B series Gforce dogbox . In perfect condition recent receive from Gforce for service & still is in the box comes with 3 quarts of the Gforce transmission fluid . New reinforced bell housing . The Newley designed shifter forks. This trans has 5 hits on it last year before the refreshen. Comes with a quaife LSD that was purchased new also. Located in ct 203-278-2806 asking 5000 ratios-2.92-1.88-1.40-1.09-4.0final

 

Full Race T4 Topmount $900 firm



Gsr Victor X intake manifold without the throttle body $200




Alaniz Ported GSR head
New supertech valves
supertech springs and retainers
arp stanless steel exhaust manifold studs
$1100firm









Custom one off catch can kit with all hoses and valve cover
$350obo





3inch ss down pipe for 6265/6266 cea turbos, not sure wut else it can fit
200OBO



Mac Ectune Boost Solenoid
$50



Strange Rear Suspension(eg)
never raced on just installed
750lbs springs
$700firm



Nrg tech steering wheel. $50



Intercooler piping for eg/dc chassis with top Mount manifold. I'm sure it will fit other honda chassis as well. 3inch cold side 2.5 inch hot side with all couplers and clamps. (without BOV) $200



Garrett Intercooler $275



prices do not include shipping
contact me through pm or 903-746-4920(text ok)
for a faster reply text.

 

AFI Turbo B Series Forward Facing Manifold

T4 Single 44mm Undivided

$900 OBO











Matching AFI Intercooler 21x16x4.5

$600 OBO












*PRICES ARE NEGOTIABLE*

Together $1500 Shipped

 

For Sale!


2000 Freightliner FL70, United Specialties Toterhome
129330 miles
Cat 3126B 7.2L, 300HP
Eaton/Fuller 10-sp manual trans.
10K front axle/19.2K rear axle = 29,240 GVWR
Air brakes w/dryer
Dual 45 gal fuel tanks (saddle)
Approx. 30’ overall length
Polished aluminum wheels w/11.00 x 22.5 tires
PowerTech 7KW diesel generator
AC/CC/Inter. Wipers
Dual air-ride seats
AM/FM radio w/CD player
14’ RV area, w/bathroom & shower
Galley w/sink & microwave oven
6-gal gas/electric water heater (elec. ign)
Gas/electric refrig w/freezer compartment
Ducted gas furnace
12V to 120V Inverter
120V 30A Shore power cord
City water hook-up
Approx. 15-gal Propane tank
Fold-out sofa on pass.-side
Fold-down dining table on driver’s side
Over-cab bunk
Wardrobe, drawers and overhead storage
TV set-up for satellite
70-gals of fresh water storage
25 gals sewage, 20 gals gray water
13,500 BTU AC w/strip heat
Fantastic fan in overhead bunk
Large basement storage compartments

This unit is set up to tow goose-neck or tag trailers. It has various trailer 12V electric plugs at the rear. Also has 120V/30A power plug at the rear to supply 120V power to a trailer. Unit is equipped with an electric trailer-brake controller as well as air supply for trailers with air brakes.

$65,000 Truck

$17,000 Trailer

Contact: Matt@speedfactoryracing.net

More pictures can be found here: http://www.speedfactoryracing.net/ne...ies-toterhome/

 

15" Welds with MT 26x10 slicks with good meat left. $1000 shipped. (13's and skinnies SOLD)




1996 EK hatchback with 10 pt. certified cage. Will come with title. **Shell Only**
**FULL BLOWN LOGOS WILL BE PULLED BEFORE SALE**

Hand made 3 piece wide front end. Fenders are metal, bumper is fiberglass. Will also come with carbon fiber hood with aero catch latches.

Car comes as stripped down shell with GC drag launch springs and tokico illumina struts, on steelies.


This is what the car looked like when complete.






This is what is for sale, and will be on steelies. Front end not pictured, but IS included.





Slicks will not be included, but this is how the interior will be for this sale.





$3,000, picked up at the shop. Serious buyers please send PM.



