raychem adhesive shrink, Teflon coated Tefzel wiring, Deutsch quick disconnect connector and OBD1 distributor plug for a plug and play engine bay setup.
Price = $200 shipped in the states.
Price = $1200.00 shipped in the states
FS: Mil-spec Hondata CPR harness. All brand new connectors, pins, seals, etc. Raychem DR-25 heat shrink, Raychem adhesive shrink, Teflon coated Tefzel wiring, Deutsch quick disconnect connector and OBD1 distributor plug for a plug and play engine bay setup.
Price = $200 shipped in the states.
Last edited by Blown90hatcH; 01-30-2014 at 04:53 PM.