Precission t3 57 trim 60ar with cast manifold,2.5 downpipe with flex pipe, 550cc injectors rc, revhard fmic, turbosmart wastegate, external dump tube, all charge pipes, vortech bov, oil lines, and a hondata s200. its coming off a b16. In are 00 civic si full interior we ran 11.87 @ 119mph. and made 338whp at 256flbs. the whole setup has maybe 500 miles on it. It was just a track car for pictures and video of it running call me at 630 981 4185 my name is mick price is 1800 but for 2000 will throw in greddy spec 2 electronic boost controller

 

Selling my Hondata S200 w/ P28 ECU. It comes with a few extras also. Going to the highest bidder: http://cgi.ebay.com/ebaymotors...58103

 

Sorry if i missed some of you PM's I went out of town for awhile
Block is a 2000 B16 with AEBS sleeves comes with main caps stock bore -$600+shipping
Everything is good with the block.... has a little surface rust

 

Located in Phoenix, AZ

Will ship at buyers expense!

Selling the following:

APex'i AFC Neo
Brand new in Box $200 OBO



AEM Twinspark ignition box
Brand new in box (has warranty, etc) New edition $250



AEM EPM
Brand new in Box $250


AEM Pencil Coils (short)
Brand new in Box $100


1600 CC fuel injectors
Brand new never used $225


AEM 1050U ECU
inclues uego wideband
Setup for Hall sensor/ EPM
used for 1 dyno session $800




B16a Eagle rods
Brand new in box $225


Supertech B series Valve springs/retainers
Brand new $275 OBO



Competion Clutch B series Twin disc
Brand new $1100 OBO


Weld/M&H wheel package
Used weld wheels 13x8 4x100/4x114.3
Used M&H 25x9x13 slicks
$500 OBO



Garrett Gt35r .82ar Turbo housing
brand new 3" discharge $125

 

BNIB MFactory 4.05 final drive for B16A2 fitment (NOT Pro series) just received bought through McKinneyRaceWorks. Box was only opened to confirm parts correctness and quality. Pictures can be provided at request. Selling because I just went in another direction with my gearing selection. Price is $425 shipped domestic US. No international shipping. Paypal payment preferred.

-DF


Modified by DSF at 8:46 PM 8/10/2008

 

15" Bogart Fly Stars 4.5" back spacing 4x100
Selling 2 or 3 wheels. 1 Brand new in the box still. 2 have had tires mounted, and have been mounted on the car, but never made a pass with them so still very new. I paid $660 new.
PM for details
$450(for 2) That is $210 less than what i paid from Bogart!

26 x 10.5 -15" M & H Racemaster Cheater slicks
Brand New, no passes, no burnouts. Mounted on above wheels, will dismount when either sell
$250


Modified by 2 0 3 at 11:44 PM 8/6/2008

 

all prices do not include shipping. parts located near eugene oregon

1000cc injectors used for 2 seasons 225

B16/type r victor-x IM drilled and tapped for direct port used for dyno and under 10 passes. And ZEX direct port kit, nozzles installed etc, never been used, just installed. kit also comes with purge kit, bottle heater, blow down tube. looking for 700







B16a2 forged internals motor, unassembled. B16a2 block, balanced, champhered, polished B16a crank, manley turbo tuff rods, arias flat top 81mm pistons with upgraded wrist pins, oem oil pump, water pump, timing belt, tensioner, b20 breather nipples etc. all oem and aftermarket parts were new last winter, and have dyno time and under 10 passes on them. also have brand new arias 81mm rings, acl thrust bearings. am waiting on new rod and main bearings to arrive. will include all even if i have to ship the bearings later (they are on backorder). also will include ARP headstuds and main studs, purchased and used the same as all other parts. 1600 unassembled

have pics of the top of each individual piston as well.









pwr 4x8 barrel intercooler used 3 seasons ago for 1 season, worked great on my 400+ whp car. has been modified for 3" piping outlet. pics this weekend 300

Custom built T3 forward facing turbo mani and 4" DP for B series 38mm wg flanged 400