B series T4 manifold, Precision 67mm ball bearing, piping and intercooler. $1500

 

Fastbrakes 10" front 1 piston caliper drag kit for the 1990-2001 Integra. Kit includes the Wilwood 2 piston calipers with brackets, slotted & drilled 10" rotors, performance brake pads, and front braided steel brake lines. This kit is designed to fit 13" drag wheels. By using this kit approximately 15 lbs PER SIDE will be removed from the front of the car.

This kit is for an acura integra spindle.. if you have a civic spindle you can get the
spherical ring and bracket from fastbrakes for very cheap.
This kit was never ran on car and totally complete with boxes for calipers and brake pads.
It was used for mock up only...

Asking 550 plus shipping. Please PM me offers. Kit is already off car and boxed up

 

Alaniz MK11 square port B16 head
Complete super tech valve train
oversized valves
springs retainers
Chambers opened up to 84mm
Head is stamped by Alaniz MK11

The head was fully check by Tom at Portflow
this week. Pressure tested and resurfaced.
The head made 265 hp with twm itbs/ skunk 3 cams/
race header/ and 13-1 wiescos back in the day.
Going with different head for new project.

Head is located in socal area
Asking 1400.00
paid over 1850.00 for it.
buyer pays shipping and paypal 3% fees

Pm me on here for info

 

Aeromotive A1000 13101 FPR..Only used for mock up.. Then switched to a Weldon. Comes with factory barbed fitting and a 1/8npt adapter so you can run push lock fittings. Comes as seen in picture.

$130 Shipped 48 States

[

 

--aluminum 5"x5"x8"inch baffled catch can I have for sale! I am asking $160 for this. The filters have been removed and sold, but I can obtain more for additional fee or just give you the part number.
The can is baffled inside to reduce the amount of oil vapor that escapes out of the filters. They collect and catch it allowing it to fall back into the bottom of the can.
The sheer volume of this catch can with the amount of volume it vents out allows your engine to breathe much better compared to the little cheap sealed 'greddy' like units.

fits on the civic/integra battery tray

 

Full Race T4 flanged .44 dual gated Top Mount B Series - $700
Tial MVR 44mm gates black - Sold
Blox 72mm TB - $250 With 4bar $200 w/o
Custom breather kit with lines- $200
GE Scatter Shield B series - Sold
Bosch .44's x 2 $150 ea

 

Edelbrock Victor X Intake for B16 Head ( 2 Fuel rails / 90mm accufab TB / 4" vibrant v-band) $450
1200 hp Spearco water to air intercooler $600 obo
Forward facing 321 stainless steel turbo manifold ( Burns Stainless collector / comes with 2 -44mm turbosmart waste gates) also has 4 egt bungs $1000 odo
Complete z-10 oil system $1000 obo

 

Avid Racing solid billet mounts for EK
powdercoated black
comes with OEM rear Tbracket and LH post mount for 99-00si
$350 plus shipping and paypal fees
or $280 without the OEM parts

these parts have been bolted to the car but has never been used for street or competition

 

-BNIB B series Aeromotive fuel rail
$170

[IMG][/IMG]

-mint BMC 6L intake manifold with matched 90mm Accufab throttle body attached
throttle body comes with TPS sensor
$1200 OBO

[IMG][/IMG]

-BNIB Borg Warner S400SX Billet 67mm
1.25 turbine housing
1600 black deg coating
$1600 OBO

[IMG][/IMG]


for more pics and info my cell is 336 575 0563
***im currently located in TN***

 

SOLD

 

Name: Carlos
Contact: PM or txt/call 804-687-7125
Location: Richmond VA 23005

AFI T3 Top mount turbo manifold
Precision T3 67/65 billet wheel journal bearing turbo
TiaL 44mm wastegate
Custom dumptube
Custom pie-cut 3" downpipe

This setup made 745hp on 25psi on a 83mm lsvtec and 636hp on 30 psi on a stock bore b16 piston/rod setup

This setup maybe has a total of 25 hours of use including dyno time and 3 hits at the track.

Price for whole setup picked up is $2200 shipping is available but buyer pays for it. If using PayPal buyer pays fees.

