how did you guys keep the crank from spinning while torquing the crank pulley bolt? i know there's an installation tool from fluidampr but i'm not tryin to pay $140 to install this $350 pulley. i was thinking of bolting a piece of steel stock to 2 of the bolts on the pulley and letting it rest against the ground when i torque the crank bolt.

 

Im assuming the motor is in the car. if its not. use a flywheel holder.

 

With the car on the ground, put it in gear and have someone hold the brake.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ninesecrx &raquo;</TD></TR><TR><TD CLASS="quote">With the car on the ground, put it in gear and have someone hold the brake.</TD></TR></TABLE>

ahhhhh why the hell didnt i think of that? thanks.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RPRacing &raquo;</TD></TR><TR><TD CLASS="quote">Im assuming the motor is in the car. if its not. use a flywheel holder.</TD></TR></TABLE>

yeah the motor is in the car, sorry i forgot to mention that.