FS: (Louisville, KY)

Never Used!!!! Darton Sleeved GSR block B18c1( By: JoTech Motorsports Dallas, Tx. )!
Includes micropolished GSR crank, in great shape, no damage.
GSR Girdle, all main caps and OEM main bolts come included.
Comes with everything you see in pictures.
Can include gsr oil pan for free if you want.(dented on bottom)

Need to sell asap. Block was 300 bare. 1500 for sleeving. Going a different route.

*****ASKING $1200, OBO*****

 

Will pay shipping on small parts and willing to work with seller on half of shipping on larger stuff. email me for more pictures or PM me with questions.

PAYPAL VERIFIED ONLY PLEASE !!!!!!!

Password JDM conversion harness obd2a to obd1 45.00


Digital 7 Programmable with HVAC coil 750.00


Digitial 7 Hand Held Programmer 135.00


Aeromotive Filter with 100 stainless Micron filter 50.00


Precision 1600cc injectors NEW use for dyno only. 365.00 shipped



Mazworx Scatter shield 150.00



MSD igniter 40.00


ARP Main Studs 2 sets 50.00 each set


Obd2a to OBD1 conversion harness Brand new 85.00 from Lightning Motorsports SVE brand.


01-05 Honda Civic lowering Springs 1.5” Sprint 65.00


Tial 44mm Large Springs 22.00 each

1) Green .8 bar 11.60 psi spring


2) Yellow .6 bar 8.70 psi springs


Fluidampr B series Street damper Brand New 295.00


Neptune Dataloging cable 35.00


IPG V1 Turbo Camshafts with GE cam gears 400.00 obo


Speed sensor GSR 45.00 i have 2


Integra mounts 35 each


OBD2a Engine Harness Injector resistor all wired in with resistor box, 5 bar map wired in. everything is all reloomed.


2 Tial Polished 44mm gates 14psi springs in both selling seperate or together your choice. 320 each shipped


Borq S372 Turbo Brand New ran few pulls on the dyno.
1.25 a/r exhuast housing
High Output Compressor cover with V-band welded to it
Antiserge delete Installed
Fully polished cover
everything listed 1450.00 shipped



Virtual Works Top Mount Manifold
Wastegate Dump Tubes
4" down pipe with Flex and V-band will fit with both GT42 or s372
1450 for everything



Virtual Works Intake Manifold with Accufab 90mm Throttle body
comes with cable, IACV, Push lock Fittens for vaccum sources
For GSR head Fully polished also TPS is included.
1250 shipped



Small smudge will polish it clean before i ship lol i did have little dirty hands removing it lol but no scratches at all.


Oil return with billet flange and -3 oil feed with earls inline filter 75.00 for both


Golden Eagle Cam Gears Black 175.00


Greddy GSR timing belt 75.00 shipped


Virtual Works Intercooler with Gerrett Core Polished end tanks with intercooler piping. All V-banded 3.5" piping from Intake manifold to intercooler then 3" from intercooler to Turbo. everything is fully polished. Intercooler piping was built for EK Hatch //// Deminsions of core is 24x12x4 1150hp rated
1250 will seperate






will make a Package deal on the whole turbo kit together Intake,Exhuast manifolds tial wastegates, DP,DT, Intercooler and piping all together. As long piesces havent been sold or will make what we can together is some stuff has sold.

Autometer SALE



Electric fuel Pressure Gauge
#4363 with sensor 150.00


Electric fuel Pressure Gauge
No sensor 75.00


Trans Temp Gauge
#4357 35.00


Nitrous Pressure Gauge
#4328 65.00


Boost Gauge 0-35psi
#4304 40.00



3 3/8s Tach 0-10,000 rpm With mounting cup
#6604 185.00


Oil Pressure Electric
#4353 40.00




Modified by buck02 at 9:10 PM 8/29/2008

 

selling my Bogart Fly-star's. The fronts are 13 x 8 with 24.5 x 8 13 M & H with 7 passes on them. The rears are 15 x 3.5 with 25 x 4.5 x 15 Moroso DS-2's. I'm looking to get $1200 obo for them. Buy will have to pay the shipping. Call me at 774-955-9556.
thanks Jimmy


Modified by 92turbove at 2:07 PM 8/18/2008

 

i have a brand new turbo xs dual stage boost controller , comes with everything

$150 obo

i just need this gone asap





ready to ship

 

FS: -- Motec M4 ECU (just the box, no wiring harness) but will include the Datalogging cable and Plug so if you want to make your own custom harness you can.