 

turn key 10 second civic street car

http://columbiamo.craigslist.org/cto/3730850808.html

 

gforce dogbox with quaife lsd b series freshly rebuilt and ready to slap on....sold
all work completed by dynamic performance
afi t4 forward facing 44mm twin
scroll manifold with 4" up pipe and wastegate up pipes.............................1,300.

2 silver 44mm tial wastegates........................................ .............................SOLD!

brand new S372r heat coated exhuast side.............................................. ..800

brand new full carbon fiber strada 3 piece wide
front end 92-95 civic. mounted for fitment still have not drilled holes.............1,500.

brand new full carbon fiber strada drag wing 92-95 hatchback........................500.

BNIB hondata cpr with k series coil packs, coil pack mount,
distributer cap and 2 sets of plugs............................................. .................sold

avid solid engine mounts civic or integra b series mounts...............................300.

tilton twin disc used but in great condition......................................... ...............600.

cnc staging brake............................................. .......................................sold

golden eagle scatter shield b series............................................ ..................200.

brand new b&r fittings catch can breather with filters fittings and lines...............sold

84.5mm darton open decked sleeved b18b block assembled with
manley turbo tuff rods, cp 9.5:1 comp pistons. acl race bearings.
golden eagle block girdle. arp main studs.built to handle 1,000+hp............. ... ...3000.

obd 1 hondata s300 w boost by gear solonoid.......................................... .........sold

jg built b16 head dual valve springs. ported w oversized intake valves...............900

used vtec skunk 2 pro 3 cams.............................................. ..........................sold

bnib 8 bosch 1580cc injectors no resistor box needed.
comes w clips............................................. ............................600 for 8 or 350 for 4.


willing to trade some items for K swap.




text or pm......8318014597

 

FS Slowmotion Motorsport's k-series turbo manifold with up-pipe and dump tubes. T4 divided manifold, two 38mm wastegate flanges(Does NOT include wastegates) 700$ located in ohio 3304184478

 

Noribilt top mount manifold for b series. T4 flange/46mm wastegate vband. $750 obo shipped.

Polished edelbrock intake manifold for ls. $200

pics failed sry.

 

Eagle rods with arp bolts for a b18(LS) or b20 200 firm

 

Complete b-series EG Hasport motor mounts for sale. The two side mounts were only used for one season and are U88A and the rear mount has a few more seasons on it and is solid.

Located in Portland, OR and I accept Paypal.

350 Shipped

 

Hello Folks, It has come to that day that I am actually parting out my racecar. I thought this day would never come but unfortunately it has. Here is a chance for you to pick up some quality parts for great pricing. Everything has low miles on it (between 20-30 total miles) and was kept in exceptional condition. Take a look and feel free to inquire.

p.s. I will keep this thread up to date whenever I sell something, so far stuff has been moving. Feel free to make an offer and if it works, I will get the stuff ready to ship. Thanks in advance.

**::Attention, Email is key, joone.nijjar@gmail.com:**

* ITR Shift Linkage with a BNIB Energy Suspension bushing kit included

* 4.9 Gear-X Final Drive kit for B16 trans

* Momo Monte Carlo Steering Wheel with Mugen Horn Button and NRG Quick Release as a set.


* Seat Rails & Sliders for Driver and Passenger Side, EG/DC. Used with Side Mount Seats.


* H22 Manual Timing Tension Conversion Complete


* JDM h22 Distributor wired for MSD external Coil. Includes MSD spark plug wires.


* H22 ARP head stud Kit with Lube, used


* ::Low Miles:: H22 oil pump bought brand new, Pro-Drive high pressure Oil Pump Gear installed, Kiazenspeed Balance Shaft Eliminator Kit installed.


* 1996 JDM H22a closed deck block Sleeved with Darton replacement sleeves, 89mm bore.


* Skunk2 K series 74mm TB with sensors and IAC Block off plate.



* Golden Eagle Oil Sandwich Plate




****SOLD to a Fellow H-T'er**** Thanks "DrCRX"
* H22 Carrillo Rods
* 89mm 13.5:1 CP pistons with relocated wrist pin for use with H22 rods and H23 crank. (20-30 miles tops!!!)

