Almtrhb

iTrader: (3)

The Tranny went together so smooth. Albins did a good job on there gearset, the instructions that were supplied were pretty much dummy proof even tho Fatty is a seasoned tranny builder haha.... Pro Series Wavetrac diff, I tried to get a billet case from sum dude on here for 3 fuccin days I waited for pics and a price he didn't give me ****. That was a forsure SALE, you cant fix stupid right.
Thanks to Albins for the gearset and my boy Fat Kid on the assembly.

Do-Work

iTrader: (1)

you're going to be one heavy hitting competitor once the car is done and back at the track

luck4rmkc

iTrader: (2)

Love the helical cut gears of the albins box. That may reduce the shaft separation issues and reduce the need for the billet bell housing anyway.

crazyjetsfan22

iTrader: (5)

Almtrhb

iTrader: (3)

Got the motor in the car, went to Motec today and seen my harness. Almost done with the engine side, Cabin harness is done... Getting there almost ready to tune...... Man my phone takes sum shitty pics... I really gotta get a new phone.

eg_YANG

Should be a heavy hitter.
Looks like christopher is doing a great job with all those fabricating.
Cant wait to see this thing in bakersfield for wcn.

CO_RaceFab

?

Almtrhb

iTrader: (3)

Yea those are LA sleeves, and as far as the crank goes. It measured pretty good out of the box.

01typerboi

lookin good. nice progress.

P.S.I Garage

Love the rebuild on this. Was a fan of the original build. Can't wait to see this beast run again. Are you going to make it to WCN on the 21-22nd?

Almtrhb

iTrader: (3)

Yea thats the plan to make it to the WCN event.
Besides that i was having a horrible time bleeding this Tilton hydro bearing..... MAN, i almost destroyed the whole car cuz of that nice piece of equipment hahaha. In my smart *** voice. Got the staging brake installed, and the Moroso switch panel the car is bout 94.7% done.... Should fire up this Friday

P.S.I Garage

What issues did you have with the throw out bearing?

Do-Work

iTrader: (1)

So beautiful and well done

Almtrhb

iTrader: (3)

Fluid wasnt comming out of the bleader valve, so i left it alone for a few hrs and came home and fluid finally came out.

Thanks for the kind words, hopfully i can use the WCN event as a shake down do sum testing after and be good for Vegas in Nov...

meane30

Yeah buddy! We'll hopefully be bringing out two hard hitting 67mm cars to play! Good luck this week buddy

CO_RaceFab

f yes make that 3 with rogers

Almtrhb

iTrader: (3)

Did Morgan's *** figure out sumthan better than Jaeger to drink cuz that **** aint gonna fly hahaaa... Should start tuning on Monday the 16th. Alil late for my likeing but James from MoTeC is outta town so it is what it is.... Hopefully it goes smooth tryna learn this new system is gonna be a bitch too...

Almtrhb

iTrader: (3)

Aight the day has finally come... Will update when i have sum info on if ima make it to WCN or not. Thanks to Randy from ESA designs for the shirts i really appreciate it, Give him a email or call for any design. He's a coo cat to talk to, And Doug from POWER PROS reppin the shirt

tuhboek

good luck looking great!

meane30

Yeah, tequila or gin is good for us!! Haha

Mr.Sw20

iTrader: (1)

Love the car!

Almtrhb

iTrader: (3)

Thanks, If i coulda made a clean pass sat night i would have but that kinda happens when people dont listen to you... Car went out with a 5k launch and 5.5k rev limiter (the rev limiter was accidental) hahahaaaa I can laugh at it cuz I said it wasnt gonna work but who am I right just the owner/Driver who made the car get to a 9.3 in a total of 6 full passes with the car. Then after that run was a waste now ok ill try your way of doing things. BUTTTTTTT we dont get a 2nd pass sat night so now gotta wait till sunday. Sunday comes and load the settings i came up with and the cam trigger wont sync with the cam gear. Dont know why but it wont start so i cant race. Jeeeeez ohh well **** happens

Elementracing

I hope i don't have to line up with this monster car any time soon..........like AZ.....or Vegas! my car only makes 600hp !!

209lsr_ly

iTrader: (1)

^^ **** happens. Next time bro

Hopefully I line up with you when my car is done

Almtrhb

iTrader: (3)

Hahahaa, Well IDk if you dont go to AZ it aint gonna be the same. So maybe ill do sum testing before vegas and come out and crack that number...

Yea get the car done and join us in this wonderfull thing called drag racing. Just dont go to a WCN event to try it hahahaaaaa. Im fuccin retarted its great