This is the M4 ECU with the Advanced Functions and Lambda already unlocked (only 2 options available for the M4). This was purchased from Motec USA back in 2004 so it is supported by Motec USA

we have used this M4 over the past 3 years on my race car with great success, just selling it because we have recently upgraded to another Motec box.

Retail on the M4 with the options unlocked is $3009

asking $1800 for it. (remember, this box has the $1k worth of options unlocked already)

you can get the Honda Plug and Play Harness from T1RaceParts.com if you plan on installing this into a Honda

I also have an OEM Honda Distributor with the Motec plug installed into it that is required to run the ECU if available if you are running on an OEM Distributor still

this M4 also has a pretty bad *** map loaded in it that you can work with if you like to get you ahead of the game (2.0L GSR Turbo, 1600cc injectors)

Email -- James@IPGParts.com
or call - 407-324-4684

 

I have a couple things for sale

780cc precision injectors used for 2 races $175 obo + shipping
Turbosmart eboost2 silver bezel good up to 40 psi $200 obo + shipped





Modified by adam1027 at 11:17 AM 8/25/2008

 

I have a set of Rocket Motorsports GENERATION 1 Valve Springs for sale, rev to 10k no problem in my race car only. Only selling because they will coil bind with my skunk2 pro 1's.

B SERIES VTEC is what they came out of and i used them in.

90$
matt - 706-346-6024




Modified by SPOOLINmatt at 11:43 PM 8/17/2008

 

testing waters on my welder:



<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Matco tools page &raquo;</TD></TR><TR><TD CLASS="quote">Great shop style MIG welder for smaller shops doing general repairs and fabrication.
Also works as a great second or back-up unit for larger shops.
Comes complete with 10 foot ground cable and MIG gun, sample spool of .024-in. steel welding wire, extra contact tips and nozzles, and gas regulator.
Six heat settings.
Cold wire design - no false arcs.
Welding range from thin 24 guage steel up to 5/16 in.
Handles solid MIG (with shielding gas) or flux cored welding wires. Easy polarity change terminals under hood.
Twin spindles to hold two different spools simultaneously (1-4 in. spool, 1-8-in. spool saves time when changing wire types).
Large cabinet to handle full sized (30#) spools.
Built-in cart for mobility - handles small to medium sized gas cylinders.
Quick set drive tensioning system - toggle release to maintain optimum tension when changing wire spools.
8 foot power cord (customer supplied (male) plug) - 220 volt.
130 amps @ 30% duty cycle.
Max output 180 amps.
Recommended max thickness to weld = 5/16" single pass.</TD></TR></TABLE>

600/wo 700w/ 7525 bottle.
prefer pickup, but halfway up to 150 miles round trip, ill take the hit. more than that, we shall see.

located in delaware.

NIB:
crower b series springs and titanium retainers
350 shipped
arizona speesd and maring first gen b series mounts crx civic
100 shipped
vafc (original ) new never installed
100 shipped
straight t4 turbo and sfp t4 log manifold NO WASTEGATE FLANGE. add what everone you want
450 shipped for both
txs rfl bov
looks new but there are scuffs on the plunger
100 shipped
b16 dizzy external coil kit
msd cap and blaster ss coil
100 shipped





Modified by boostedcivicsir at 5:22 PM 8/30/2008

 

BRIDE Gias Low Max Seats (Like new) with rails & brackets for sale $1,500 shipped

SOLD !!!!

Fernando @ CFT


Modified by tunedbycft at 6:05 PM 8/25/2008

 

Ls head- Head is complete. Powder coated valve cover(black). Comes with KMS valve springs and titanium retainers(less than150 miles).-$275

Thank You





Modified by kenbdSi at 8:03 PM 8/19/2008

 

b16a pr3 usdm honda ecu

100

 

AEM EMS 1020 - $700




ARP B16 Headstuds. used for 3400 miles. $55
B16 timing belt 3400 miles- 25
ICM for dizzy brand new $50
B16 Crank Pulley $40
Koyo Integra Radiator. with summit 12" slim fan $175
4- 3" Vband Clamps and 1 2.5" -$15 each

 

sold


Modified by 1QwIkEf at 11:45 AM 8/26/2008

 

FS: Golden Eagle Intake Manifold for GSR heads

Blew up my motor, so have no need for it.

