i got a brand new AMS 1000 it has everything you need. never used it comes with everything you need to install it.

AMS 1000 boost controller $750 OBO

brand new 1600cc injectors never used at all. make offer

used MSD digital disc-4. works perfect. make offer

call or text at anytime (954)-638-4102

 

-K24 Manley turbo tuff rods with big bolts $600
-K24 Wiseco 10:1 pistons with upgraded wrist pins $500
(Both pistons and rods for $900. Will have pics when they come out of my motor.)

-6" race muffler $60


-K20 head $1300(head needs milled but the valvetrain and cams are in great shape)
supertech full valvetrain($500). Stainless Nitride coated intake valves. Inconel exhaust valves. All standard size. Seats from supertech as well. Ep3 cut rockers for single lobe and Drag Cartel drop in cams cut to single lobe($1000).

-Polished K series scatter shield $150


-K24 crank $150

Hybrid K series Solid Mounts for EK brand new $450

 

Name: Ben
Location: Northern Va
Means of Contact: through this thread or pm.
Or for those who know me shoot me a text.
Hey guys, the time has come to part the project and move on to bigger and better things.

I'm willing to ship at buyers expense and nothing includes paypal fees. Most prices are firm.
some parts I do not have pictures of but i will get as soon as I start pulling the car apart for him.




Complete Motor setup. Not looking to seperate longblock at this point but maybe later.
Motor is already together and will be sold with spec sheet from assembly.
Motor completely assembled by Chris Treblic(T4EG)
Never started/turned over/ran nothing. completely virgin motor.
$2200
LS/Vtec 81.5mm stock sleeves
Gsr head/lsblock
Je Pistons 9.5:1 comp
Eagle Rods
Acl bearings
ARP headstuds
Supertech valvetrain
InlinePro lsv kit
Type-R intake cam Gsr exh.
Buddy club cam gears
new oem timing belt
new oem water pump
new oem oil pump



Golden Eagle Intake manifold seperate $450


Avid Racing Solid Mounts:For eg/dc $300
new, installed and taken off soon after. never used though.




Inline Pro 1000'cc inj. $250


GSR Non lsd trans: $400 pending


Tilton Twin Disc setup: $900obo
Comes with hydraulic throw out bearing setup and tilton clutch master cylinder with lines.pics of each disc to show how much life is left.











If anybody has any questions please feel free to ask me in a pm.
Sold Items
-------------------------
Fluidamper race damper: $sold
Innovative Wideband $sold
Blox polished lower control arms:$sold
Blox 76mm tb w/ hondata 4 bar $sold
Golden Eagle Vaccum block: sold
Mishimoto Radiator with slim fan: $sold
Skunk 2 Fuel Rail:$sold
Turbo Kit $sold!!
Inline Pro T4 stainless manifold
Full Race spec T67HO turbo(coated exhaust housing)
Tial 50 Bov
Tial 44 wastegate
aluminum intercooler piping 3" cold/2.5" hot side
Precision 750hp intercooler
down pipe starts at 3" goes to 4.5 or 5" cant remember. its big though
dump tube
oil feed and return line
Bogart 5 stars 13x8 & 24.5 M&T ET Slicks.comes with lugs needed $sold
both have slight groove from rubbing on fender. 1 worse than other but both still tons of life left.

 

wilwood civic brake kit. COMPLETE. asking 650 BNIB


m&w plug and play harness. asking 500 USED



k20 cp pistons 9.0:1 86mm with carrillo a-beams. asking 1000 BNIB




ferrea dual springs and seats. taking offers USED


k20 t3 log manifold 38mm wastegate. asking 200 BNIB



b-series coils from 600cc motorcycle. comes with all the hardware to install. asking $100 for all 4!! BNIB


K-Series ID100s with all installation hardware. asking $400 BNIB


GTX4202 Dual Ball Bearing, Billet 11 blade wheel. Clipped to 72.5mm to pass Outlaw class inspections. Has 1.44 A/R. Cold side is powder coated black and the hot side is ceramic coated. Turbo made 1100 hp and only has 50 passes on it asking $1800 USED




5 Weldon Fuel Filters. asking $85 Each BNIB



EG/DC Avid K Swap Solid Mounts. All hardware included. asking $450 BNIB

 

2000 Hotrod civic
-Rob Moore Nito drivline
-83mm Dart block
-gsr fully built head
-twin clutch masters race clutch
-liquid to air innercooler
-28x10 toyos
Car made 900hp on a fresh build dyno time only please pm me for more info
ASKING 15,000 Turn key
also can include a Pace gt 20ft inclosed trailer for 20k
503 559 2578 ask for tom THANKS FOR LOOKING

 

MSD Digital 7 ignition (part# 75314), HVC 2 coil, Noise capacitor, and all necessary wiring harnesses.....$750 shipped.




Email tsraaron@gmail.com for more info.

