Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here


Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.


From this point on, 1-1-2010, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings

EVERYTHING HAS TO HAVE PICS NO exceptions

 

sold

 

.....

 

Exospeed front end for EK.

Bought last year and painted black.

$700 plus shipping!

 

B series Liberty gear set. Total gear set has 30 passes on it. Recently upgraded the 3rd/ 4th slider to the 7 lug and also replaced 4th gear. It has a total of 3 passes on the upgraded parts. Comes with gear set, final drive and cuff. Also have DSS spool which can be included for an additional price.1st - 3.00, 2nd - 1.94, 3rd - 1.36, 4th - 1.00 , FD - 4.42 $3500


Used Weld Racing 15x3.5, 4x100 One Piece Magnum Import Skinnies anodized black with M/T 25/4.5-25 tires with a total of 3 passes on them. Few very small knicks on the rims $1100




NEW AEM 30-2204 4-Channel Thermocouple Amplifier, only opened for pictures. $250





Questions?Comments? PM me!

 

*4X100 5/8" aluminum spacers $80 per set



*b16a Head $350




*b series power steering pump with blue AEM pulley


*b series brand new wiseco roller wave pistons custom endyn spec 84.5mm 10.6-1 turbo pistons $500
comes with upgraded wrist pins locks and rings




*b series clutchmaster stg 3 clutch and aluminum flywheel $200


AIR intake manifold air induction research $850



*GSR camshafts for sale $100


*Smart Products Bead Form
bead roller with stand
great for fabrication intercooler piping radiator piping or anything that needs a bead $350



GReddy Turbo Exhaust for civic modified for 3" downpipe $400



faster response call/text 817-992-1706
or PM
paypal and shipping not included

 

PT6768 CEA $1500 shipped where ever.(Cheaper than a new non-bb!)
It only has a few dyno pulls, never tracked/driven.
Upgrading to a 72mm, so no need for this.
It's $2500 new from Precision!



Want to sell/trade my T4 Front Mount Turbo Manifold.
Trade for Full race/equivalent top mount. Or $900 shipped.
Only has a few dyno pulls.




Bnib JE 84mm 9.2:1 ls/vtec pistons. Pn# JE185917 $500 haven't seen them new for under $560
Machine shop over bored my sleeves, so gotta go 84.5mm.

 

Motec M800 with logging, advanced tuning, and dual channel lambda. posting for a friend asking $5500 or bo

Motec M880 Flying lead harness used but in great condition comes with utc hookup and autosport connector for ecu over 800 new asking-$550 or bo

Je Pistons 83mm bore 10:1 compression upgraded wrist pins used but in good condition-$300 or bo

AEM V1 1060 box setup for trigger kit but can be converted back-$700 or bo

3.5" Aluminum Exhaust with Viabrant race muffler for EK might fit other models $500 or bo

Hasport 94A Motor Mount Inserts hardest they make before solid-$75 or bo

MSD Digital 7 Ignition setup 75314 box with higher output for drag racing. The gold box that can do traction control, step retards, gear based retard, etc. A very important piece in getting those short times down used on all the fastest fwd cars in the world. Comes with the noise capicitor. Will also include new harness. Complete setup $700 or bo

 

2007 open 18' car trailer. Includes winch, aluminum tounge box, extended ramps for really low cars, electronic brakes on both axles. $2500obo

New trailer is ordered so this one has to go.

 

4" dp 250 shipped

gsr valve springs make offer

gsr retainer - make offer

oil restrictor -35 shipped

 

For sale a moroso H22 oil pan with an extra fitting welded in bc I ranexternal oil pump. Can plug that off. Have a small dent in bottom of pan from jack. Looking to get $350 for it. baffled and can hold 5 quarts of oil. I have a twin disc spec clutch with very light usage for sale, has a extra ring gear and surface area. I'm looking to get $650 obo. I have a msd digital 6 box with a hvc coil, all good working order, $350 or obo. I also have an ati dampner for a h22 $250 and i also have a prodrive spool for $350. I also have a set of brian crower turbo cams,new in the package,$350. I also have a full race front facing turbo manifold, heat coated and heat taped.Give me a good offer for these parts, and i will consider these offers.
You can call or text me 203-430-3394, if need pics on the stuff

 

POST PICS!!!!!!!!!!!!!!!!!!!!!