350+ shipping, might even toss in my hondata intake manifold gasket for ya too


here it was on the car:

 

eagle long rods
https://honda-tech.com/zero...68817

 

T1 cam trigger sensor kit with pigtail. Used (minus bracket)
350.00 + paypal fees Shipped to your door!




Modified by SYD at 6:46 PM 8/29/2008

 

I am selling a set of new Holeshot Modstar rims with Hoosier Quicktime Pro DOT tires. Tires were mounted on the rims and mounted on the car to be rolled around. The tires and rims were never driven on. They have only served mock-up purposes.

Rim specs:
- (2) Holeshot Modstar, 15"x4", 4x114.3mm/4.5" lug pattern, 1.875" backspace (retail $270 each)
- (2) Holeshot Modstar, 15"x10", 4x114.3mm/4.5" lug pattern, 5.875" backspace (retail $375 each)

Tire specs:
- (2) Hoosier Quicktime Pro DOT, 28"x13.5" (retail $194 each)
- (2) Kumho Powerstar, 165/80-15 (retail $40 each)

Also included:
- (20) McGuard Racing Lug nuts with washers, M12x1.5 ($17 per 4)

That's a total of $1826 not including the shipping and handling.

I'm asking $1300 plus shipping and paypal fees if chosen payment method

If interested, please email me at abaez005@gmail.com







B seires.. These pistons are brand new and never used. They come with upgraded wrist pins 800++++ hp capable. Also includes upgraded rings as well.

Endyn Roller wave pistons
a. 85mm
b. 9:7.1 compression
c. Upgraded wrist pins
d. Upgraded rings

Looking to get $600 and will take offers












Modified by jdmdc529 at 10:19 PM 8/20/2008

 

Up for Sale Autometer Tach 5'' with shift light used... $50.00

Used Rota Slips Silver 5 lugs for type R suspension 2 wheels only...$140.00(Pending)

Toda C cams for sale...PM me for price... also interested in trade for GSR tranny.

Up for sale also is a brand new set of GRP aluminum rods for LS/B20 motor. PM me for price...


Modified by FRernesto at 5:35 PM 8/21/2008


Modified by FRernesto at 8:48 AM 8/23/2008


Modified by FRernesto at 11:46 AM 8/23/2008


Modified by FRernesto at 6:53 PM 8/29/2008

 

I have the following parts for sale brand new in the boxes, still sealed:

Skunk2 B-series Stage 2 Tuner Series Cams Part Number: Part Number: 305-05-0145 475.00

Skunk2 Tuner Series Cam Gears (Silver) Part Number: 304-05-0200 175.00

Skunk2 Tuner Series Dual Valve Springs B Series Part Number: 311-05-0350 175.00

Skunk2 Titanium Retainers B Series Part Number: 308-05-0300 165.00

Skunk2 Pro Series Hi Comp B-series Valves Standard Size Part Number: 310-05-5320 235.00

*Selling for customer that is going K-series. Prices are bottom line. Will not go any lower. Pm me for questions.

 

Crower Turbo Cams (K series) only 1000miles!
$399!!

B series log manifold, tial 46mm, and DP for EG $1000!!!!

Brand new Red EK carpet- $150

Brand new TN62-1sb - $700

Avid Racing cable billet aluminum cable/hydraulic transmission mount kit (EG, del, integra) - $100 (new)

Avid Racing K series swap mounts for EG - $300 (new)

pix upon request. pm or email jenni@thehorsepowerconnection.com


Modified by MissRSX-S at 1:42 PM 8/22/2008

 

I got a Haltech e6k ecu for sale. it is in excellent condition. comes with ecu, harness, coolant temp sensor, serial cable, 3 bar map sensor, and manual. I also have base maps for honda b18, b16, ka24, sr20, 4g63, and 13b.
This is a full stand alone race ecu. it is in excellent condition.
If interested please call me at 407 334 4885. I am asking $650 and this incudes shipping. I accept paypal.
Thanx, Kelvin