 

want to sell my sfwd 1999 integra gsr.the car has a custom 12 point chromoly cage that is tig welded.the cage goes thrue the fire wall and ties into the shock tower.it was constucted of 1 5/8"this is a very strong cage and well built.it comes with a custom stock gas tank that is sumped with
-08 fitting.the gas tank was cut in half and a plate welded in between.then pressure tested at a local radiator shop.comes with stock suspension.i will throw in the gages and the momo seat.the sunroof has been modified will some aluminum brackets that hold the glass in place there is no track for the sunroof.the dash has been completly gutted.the car does come with complete interior minus carpet.the body is in excelent shape.it does not come with fuel pumpor fuel filter.i am willing to deliver up to 100 miles.if you would like more pics let me know.i have tons of them.asking $2500.00 obo must see to appreciate






for sale waterman cam drive fuel pump sprint 500 brand new w/pressure valve
$600.00 obo

for sale is a new stage 1 prodrive/circuitworx setup.the spool was installed but never used comes with speedo drive.the hubs have new bearings.$1400.00 firm


for sale is a set of swayaway threaded coilover shocks.they are nitrogen filled comes with 1000 lb springs on rears and 350 lb on front.$600.00

new phantom grip hand cuff pn pgtmc $150.00
1 new rc 1600cc injector 50.00
1 slightly used rc 1600cc injector 35.00

 

!!!Garage Sale!!!

If interested in anything please contact me via PM. Thank you!

94-01 Integra passenger side SRS airbag. Came out of a 95' GSR. Black face cover. $100.00




Ferrea Roller Followers $700.00




Crane cams roller camshafts (Turbo grind) $500.00



Circuit Worx Final drive 4.72, only 5 passes on it, like new! $600.00




B series intermediate shaft 99 CRV $50.00



Skunk2 dual valve springs $125.00
Skunk2 titanium retainers $125.00



CBR ignition coils with wire harness (for coil on plug ignition system, distributorless) $75.00




GM boost controller solenoid with wire harness $30.00



AEM 3.5bar (50psi) MAP sensor with wire harness $100.00



95 GSR intake manifold air temperature sensor $20.00



95 GSR coolant temperature sensor $20.00



B series starter $75.00



Hondata heatshield intake manifold gasket $50.00




Mr Gasket copper exhaust manifold gasket B-series head $30.00



Simpson Platinum 5 pt harness (dated March 07) $75.00




Bieffe predator helmet size medium (SA2000 safety rating) - $225.00
shield has been mirror tinted. Few small nicks that have been touched up.





[B]Sparco 5 firesuit, size euro 54, color white/blue trim, SFI 3-2A/5 rated - $445.00
link to Sparco sizing chart http://sparcousa.com/resourceFiles/29.pdf[/B]





Sparco Top 2 race shoes, size euro 43 (US 9.5-10), color black- $125.00




[B]Sparco GP2 race gloves, size euro 9 small, color black/grey- $65.00
Sparco sizing chart link http://sparcousa.com/resourceFiles/17.pdf[/B]



Modified by msmotorsports at 9:39 PM 8/6/2008


Modified by msmotorsports at 5:28 PM 8/8/2008


Modified by msmotorsports at 10:35 AM 8/13/2008

 

So I'm parting out my turbo ITR coupe... here goes nothing.

Apexi AVC-R boost controller, wired up but never connected to vacuum - $280

99-00 Si gauge cluster, mint with 71k miles - $250

AutoMeter Ultra-Lite boost and electrical oil pressure gauges - $60

98 ITR complete head, freshly hot-tanked and resurfaced - $950

Golden Eagle LS/VTEC conversion, complete with -3 AN fitting and new OEM HG - $200

AEBS headstuds for GSR or LS/VTEC, brand new in the box - $100

98 USDM ITR LSD tranny, 119k miles, original VIN attached - no grinds - $700

98 USDM ITR flywheel inspection cover, rare - $100

98 USDM ITR shift linkage, with OEM ITR shifter - $100

1997 Civic EX 5-speed engine harness, only missing CFK sensor - $100

98 USDM ITR distributor, only 10k on cap, rotor and OEM plug wires - $150

98 USDM ITR axles, original OEM pieces - $100

98 USDM ITR intermediate shaft, mint - $50

98 USDM ITR complete legit shortblock, 119k, matching VIN, cracked sleeve in # 3 cylinder - $400

99-00 Civic Si OEM mounts, all five in mint condition - $100

Competition Clutch Stage 4 pressure plate, with ACT 6-puck unsprung disc and brand new Nachi throwout bearing - $250

Exedy Stage 2 Cerametallic clutch disc and pressure plate - $100

98 USDM ITR flywheel, freshly resurfaced 1,100 miles ago by Headwerks - $100

OEM GSR oil pump (10k miles on it), timing belt, tensioner, tensioner bolt and spring - $100

