FCS fuel cell. Brand new never used. Comes with straps and mounting hardware. 375 obo. Call or text 203-479-2274

 

call or email bonillaalban@yahoo.com 646-696-1055

K24A2 BLOCK(YOSOLO BUILT) 2700
-88MM 13.7.1
-CARILLO RODS
-ACL RACE BEARINGS
- BRAND NEW HONDA RSX PUMP

K20Z1 HEAD (BARE RIGHT NOW) 1100
-TG PORT AND POLISHED
-BLACK NITRATE FLAT VALVES

-K20Z1 TRANSMISSION(NO GRINDS) 700

-BOGART SKINNIES (350)

-EP3 WHEELS ON M&H 235/60/15 150

-CUSTOM INTAKE FOR EG WITH RBC TO COME OUT THE FRONT BUMPER

-MISHIMITO RADIATOR CUT TO BE MOUNTED IN FRONT OF THE RBC 150

-EXEDY SINGLE HYPER CLUTCH ALOT OF MEAT LEFT 600

-AEM WIDEBAND UEGO 100

-TEMP GAUGE 50

-V2 WHEELS 24.5X13X9 sold

 

K-pro Pnd computer $950 obo
4 msd blasters with a custom bracket that bolts on the valve cover, Msd Dis4 box, igniters, 2 sets of msd K-series ignition wires $800obo

 

I have a brand new in the factory box K20 (RBC-1) Cylinder Head. Bare Head with Cam Carrier.

Make offer.

Thanks

 

FS: Edelbrock Victor X for a GSR head ported by cccylinderheads. Only 12 passes on it. $700 shipped and paypal'd in the lower 48. Port alone was $500. Price will be lowered if you decide to come and pick it up.













Comes with a free tb gasket and the original hardware kit.

 

L19 B- SERIES HEADSTUDS.... MINT.... torqued 1 time 275$ shipped

 

Built GSR short block for boost (stock sleeve, piston/rod setup)

check thread for info/pics

http://www.hondamarketplace.com/show...8#post45102728

 

http://www.ipgparts.net/store/1992-H...-Roll-Bar.html

email -- James@IPGParts.com
phone -- 407-324-4684

$1999 Takes It !!!!!

1992 Honda Civic VX Rolling Chassis For Sale.

This is the lightest EG chassis that Honda made.

Clean Title in Hand

Setup for a K Series Engine

Black Interior
6 Point Roll Bar
Ground Control Coilovers (stock shocks)
Del Sol Seats
5 Point Harness
Power Windows
Omni Rear LCA's
Spoon Style Mirrors
CF Hood Painted Red
Spoon Style Duckbill Rear Spoiler
Relocated Battery to passenger side front bumper
will be on Steel wheels as pictured

This is a great chassis to use for a project build. It has had many variations of engines in it throughout the years and has always worked very well. Has basically been used for drag racing during its life but will work well in whatever form of motorsports you want to use it in.

Great chance to get a nice project car at a very small price.

We pulled the complete powertrain and are installing it in a new chassis.

Things this car is missing:
engine wiring / ems wiring
fuel pump
fuel lines
oem transmission mount bracket (was cutoff for the k series engine installation)
....more since it is just a rolling chassis

Here is more pictures and information on it as we updated during our ownership of the car -- http://www.ipgparts.net/blog/categor...urbo-k-series/

 

SOLD

 

plx m300 asking 175 shipped plus pp fees pm for more info. Thanks.

 

*****Call Darrell for details, do not PM, 410-365-2384*****

JoJo EK 3-piece front end. Painted Super White, PW7 paint code with factory Honda grill. $1,300 obo.

 

Name: Coffey
Location: Chesapeake
Means of contact: 757-544-1184
Price: $5500 obo

Description:
Black 1999 Civic Si Drag Car Shell
10 point Ken's Custom Cage
Parachute Mount
Comes with RLZ Head and Pretty Much all my race stuff left I havent sold.

Tex me or call for information

 

Parts for sale:

S2 GSR manifold($175)

89-95 Blox Drag Suspension(This is installed on a car that never moved, bought about 5 months ago) I will let go for $650 plus stock suspension.