 

x2

 

innovate lc1 sold

B series linkage $70 shipped


holset h1c bought never used seems in perfect working order. is missing retainer for exhaust housing and needs outlet flange welded on. sold

z6/y8 .5mm oversize valves $75 shipped


p75 head about 1k since rebuilt sk2 springs and reatainters installed $250

p28 head $75 no vc



cp 81.5mm (I believe) pistons. pistons,pins and locks. scratches on skirts $150




prices do not include shipping unless noted +pp fee on all items

 

B-series G-Force Gearset- Price drop $3800

Perfect condition ready to be installed. Im from the UK but will be going Orlando very soon, so can bring with me. You get 2 final drives iswell 4.0 and 4.7. I can email anyone close up pics if requested.

1st- 2.92
2nd- 1.88
3rd & 4th have been upgraded, so I need to count the teeth and work it out.

 

Mint 4inch alum exhaust off dc2 stock fitment 300$
Treadstone intercooler 3.5 thick supports 800+. back door set up sold
Buyer pays shipping & fees 203-278-2806 jb located in CT.

 

nrg tech billet case v2......1550 shipped
used t1 gforce shifter.......750shipped....(pending sale)
84x89 dart race block built by nrg tech to 1000whp specs..cp/manley with upgraded wrist pins and +625 bolts(rated at 300hp per rod)
fully machined and preped...casting clean up,welded deck for better headgasket seal...step deck for high boost...includes bnib itr oil pump
lighly used ati race pulley moroso oil pan and golden eagle heastuds.......pick up only...will not ship........................$5500

 

IF INTERESTED CALL 973)390-2982

B-series shift linkage with a B16 shifter*

4" aluminum exhaust $650





custom catch can sits next to the battery $275
the bracket is welded onto the battery tray*

comes with
battery tray w/ bracket welded to it
all 4 lines and fittings minus the 2 fittins on the actual block




wrinkle blue valve cover $100

 

FS: GSR Windage Tray - P72
Price = $20 shipped in the states

FS: Low Down universal seat rails and sliders.
Price = $45 shipped in the states
Came from...

http://www.htarchive.net/showthread.php?t=2370055

 

bare GSR head (no cams/no rockers/no rocker shafts/no valvesprings/no valvecover) the head does have cam caps + oil rails + bolts 300.00 +shipping

GSR head, is mostly complete minus cams 350.00

bare GSR block with main caps 350.00 + shipping

bare GSR block with main caps 350.00 + shipping (yes i have 2)

skunk2 gsr intake manifold SOLD

Ferrea roller rockers for b series (red ones) 850.00 + shipping (these are brand new, still in packaging)

"RHS" GSR cyl head, full ferrea valve train, custom valve springs. ported + polished + flowed, all work done by Eds racing heads + headgames motorworks. head is brand new still 2500.00 + shipping

__________________________________________________ _______

1992 honda civic si racecar chassis


***asking 7500.00***

(this does not include suspension/wheels/drivetrain)

* carbon fiber 1 piece front end (is currently in primer)
* 10pt chromoly cage with parachute mount/wheelie bar hookups
* Custom aluminum dash, door panels and interior panels, all painted gunmetal grey
* chromoly wheelie bar with wheeleze wheels
* stroud window net
* omp race seat
* FAL lexan windows (race kit) * Lexan sunroof *
* MB Products fiberglass doors with chromoly frames and lexan window with stainless allenhead bolts/nylock nuts
* Tube front end with midplate & chromoly timing belt side mount
* clearanced for 28" tires.
* Acura sundance gold pearl paintjob
* entire chassis was sand/bead/media blasted before paint
* spare tire well is cut out, with flat aluminum panel covering


















__________________________________________________ _______________
__________________


Acura Integra race chassis 5750.00

this is pretty much a shell at this point. i bought the car, added a few things and never got to run it.