 

Turbo Smart 45mm Pro Gate Waste Gate
$200 Shipped

 

Z10 Traction Bar EK\EG\DC- $200

BNIB revhard turbokit minus turbo-$1200

Full-race T3 ramhorn turbokit minus turbo and downpipe-$1200

Custom Synapse front mount turbokit T4 Divided with twin mvs wastegates, 35r 1.06 divided.-$3000

AEBS intake manifold B16-$100

Carillo A beam gsr rods-$300

Crower gsr rods-$200

Manley turbotuff ls rods -sold

CTR pulley -$50

MSD two step module with adj. **** -$50

Apexi vafc- $50

Drag intercooler 22x6.5x2.25-$100

H22a4 aebs sleeved eagle rods, Je pistons Fully balanced
and assmbled. Brand new, never ran-$2000

H22 drag turbo manifold -$75

H22 motor mount for eg chassis -$75

 

I have a few extra.
Includes all hardware.
New. Made in the USA
Will fit any K.
$80 Shipped

 

Brand new NLR ams 1000 boost controller $800


1 ATP cast intercooler end tank. 12x3.5" $40


RC 1000cc injector(used) with new pigtails 14mm rail and head size $200

3.5" vibrant alum v-band assembly new out of package without the oring $50

4" vibrant alum v-band assembly new not opened $60

 

Helping a friend get rid of these. He is going a different direction with his build.

B Series Skunk2 Pro2 Cams.
Very little miles on these.
$450 shipped (obo) SOLD

 

BNIB Exospeed Star 8 13x8 4x100 5" backspace polished. Never been used still brand new in box. 650.00 + shipping.

 

Every thing is best offer!!! Will not refuse any reasonable offers. Best way of contact is on here or text 7065877278.... also love to trade for about anything of use!!!

PRICE DROP.... THIS **** HAS GOT TO GO NOWWW!!!!
Only prices that wont drop are the ones with muliple offers waiting to be paid for but its first come first serve show me the money!!!

AEM big brake kit for prelude or accord 4x115 $50


Threadstone h22 turbo manifold $40


AEM h22 pulleys $20
http://i238.photobucket.com/albums/f...9/DSC00168.jpg

Devils water meth pump $20



90-93 accord half shaft perfect for h series into eg $25 "so you can use gsr axles"


5 sets of h22 stock cams $Best offer


Stock h22 head $150


Car alarm $10



H22 aluminum oil pan with 10an bung welded to it $20


MSD tach driver $20


Ebay fuel pressure reg $10


Aeromotive a100 fuel pump $150


Walbro 255 2 intanke pumps and 1 inline pump $50 each


Lots of aluminum and stainles pipping and couplers from 1 1/2 inch to 4 inch


8 gal. fuel cell $50


h22 arp head studs $50

RC 1000cc and 1200cc injectors $200 a set


H22 Arias 87.5mm 8.5:1 pistons $175



MAKE AN OFFER!!!

 

sold!

 

Full race ramhorn T3 turbo manifold - $590 obo
Full race 3" downpipe slight dent but flows fine O2 sensor not included - $200 obo
Tial 44mm wastegate w/dumptube - $285 obo
AEBS intake manifold SOLD!!!!!
Precision 825 hp intercooler brand new in box - $495 obo
Inline Pro T4 cast iron turbo manifold brand new (not pictured) - $400 obo
Custom 3" exhaust system w/borla muffler (not pictured) - $300 pick up only
Tial BOV brand new in box (purple) (not pictured)- $200 or obo

Any questions email me @ boostedeg@yahoo.com or PM me.

 

Rps Carbon Carbon B sceries Clutch Just freashen 1000$ shipped no paypal fees , 100% like new NO BULL ****

 

All prices are without shipping or paypal fees. Will send pics
please text me with questions or to work a deal.. phone # (909)648-3810

MOTOR::::: Everything is Brand new, Long block had a start-up when built by Bob McCray
H22 900 hp custom build motor
Golden eagle manifold SOLD
skunk2 pro manifold h22 $225
golden eagle fuel rail (Brand New) $100
BoB Mckray ported and polished head
ferrea valves and springs retainers
JE custom 9.5.1 dish pistons
Custom H-beam rods
Darton sleeved block
custom belt pulleys
motor blueprinted and balance by CLU
clevite bearings
Drive oil pump
moroso oil pan
fidanza enlighten flywheel
Scatter shield
brand new starter, alternator
hyper stage 6 clutch
heavy duty pressure plate
$3500 for motor and trans


3 sets of h22 to EG axles (hasport, custom, Driveshop) $175 each or $350 for 3 sets
Lenzo vpd wheels with 24.5 x 9 and skinnies $900
skunk2 pro rear lower control arms. $150
H22 EG Hasport motor mounts- $300
skunk2 70mm throttlebody with 4 bar map sensor (brand New) $300
aeromotive fuel pressure reg $150 brand new still in package
brand new never ran SYNAPSE turbo manifold t3/t4 $600
brand new PRECISION t3/t4 turbo 6765 billet wheel h cover $1000
HONDATA S300 IS SOLD
innovative lm-1 wideband $250
TIAL 44 wastegate $200
1680 cc injectors (bosch) $250 shipped
880 cc precision injectors included $150 shipped
http://i152.photobucket.com/albums/s...isionturbo.jpg
http://i152.photobucket.com/albums/s...sion1turbo.jpg
http://i152.photobucket.com/albums/s...sman/photo.jpg
http://i152.photobucket.com/albums/s...n/4bffeb15.jpg
http://i152.photobucket.com/albums/s...n/0a07ce03.jpg
http://i152.photobucket.com/albums/s...n/IMG_0009.jpg