 

+Blitz super sound dual drive blow off valve ($100)
+hks super sequential BOV Type II (universal) ($225)
+Tial wastegates 38mm (silver) ($ 175)
+Wiseco Turbo pistons K541m815 (for B18C ) with total seal ring kit and wrist pins ($375)
+Top 2005 universal programmer (chip programmer)($75)
+S7 Autotechnic gauges (like defi black outs) oil pressure and A/F ratio($60 for both)
+Greddy Full auto turbo timer ($80)
+Apexi VAFC II($200)
+ARP head stud kit #208-4601($125)
+Uber data kit with extra eeprom and quick release holder.($10)
+IB Spec Rods H beam rods balanced and nitride coated contact surface($275)
+P14 (92 prelude automatic) ecu ($50)
+P28 (94 civic 5 speed) ecu ($100)
+Two Ractive Racing seats with rail kit ($ 400)
+Exedy Racing Clutch HM0225R Multi disc ($1,500)
+Cometic head gasket 81.5mm .030 mls #c4232-030 / 147838 ($75)
+Hondata intake manifold gasket ($30)
+27" x 6.5" x 2.5" intercooler ($150)
+Thermo tech wrap (black #11021 1" x 50') ($50)
+hondata s300 ($500)
+greddy oil catch can 15mm fittings ($50)
+two aem tru time adjustable cam gears 323-802b ($ 225 for both)
+Fluidamper #590601 Street ($325)
+GM 3 bar map #1997152 w/ pigtail ($40)
+GM Boost sensor 12223861 w/ pigtail (from the typhoon) ($25)
+RC pl4-1000cc injectors w/ fuel pressure gauge ($300)
+moroso drag sumped oil pan with pick up ($125)
+Drag 2 1/2" down pipe ($50)
+nology hotwirz & msd wires ($50)
+B series 94 civic intercooler kit (pipes and silcon) ($100)
+wastegate elbow 2 bolt ($40)
+1" dump tube ($ 25)
+drive shaft shop level 0 axels b series to 5th gen civic rated for 300hp w/ intermdeiate drive shaft ($200)
+bag of honda/acura wire harness plugs (some where around 50+) ($50)
+RC 550cc injectors ($275)
+Zietronics zt2 wide band o2 sensor kit ($200)
+proform shift light ($25)
+golden eagel vaccum manifold (blue) ($30)
+2 gauge pod for honda/acura ($10)
+battery box ($ 5)
+turbo smart boost controller (red) ($ 60)
+Tsunami turbo manifold ($250)
+3" down pipe with flex (5 bolt flange) ($200)
+Giant intercooler (havent measured it...takes up whole front of civic) ($125)
+shifter linkage for 5th gen civic to B series w/ short throw shifter with type r **** and energy suspension bushings ($125)
+B18C JDM Type R freshly sleeved with ductile iron 81.5mm sleeves, hot tanked (block is not assembled...everything is tagged and bagged and wrapped with oil soaked rags) its a complete engine minus the pistons and rods. It

comes with a brand new rebuild gasket kit and crap load of bearings to get the clearances just right, all accesories like starter, altenator, wiring harness ext. The head has a mild port and polish with omni power titanium

valves, ferrera titanium springs and retainers. ($3,500)


If your interested email me at vernon_brandon@hotmail.com...I dont come on here much at all anymore, just dont have the time.

 

<FONT COLOR="blue">The 2nd one is a 95 Integra RS. Built for SFWD/Turbo Street. Car has been aligned and corner balanced. Weight in at 2380 without driver. Car idles and has a base map in it. Still needs a final tune. CAR HAS ONLY BEEN IDLED. NEVER BEEN DRIVEN OR TESTED SO THE MOTOR IS FRESH! Everything on the car is brand brand new and has never seen track time or daylight for that matter. Title is clean and in hand. Here is the list of mods on this one.</FONT>

Engine:

Darton Sleeved 84mm GSR
Micropolished GSR Crank
CP 84 9.0:1 Pistons with upgraded wrist pins
Manley Turbo Tuff Rods
ACL Race Bearings