* 10 pt chromoly cage
*Jojo wide front end (closed mouth) mounted with tubular frame & dzues buttons
* custom aluminum under body tray/catch pan, with quick release mounts
* carbon hood and carbon trunk --color matched
* gas tank has full race sump installed











__________________________________________________ ______

MOTEC M400 engine harness
built by me, with tefzel wire/raychem dr-25, deutsch connectors etc. 1200.00 OBO


*Harness is setup for 12 injectors, t1 cam trigger, emap, strain gage + all the other "normal sensors"

this is the harness before i added in the extra 4 injectors (it now has 12injectors )



__________________________________________________ ______________________________
Front mount turbo manifold
850 shipped

*304 sch 10 stainless - tig welded
*t4 flanged
* flanged for tial MVS wastegates
*includes wastegate dumps and exhaust pipe




__________________________________________________ _



JMF intake manifold for p72 head with wilson 105mm throttle body 750.00 shipped

* throttle body has vibrant 4inch v band flange welded on
*setup for 12 injectors
* i used this manifold with Golden Eagle MFG fuel rails, so any fuel rails for b series will . no need for custom rails





__________________________________________________ __
Garrett Gt4202R Turbo
- 74mm
-1.10 a/r exhuast housing
- ball bearing
-water cooled
- includes inlet restricter flange
- includes compressor and turbine discharge flange and v band clamps

1250.00 + shipping









__________________________________________________ __




JM-Fabrications / Spearco water to air intercooler
* 4-inch v band inlet and outlet
* -12AN water outlet fittings
* -12AN drain

550.00 Shipped










__________________________________


lines/fittings for water to air intercooler
* 12an fittings on tank & intercooler
* 3/4 shut off valve on tank for drain
* hose is 3/4 inch
85.00 shipped





_________________________________

Hydraflow clamps 225.00 each
* fits 4inch tube
* i have 4 clamps





______________________________________



* OMC coils (coil on plug) with bracket
- fits b series vtec heads
225.00 + shipping









_________________________________________________




* eibach front and rear sway bar kit with endlinks etc, i belive its everything for installation. 250.00










__________________________________________________ _______



__________________________________________________ _______

Weld wheels



*15x8
- 5x4.75 lug pattern
-4inch backspace
500.00 + shipping



__________________________________________________ _____________________________



* weld spindle mount skinnies

* 5 star (anglia spindle)
950.00


__________________________________________________



*holes (strange spindle)
1200.00 w/ the brand new tires on them



__________________________________________________ _______

 

45 gallons of Rockett E85 for sale.

112 octane.

$400

 

ALL PARTS FOR HONDA S2000

New Haltech Pro Plug In AP1$1250 Shipped

New Full Blown dual hanger $379 Shipped

New FB340 Fuel Pump $140 shipped

New Bosch 1000cc Injectors $350

Hondata Harness and Modified Ecu for DBW. $350
Everything in pic included. all you need in any Hondata Kpro. ANY K Pro for K20swap, 02-06 RSX will work..


Mase Kit
Turbo Manifold T3
Tial Q BOV
Tial MVS wastegate
Heat shield
Down pipe
Recirculating dump tube into downpipe
Open dump tube
Precision Intercooler
All cuplings and clamps
All v band clamps included



No turbo or oil lines
No Intake charge pipe. Sold my intake pipe with the Full Race back door I used.

$2400 Shipped


WILL NOT PART OUT

 

Carrillo rods steel for K24 Brand new in a box! $699 shipped anywhere! Only got one complete set.

Rod bolts are 3/8 Carrillo S6-S-A14
Center to Center 5.984
P.E. Bore 0.8672
B.E. Bore 2.0080
P.E. THKS 0.770
B.E. THKS 0.782
have spec sheet included

 

Bullseye S366XL T4 Divided 1.10AR
Brand new, never used.

$960 OBO

 

Kenne Bell Boost-a-pump "Single" You can run this with dual intank pumps. or single pumps. Retails for 289.00 Im taking Best offer.
http://www.kennebell.net/accessories...boostapump.htm