When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Please read the rules for the new thread
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If you find what you're looking for please remove them from your post. If you find everything off of your list of parts, report your post to moderator by clicking on the just under your user name and I will delete it.
3)You are ONLY allowed ONE in this thread, if you are found to have more than one post, all of your posts will be deleted.
4) NO FS ADS!
5) KEEP REPLIES IN PM'S
We will delete any BS we feel does not belong in here
From this point on, 1-1-2010, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. This will be adhered to. No more warnings.
Selling my Alaniz cylinder head technologies competition ported GSR head, it has been used less than 500 miles after ported, it was a untouched head and had low mileage when ported, have never been repaired and no stripped threads, has been already decked since it was going to be used but plans changed, comes with matching cam caps, water neck and all bolts (not pictured) nothing else, could use a good cleaning save lots of time and money, if you have any questions PM me, price is $1250 shipped to the lower 48, which is a great deal considering what i have into it.
PICS
Last edited by civic00sir.; May 14, 2018 at 08:16 PM.
Reason: Lowered the price
Got some parts that I wasnt able to use on my build up for sale. All parts pretty much brand new only mounted and never ran! Prices include shipping. Paypal add fees on top. Paypal verified and eBay 100% feedback.
Purple Tial Sport V60 60mm wastegate with 7.58psi spring + extra spring - SOLD
Myers Competition fill pot for GSR head with -16an male bung no fittings or cap - 160 shipped OBO
Pegasus 3" purple wiggins style clamp - 45 shipped OBO
Pegasus 3.5" purple wiggins style clamp - 65 shipped OBO
DM me for faster response if you have any questions.
Text/Call 657 240 9782
Sheepey Inc. Complete Turbo kit- $3300
Sheepey Inc. B Series Top Mount T4 Twinscroll Turbo Manifold- $1000
Sheepey Inc. 3 inch vband up pipe and dump tubes-$375
Sheepey Inc. 3 inch vband downpipe $250
Sheepey Inc. Honda 850hp Back Door intercooler 2.5in inlet 3in outlet with piping for skunk2 ultra 4.5L with couplers and clamps-$750
2x Turbosmart 40mm compgate wastegate-$550
Tial Q 50mm BOV- $220
Precision 6266 journal t4 twinscroll 1.15a/r- $800
Hondata obd1 s300v2 -$500
Hondata Coil Pack Retrofit with harness, 4 Honda OEM Coils
Rywire adapter plate and billet distrubitur cap-$750
Weld Racing 13x10 with M&H 24.5x9.5x13 and Weld One Piece Skinnies Black 15x3.5 4x100 with tires-$1700
GPRauto Integra 3 Piece Wide Front End-$600
GSR transmission with Mfactory LSD-$1000
CCC Racing carbon wraped Drag Wing-$200
CCC Racing SunRoof Plug for Integra-$50
B series stock axles-$100
Go-Autoworks Half size radiator-$50
Spal 13inch push fan-$80
G-Force Racing Latch and Link Harness 6000BK expired-$50
G-Force Racing Camlock Harness 7000BK good until Feb 2020-$120
Hasport Motor Mounts DCSTK U70A-$250
Bare GSR Block with caps-$100
Please read the rules for the new thread
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If you find what you're looking for please remove them from your post. If you find everything off of your list of parts, report your post to moderator by clicking on the just under your user name and I will delete it.
3)You are ONLY allowed ONE in this thread, if you are found to have more than one post, all of your posts will be deleted. 4) NO FS ADS!
5) KEEP REPLIES IN PM'S
We will delete any BS we feel does not belong in here
Mod can delete this after viewing. Just wanted to point out the above bold should probably be removed lol
Selling my race program....Looking to change direction a little.
Keeping it low key
Sale would include re balancing and scaling for new owner and verified professional tune. WHP estimated based on MPH achieved...we do not play stupid and run our race cars to 1000hp on a dynamometer for cheerleaders.
I am not a business and MSSRACING IS NOT a business.
706-346-six 0 two 4
Asking $36,000
99 Honda Civic Hatchback
Full Specs: 1999 Honda Civic Hatchback
Has a title of course
Freshly setup for traction control, etc.
Best 1/4: 9.21 sec.(2018)
Best 1/8: 5.95 sec.(2018)
Best 1/4 MPH: 167 mph(2015)
Best 1/8 MPH: 135 mph(2016)
Current Est.WHP: 950+
Tuning: Matt Stover, Mike Amerson EMS: AEM Infinity 508
Fuel and Electrical:
Renegade E112 Ethanol Fuel, Weldon 2345-a Fuel Pump, 2200cc ID Injectors, 1000c Secondary ID Injectors, Weldon Regulator, AEM 5 Bar MAP, Custom Engine Harness
-Spark: Coil On Plug, T1 Cam Trigger, AEM Infinity 508, AEM CD-5 Display, XSPOWER 16volt Battery
Engine/Transmission:
MSSRACING Built Engine
B18C1 Block / B18C1 Head coated by Coatings M.D.
Golden Eagle HD Sleeves
R&R Aluminum Rods
Arias Pistons coated by Coatings M.D.
Mahle-Clevite Race Bearings coated by Coatings M.D.
Ferrea 6000 Series Intake Valves coated by Coatings M.D.
Ferrea 6000 Series Exhaust Valves coated by Coatings M.D.
Ferrea Valve Springs and Retainers
Sheepey, Inc. Custom Roller Cams
Ferrea Roller Rockers
Golden Eagle Cam Gears
Skunk2 Ultra Race Intake Manifold Wavetrac LSD
Pfitzner Performance Gearbox Race Transmission
Competition Clutch Triple Disc Unit
Gforce Shifter
DSS Pro Level Axles
Pro Level Differential
ATI Race Damper
EBTEC Catch Can
Turbo Elements Custom Radiator Setup
Forced Induction:
Borg Warner Airwerks 67.7 FMW Turbo
Bell Intercooler Core with Custom End Tanks by EBTEC
4” Top Exit Exhaust and 2.5” Dump Fabricated by EBTEC & coated by Coatings M.D.
BoostJunkyz Forward Facing FTW Manifold coated by Coatings M.D.
TiAL Sport 60mm Wastegate
TiAL Sport Blow Off Valve
Chassis:
10 Point Custom Roll Cage - MSSRACING/EBTEC
KKC Brake Booster Delete
Progress Suspension SFWD Coilovers
TR Fab Rear Extendable and Adjustable Trailing Arms
ESM Rear Fully Adjustable Spherical Control Arms
Kirkey Racing Pro Drag Seat
Stroud Super Comp Parachute
3 Piece Forged Aluminum STAR8 Drag Wheels
Source Racing Wide Front End
MH RaceMaster 24.5” Drag Slicks
Innovative Mounts
Skunk2 B/H series Pro XP valve springs and retainers. These were used for only 2 dyno sessions and still measure 93 lb seat pressure and 238 lb open pressure. Asking $450.
865-three86-three74nine (text message)
B series non vtec Crower dual valve springs and titanium retainers. Brand new in box. Will sell for $290 shipped including PayPal fees. Fit p75, pr4 and p8r cylinder heads. In original unopened packing.
D series brian crower single valve spring kit. New in box. Works perfect with stock retainers as well as aftermarket. $90 shipped including PayPal fees.
FS Thread 2019