 

Sup people... I got a couple things im parting out due to me changing my setup and going a different route with the car.All the turbo parts have only been idled on.Has not seen the dyno yet.All these prices do not include shipping..Buyer responible for shipping..Willing to meet if your in the nj/de/md/pa area..

T3/t67 ho. 82.ar..Bought Brand new from Full Race 3 years ago.. $650
Dual Back Door InterCooler..Could Handle up to 700hp.(will get measurments soon)$400
B series PeakBoost Manifold .. $450
Koni/Gc 350/400lb spring... 2500 miles.. Car been sitting for nearly two year why they look so beat up... $ 600

Here are some pics of the kit on the car..

 

For Sale:

Full-Race PRO-AM Traction Bars for EG/DC=250.00 XPD/VPD LENSO 13"/15" x3.5 wheels with M&H Slicks 23x8x13, almost brand new=800.00

B-Series head fully ported by"DPR" with paper work brand new Ferrea valve train=1800.00

Crower B-series turbo stage 2 cams brand new=400.00

Skunk2 cam gears B-series brand new=180.00

 

---All parts are new never used. I have a 109 stroker kit for sale needs to be used with a deck plate and I dont know what size. Consists of a crank redone by castillos 109 mm stroke with Cunningham all motor light weight rods and ross 90 mm pistons with total seal piston rings. $2000









---Arias h22/h23 16.5:1 89mm bore were to be used with a 95mm stroke crank brand new with wrist pins, locks and rings $550




---used type s pistons in good shape with rings with probe h22 rods. Had a spun bearing so I was told the rods need to be resized $350 for both or $175 each




---H22 Arias 87.5 turbo pistons brand new with pins, locks and rings $450


---h23a1 block notched for h2b no rods and pistons only $300










---h22 bare block $150







---h22 stock head with valve train caps and rails $250

 

[QUOTE=Big Teggie;1287458]I accept Paypal and also pickup in Central NJ.
I have many references and vouches H-T, just ask around or I can send you a list.

Contact Info
E-Mail – BigTeggie@gmail.com
PayPal - BigTeggie@gmail.com ADD 3% FEE to listed price if you choose PayPal


Please click on the thumbnails for larger images

RLZ All Motor K24 Short Block
- Assembled by Howard at RLZ
- K24A4 Block and Crank
- AEBS Sleeves
- IPS K24 Cunningham Rods
- RLZ Spec Wiseco Pistons (14.5:1 c/r & 89.5mm bore)
- ACL Race Bearings
- No accessories included
- All parts are brand new, zero miles (the block came out of a wrecked accord with less than 10k)
- I will not part out or disassemble, sorry
- Block at RLZ shop in NC. You can pickup in NC, get it shipped, or pickup in NJ
$3450 + Shipping

 

GSR length, Eagle H beam rods, used for like 3 months, torqued once. 150 + shipping.

 

g-sport hi compression starter-$150

jojo callos crx front end-$550


gt40r turbo used-$650


gt42 brand new turbo-$950

msd digital 7 ignition box-$125


aem ems k-series brand new $1000


b series rcautowerks ramhorn manifold used-$350



ebay h22 turbo manifold-$125


DSS stage 5 axles with hubs and integra spindals-$900


chromoly "wheelie bars" rear traction bar made by ron lummas-$200


b16 tranny w/quafie lsd, and phantom 5th gear elminator cuff-$900


aluminum solid b-series mounts $200

 

i realize this is a crappy cell pic, but when i take it off the block, ill get better pics.

its an obd1 b16 head, and gsr cams. minimally decked once, and then hand lapped after that.
ported, with ferrea valvetrain. valves springs and retainers. iirc its the 100lb springs.

this engine runs fine, but i would have the spring pressures checked some time, as i shifted this engine north of 10.5k all the time.

price is 750+ shipping and paypal fees. firm.
no intake, dizzy, etc. just the head and valvetrain.
package deal.....1000 for head, cams, vic x intake, bored stock throttlebody, vortech rail, and aem 5 bar.
that is 1000 firm + shipping and pay pal. this is a great deal, and if you know what you are looking for you will know.
lowballers, please do not waste my time.

more detailed pics:
http://www.facebook.com/album.php?ai...9&l=1aec2cba88













this is how it looks 2 mins after removing it from the engine. it has not been cleaned.
i have also sourced a set of stock gsr cams to go with this head.

thankyou for looking.

 

Ppg full B-series set 1st- 4th, 4.6 final with Liberty billet case and powder coated outer, modified shift selector assembly. *$8500*