First 1.5 60ft
Thread Starter
Honda-Tech Member
Joined: Feb 2004
Posts: 425
Likes: 0
From: West Seneca, New York, U.S.
Just excited ive been shooting for a 1.5 for 2 years now finally cracked it. It was a 1.59 but at least i know the car is capable and possibly has room for improvement. I also tied my best et in my car the run went like this.
1.5951 60ft
4.6890 330ft
6.7543 594ft
7.2139 1/8th
97.91 1/8th
Not bad a dd street car LOL
Car has been giving me crap all season just nice to have it come together finally. Now Saturday im going to the 1/4 and trying to get my first 10sec pass under my belt hopefully all goes well.
1.5951 60ft
4.6890 330ft
6.7543 594ft
7.2139 1/8th
97.91 1/8th
Not bad a dd street car LOL
Car has been giving me crap all season just nice to have it come together finally. Now Saturday im going to the 1/4 and trying to get my first 10sec pass under my belt hopefully all goes well.
Thread Starter
Honda-Tech Member
Joined: Feb 2004
Posts: 425
Likes: 0
From: West Seneca, New York, U.S.
Eagle rods with CP pistons 9:1 comp stock head with springs and retainers. And a Peakboost turbo kit with a t3/t4 57trim. Ive gone to the 1/4 and ran a bunch of 11.1s with the car breaking up in 3rd and 4th seems like i got rid of the problem so 10s should be there.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Honda Bull »</TD></TR><TR><TD CLASS="quote">Good to hear, man. 
What size/make slick are you using?</TD></TR></TABLE>
Also what suspension setup?

What size/make slick are you using?</TD></TR></TABLE>
Also what suspension setup?
Thread Starter
Honda-Tech Member
Joined: Feb 2004
Posts: 425
Likes: 0
From: West Seneca, New York, U.S.
Right now i have KYB AGX shocks all around ebay front coils i believe there 400lbs springs 1000lbs skunk 2 springs in the rear and 25x8.7 R13 M&H.
I had a traction bar on the car at the beginning of the year but a small accident ruined the bar and the mount area of the frame so i was out of luck on that. Over winter i may be able to figure out something to get the traction bar working again.
I had a traction bar on the car at the beginning of the year but a small accident ruined the bar and the mount area of the frame so i was out of luck on that. Over winter i may be able to figure out something to get the traction bar working again.
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Feb 2004
Posts: 425
Likes: 0
From: West Seneca, New York, U.S.
There is a 1/4 mile track but its a little over a hour away i have an 1/8 mile track like 10 mins away from my work so i usually just shoot over there on tuesdays for test and tune.
Thread Starter
Honda-Tech Member
Joined: Feb 2004
Posts: 425
Likes: 0
From: West Seneca, New York, U.S.
Yep pump gas and the car im guessing is between 2300-2400 with me in it.
Car is a simple set up rods pistons boost and alot of time at the track to get it done.
Car is a simple set up rods pistons boost and alot of time at the track to get it done.
Thread
Thread Starter
Forum
Replies
Last Post