****SOLD to a Fellow H-T'er**** Thanks "92frostwhtdb2"
* PLX Wideband with Gauge.

****SOLD to a Fellow H-T'er****
* Hydro B series Clutchmasters twin disc fx700 Clutch
* DSS level 2.9 B-series axles.

****SOLD to a Fellow H-T'er**** Thanks "92siracer"
* H22 Valve Cover properly baffled and vented. Only releases pressure, not a bunch of oil...
* Custom h2b Scattershield powdercoated Silver

****SOLD to a Fellow H-T'er**** Thanks "Souler"
* Billet Aluminum coolant overflow catch can.
* MSD SS blaster coil
* MSD Digital 6 Ignition System

****SOLD to a Fellow H-T'er**** Thanks "richboy84"
* B&R Catch Can with lines

****SOLD to a Fellow H-T'er**** Thanks "H2BJON"
* Skunk2 k20 Fuel Rail with -6 fitting for fuel in

****SOLD to a Fellow H-T'er**** Thanks "MyLilCivic"
* SSR stainless steel 4-1 race header with bottom exit megaphone for an h2b with an h22 head.

****SOLD to a Fellow H-T'er**** Thanks "weedstnr"
* KStuned h2b Oilpan with pick up and dipstick, no dings/dents/damage.

****SOLD to a Fellow H-T'er**** Thanks "fliplude95"
* Blox Racing EG/DC Traction Bar
* XS FPR with -6 fittings in black.
* H to D series alternator relocator bracket with Alternator and belt
* h22 Euro-R Single Row Crank Pulley

****SOLD to a Fellow H-T'er**** Thanks "lovitalracer"
* Bogart Pro-4 wheels and tires. (car always rested on Jackstands) 4x100
Fr: 24.5x8.5x13 M&H slicks on 13x8 wheels (Back spacing clears brakes as large as Integra GSR/LS/RS/GS
Rr: 24.5x3.6x13 M&H skinnies

****SOLD****
* STR70mm B/H/D TB with sensors-

****SOLD****
* Skunk2 H22 Pro series stage 3 Camshafts**
* Skunk2 H22 Pro Series Cam Gears**
* DNR Ported h22 Cylinder head, includes SKunk2 Valve Train and Supertech Flat Valves.**

****SOLD to a Fellow H-T'er**** *Thanks
* Autometer Oil Pressure Gauge with Sender Unit, Autometer Water Temp Gauge with Sender Unit, and carbon Fiber bezel with slot for one more gauge. Fits into Radio din or Climate Control Slot on EG.

****SOLD to a Fellow H-T'er**** Thanks
* ID725 injectors for a Honda K series engine with low miles as well.

****SOLD to a Fellow H-T'er**** Thanks
* Skunk2 Oil Cap

****SOLD to a Fellow H-T'er**** Thanks
* MFactory B16 LSD with bearings

Email is the key: joone.nijjar@gmail.com

 

B-series axles $75 OBO


B-series half shafts $25 each


OBD-2 Altenator $50


OBD2 Distributor $175


B16 Stock Manifold $50



Skunk2 GSR Tuner Manifold-$150




Erick's Racing 68mm TB w/ sensors and thermal gasket $150



ACT 6 puck disk and HD pressure plate(less than 30 passes) $225




STR Cam Gears-$75-pending


Prices does not include shipping. No LOW BALLING!!!!!

Please call or text 424-230-6503, Thomas

 

b-series quaife LDS trans fresh rebuild carbon syncros b-16 final drive 1st 2nd gear gsr 3rd 4th 5th $1300
http://s1108.photobucket.com/user/be...a/241.jpg.html

skunk2 pro2 cams with bdl cam gears $500
http://s1108.photobucket.com/user/be...a/239.jpg.html
http://s1108.photobucket.com/user/be...a/240.jpg.html

bmc intake manifold $1300
http://s1108.photobucket.com/user/be...246-1.jpg.html

 

I have a H22 Moroso 5.5qt oil pan for sale mocked up and then sat its whole life. Will do $300.00 Shipped and paypal!







Next are Cusco and Quaife LSD $600.00 Shipped for each one..