Jay Thornton ramhorn manifold, 1,700 miles on it, 0 miles since ceramic-coated by New Image Coatings just last month - $600

Garrett GT3255E turbo, 1,100 miles on it and ceramic-coated and custom-built by Speedtrapp Motorsports - $600

3" stainless steel downpipe, with flex section and 2 o2 bungs - $250

3" Magnaflow high-flow cat, Kteller piping, 18" resonator and Magnaflow SS muffler - $350

Tial 35mm WG, 4 lb. yellow spring - $100

Full-Blown Motorsports custom side-exit dumptube (out the front bumper) - $60

Full-Blown welded GSR oil pan and oil return line - $80

Stealthmode oil feed line kit, with firewall relocation kit - $60

Spoolin' Performance polished aluminum intercooler piping - $150

HKS SSQV polished blow-off valve, 1,100 miles - $100

DRAG III front-mount intercooler (450whp capable) - $150

Chipped P28 ECU with Boomslang OBD2A-OBD1 conversion harness - $150

GO FAST FOR ME, FELLAS!!!

 

Liberty Straight cut Dog engagement H22 (Euro R) transmission with 4.78 final drive. $2500

Tilton Twin Disc H22 Clutch set. $850

H23 RS sleeved Block with 98mm Stroker crank, Custom Aluminum Long rods, Custom Arias 16.5:1 coated pistons with buttons. All brand new Honda Bearings, Unassembled new parts, $3000

Skunk2 H22/Bseries pro series Springs and retainers $300

Golden Eagle Sheet metal Intake Manifold $450

H22 Ported Head (Ported by well known porter) PM for details. $650

ACT Heavy Duty pressure plate with 6 puck disc and ACT prolite flywheel $300

 

2000 JDM b20b block, custom sleeved by golden eagle 85mm. Never used still wrapped up, the block is bare and is ready for all motor or turbo setup email me for more info at JDMintegr@yahoo.com or call me 8182567712. Serious Bidders only asking $1000 obo. Also tell me your Zip code so i can find out shipping prices. thanks

 

DC/EG Traction bars $225 shipped
Competition Clutch Stage 5 - Strip Series 1420 Clutch Kit (20 passes) $200 shipped
RC 370 Saturated Injectors (less than 100 miles) $200 shipped

 

Golden eagle b18a 85 mm block has 3000 miles on it $OBO
cp pistons 9.1
Eagle rods
b18a crank


Modified by LSR-Abuser at 10:17 PM 8/10/2008

 

Autometer Ultimate $200 here's a link on regular cost http://www.statracing.com/buy/...4.asp


https://honda-tech.com/zerothread?id=2341841

 

DEFI tach, boost, fuel pressure, oil pressure and exhaust temp gauges with link control box.. Comes with all sensors and all wiring. 650 obo shipped usps priority with tracking number.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sicsixone &raquo;</TD></TR><TR><TD CLASS="quote">
for sale waterman cam drive fuel pump sprint 500 brand new w/pressure valve
$600.00 obo

</TD></TR></TABLE>

try too contract you soo many time but no answer.
do you still want to sell it? thanks

 

I have the following for sale:

- Aeromotive A1000 fuel pump $ 195.00 OBO
- RC 1000cc injectors bosh style $ 330.00 OBO (New in a box)
- AEM H22A Cam gears (Blue) $ 150.00 OBO (New)
- Autometer Phantom Monster Tach w/shift light $95.00 OBO (New in a box)
- Autometer Phantom water temp and oil temp $ 40.00 OBO (New in a box)
- GSR front brake calipers and rotors $150.00 OBO

PM me if you have any questions, thanks.

 

- MSD boost controller (msd#7562) new $250.00
- SDS ems(used) includes every thing but magnets for crank pulley. call for more info if interested. $400.
- YS1 trans with 2000 civic si 1,2,3, and gsr 4th with Pro Drive 4.7 final drive, Rob Moore Spool and 5th gear cuff. No Grinds trans is in very good shape. $800 obo
- Turbo Smart Mega Sonic Blow off valve. $100.00
- 1 gallon fuel cell. $$50.00
- YS1 trans case (3) $100.00 each
- Moroso Billet Breather ( part # 85500) $75.00
- Moroso oil /air separator (part# 85471) $65.00
- Rev Hard tubular turbo manifold with jet hot coating. $400.00
- Rayne Technology front drop spindles for 94-00 int or 92-95 civic (knuckle only no hubs or bearing) $300.00 for both