Headwork done by T1 & Trevor Johnson Racing Heads in Texas
Skunk2 Pro-Series Valve Springs
Skunk2 Retainers
Skunk2 Stock Size Valves
Skunk2 Pro 2+ Cams
Skunk2 Intake Cam gear
Golden Eagle/T1 Exhaust gear
Edelbrock Intake Manifold
BDL 70mm TB
3" Intercooler Piping
Tial BOV Black 9psi
Peakboost HVS Topmount Manifold
Peakboost downpipe
GT4294R 1.02/ar Turbo
Tial 60mm w/g black
RC 1600cc injectors
BDL Fuel Rail
Aeromotive Fuel Pressure Regulator
Fluidyne Radiator
T1 Cam trigger kit
T1 Catch can
Custom 4" exhaust with Vibrant Race Muffler
Catch pan

Transmission:

Heat treated gears, Liberty Cuff, Quaife LSD, Exedy Twin Plate Clutch, Skunk2 Short Shifter, Golden Eagle Scattershield


Fuel System:
Sumped fuel tank with -12 out
Aeromotive Pro Filter -12
Aeromotive A1000 Fuel Pump
Aeromotive Fuel Filter -10
-10 line all the way up and -6an return

Suspension:
Innovative Billet Mounts 95a Inserts
Skunk2 PRO-C Coilovers with Drag spring rates
Skunk2 Pro-Series Front Camber Kit
Skunk2 Pro-Series Rear Camber Kit
Skunk2 Rear lower control arms
Avid Racing Pro-Series Traction Bar
Weld Racing Magnum 13x8 5" backspace w/ Mickey Thompson 24.5x9x13 slicks ( BRAND NEW)
Weld Racing Magnum 15x3.5 skinnies w/Mickey Thompson 22.5x4.5x15 (BRAND NEW)
Stroud Parachute

Interior & Electronics:

Corbeau Racing Seats
Simpson Racing Harness (Jan 08)
Sparco Flash 5 Steering wheel with quick release hub
Mazworx 9sec cage with window net

Autometer Shift Light
Autometer Digital Pro shift system
NLR 500 Boost Controller
AEM EMS
M&W PRO 10 Igntiion w/T1 Harness
AEM Oil Pressure Gauge


Asking $20,000 OBO

 

It will come out of my car and just drop it in yours. Motor is running. come by and do leakdown test and compression test. Motor only has 200 miles on it. I live in Hartford County in Connecticut. I rather not ship the motor cause its heavy. I can deliver in surrounding areas or meet someone in a good distance. Please Make me an offer. I know how much money I have in this motor. It will come with machine shop receipt.

B20 85MM Darton Sleeves Block
Water Pump
Oil pump
ARP Main Studs
CP 9:0:1 Pistons
Manley rods
ARP Head Studs
Greddy Timing belt
Fluidampr
P72 Head (port & polish)
5 Angel Valve Job
Crower Valvetrain
1mm Oversize Valves
CTR Cams
Hayme Cam Gears
JG Edelbrock manifold
RS Machine 74mm TB

 

LOCATION FRESNO CALIFORNIA
92 si frame

-fiber glass
*MB sun roof
*MB doors
*MB front end
*franks customFAB back latch
*MB cage
*MB rear axle
*MB custom steering column w/momo steering wheel (quick release)
*staging e*break
*custom dash
*lexan windows all around
*ss brake lines
*kyb shocks w/ weapon R coil over
*1 gal fuel cell
*aeromotive a1000 pump
*aeromotive fuel filter
*AEM universal fuel pressure regulator
car is set up for k series
*circuit works 36mm hubs
*innovated steel mounts
*type s shifter box
*type s cables

*bogarts dragon fly
13x8
4x100
front:
MT 24.5/8
back:
MH 3.5/22/15
ASKING: 5000.00

*heres a old picture of the race car

**Carson Standard Car Hauler


GVW: 7000#
Jack: 2000#
Frame: 3 x 5 x _ Angle
Tongue: 4” Channel Wrap-Around Tongue
Brakes: 10” Electric (1 axle)
Ramps &
Storage: Standard
Floor: Elevated Floor, 4’ Dove Tail
Tires: Bias Ply 205-75R15

ASKING 1500.00