GSR stock tranny mount($25)

b-series axles-$75

PR3 ECU reprogrammed by Ericks Racing($100)

Full Race EF traction bars NIB-$325 still in box unopened

all prices are without shipping.

add 3% paypal fees

pics available upon requestened from full race!!!!!

race ready EF chassis with clean title-$200....NEED GONE, like YESTERDAY...comes with guages(oil, water, volts, fuel) mounted, stock harness(Si), momo seat and steering wheel, lexan windows, and bracket for fuel cell.

 

Precision 600HP Intercooler (dent on one side but does not leak after repair) - $180obo



HKS SSQV Blow Off Valve - $150



FJO Injector Driver - $150



Prices are shipped.

 

parts for sale
custom t4 44mm flange ram horn sold
Accufab 90mm throttle boddy no tps $180obo great condition


AEM COIL ON PLUG SET UP...keeping it

 

twm 50mm h22 itbs, these are just laying around need to sell 900 obo
crane cam h22 all motor cams and roller rockers. 1200 obo
ef avid cable to hydro solid mounts used for one race 250.
obd 1 coil on plug aem ecu 750 obo.

plus are plus shipping and pay pal fees

 

Have a set of 92-95 civic spindles smoothed out with DSS 3.9 Hubs and extended studs in them. Brand new wheel bearings and ball joints one season on the wheel bearings and ball joints. Not a street driven car

SPINDLES SOLD!!!



3" vband down pipe with muffler for top mount manifold
Down pipe sold

AFI Aluminum intake pipe off 92/95 civic
50.00

GSR Cams/gears
100.00

MR Gasket overflow ordered from summit for 80.00 they said it was stainless but it was actually aluminum chrome plated. Ill take 25.00 for it
There is jb weld on it that you can see picture i tried to glue a mounting tab temporarily for a show


Does not include shipping or paypal fees

 

FS: BMC Race Pro Modular Intake Manifold
-used for 12 dyno pulls but is too much volume for my stock block build. For any B series head

http://www.bmcrace.com/honda-acura-b...h3cechsa43mqm4




Asking $650obo shipped UPS
Or trade for GSR PerformerX plus cash

 

They were used for about 5-6 passes. M&H 22x8x13 $225.00 shipped

 

I have 3 rare P8R jdm b20b head for sale. These head have the same flow characteristics, same size valves "intake and exhaust" as Vtec heads. It also have 84mm combustion chamber unlike the p75 heads that are only 81mm in size. All heads comes with cams and all the valvetrains and valve covers. Price for each head $200 plus shipping Sold as is.

P8R 7 head






P8R 11 head



P8R 12 head

 

Hasport Motor mount for Ef Civic
http://cgi.ebay.com/ebaymotors/Ef-Ci...item2a101b50fc

 

jdm air box for a DA
http://cgi.ebay.com/ebaymotors/Integ...item2a101b63be

 

H series ppg dogbox complete w new casing and Mfactory LSD 5000
Dss 5.9s w hubs for h22/eg 1000
F20b (h22) aebs block, je, pauter, complete still running. 2500
H22 head complet portwork. Ferrea roller rocker components, 6000 series valvtrain and bmc intake manifold 3500
94 eg rolling chassis ( d2/cusco suspension, all bushings replaced, chute, and custom wing, traction bar and splitter/catchpan) 3500 w out wheels 4500 w wheels
Spec hseries carbon/carbon clutch 15lbs total weight. 2500
Aem 1020 box 650
Racepak w aem datalink wire 900
Complete front mount 1000hp turbo kit.(s372r -4boost lines, mvr 44mm wastegates,and 1000hp Garrett core, vbands all around. 2500
Pic will be upon request lmk

 

D series spoolin performance ram horn t3/38mm, ceramic coated
D series comp stg 4 clutch package, bnib
D series bisi 3.6 cam, never ran

Selling off our d series stuff..

 

Heres a bunch of stuff i have that needs gone everything listed is O.B.O
Text 316-299-9469

RC310 Injectors $150
http://img200.imageshack.us/i/img0245uo.jpg/

Resistor Box $35
http://img849.imageshack.us/i/img0255x.jpg/

Blox Velocity stack flter $35
http://img20.imageshack.us/i/img0247ne.jpg/

APEXi Muffler kinda beat up but can be welded $100
http://img856.imageshack.us/i/img0248hn
http://img546.imageshack.us/i/img0249m.jpg/

OG Iceman Headlight Scoop $200
http://img19.imageshack.us/i/img0254ne.jpg/

RCI 5pt Cam Lock Harness $125
http://img801.imageshack.us/i/img0256ou.jpg/