Prices do not include shipping or pay-pal ****** WILLING TO NEGOTIATE PRICES*********

I have Pictures of all items listed
to reach me via e-mail during the day please use - waoservice@kendixon.com

Thanks

 

I have a set of Brand new Lenso VPD and XPD-R Skinnies, i only open boxes for pictures I dont need them nomore, dont have a car to put them on anymore, I dont really wanna seperate them. Here are pics of the rims, Picked up and shipping available. Fronts are 13x7.5 rears 15x3.5 askin $600$ + shipping

 

I have a few good parts for sale.

New never used 50mm TWM K20 ITB with fuel rail and tps: $ 900






Golden Eagle B-series Cam Gears 1 red and 1 blue brand new: $75 each



Odyssey PC 625 battery and charger: $100



Please IM if interested

 

all parts are located in houston texas, buyer pays shipping....
call for info if needed.....281 736 7889 ricky
i wrecked my dodge charger and now i need to buy another car asap...didnt have insurance so that doesnt help either.......
PLEASE CALL SINCE I DONT GET ON MUCH....

lenso rims and slicks , about 10 passes,13x7 and 24.5x8x13...$450

ctr tranny with 4.78 final drive, podrive spool, circut worx speed sensor ring gear, will throw in shift linkage...no grinds $1200 OBO

competition clutch twin disk with about 5 dyno pulls, no track time..$950

complete fuel system..2 gallon jaz fuel cell with roll over vent, aeromotive a100 fuel pump, aeromotive fpr, fp guage, skunk2 composite fuel rail, all earls fittings and steel braided lines....uses -10an for feed and -8an for return...$650 OBO

complete b16 longblock...81.5bore 9:1 compression supertech pistons, eagle rods, golden eagle block guard, mirco polished and balanced crank, new water pump and oil pump(westside performance did all work), port and polished head, supertech 1mm oversized valves (flat) supertech valvetrain, ctr cams, skunk2 cam gears, 0bd1 dist, alt, ngk power plus wires, all new honda bearings and gaskets...$2000OBO...SOLD!

edelbrock (b16) intake manifold with hondata gasket $275 OBO

alum radiator with slim fan...$150

comp engineering traction bars..$175

bdl 72mm trottle body..$250

endyne catch can with all -10 an fitting and steel braided lines..$125

ati dampner (race version)...$300

golden eagle scatter shield...$150

golden eagle vac block...$45

complete turbo kit..full race ram horn manifold, tial (purple) bov, tial 38mm (silver) wastegate, nando fab 3in side exit down pipe, dump tube 3in piping (cold side) 2 1/2 (hot side), all 4ply couplers, tbolt clamps, feed line, return line, 3in intercooler, 3bar map sensor, turbonetics dual bearing t62-1 turbo, p28 with basemap for start up.....$2700

rolling race car shell....92 honda hatchback, all new lexan windows, 8pt cage, parachute mount, cnc staging brake, ken kustoms brake master cylinder, all new custom steel braided lines, kirkey alum racing seat, fuse panel, automete silver guages (water temp, oil press., volts, boost, rpm tach) fiber glass one piece front end, 1k rear progressive springs, kyb 5way adjustable, skunk2 coil over for front, omni front camber kit, d2 camber kit for rear, fresh paint from gbc customs....$3000

 

i have a 99 itr head ported by portflow that i made 723 on 34 ppunds... used on my race car for 1 dyno session and 4 track events still in great shape.. comes port flow springs and retainers, supertech valves no cames unless u want some gsr's i can thow in there .. cost me 1500 for port work,springs,retainers,vavles...

only asking 1500

 

up for sale is R_CREW header that was modified to have good ground clearance with a k20/k24 swap. this is the og version R_CREW. this is ready to work for anyone going from a k20a2 swap in a eg or dc to a k20/k24 set up might also clear ek's but im not 100% sure. i was gonna use this header on my other k swap civic but i had to sell it cause of some issues that came up. so now i have no need for this.

when i went from my k20a2 swap to my k20/k24 set up my header pointed down and had poor ground clearance, so i took the car to a respected muffler shop in my area to get the header modified so it be a better fit. the header does not have a flange so you will have to add one or get it welded up to your piping like i had it.

 

Neptune RTP with bluetooth module. $425 OBO shipped via USPS Priority mail.