for sale: ef8 parts, ls trans, act clutch, turbo parts, skunk2 intake mani, etc!!!
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Feb 2006
Location: Las Vegas, NV, USA
Posts: 640
Likes: 0
Received 0 Likes
on
0 Posts
for sale: ef8 parts, ls trans, act clutch, turbo parts, skunk2 intake mani, etc!!!
going all drag and more power for the car so i have some nice parts for sale. please DO NOT LOWBALL me as these are very nice and very rare parts that are all real, but dont be afraid to make real offers. Parts located in Las Vegas,NV. Buyer Pays shipping and paypal fees. message me on here. click on pics for larger image.
Skunk2 old school b16 intake manifold. Was hand ported by me to match my 70mm throttle body and runners were ported to match stock head but will work with any throttle body. It has 3 custom boost reference nipples tapped in the back that i installed. Made 430hp 370tq with this intake manifold. Sold
Real JDM EF9/EF8 guage cluster with pigtails. Sold to marioarias08
-4 turbo oil supply line with fitting off of my greddy 18g turbo. $25
b&r fittings stock oil feed adapter $5, sells for $10 on b&rfittings.com.
Password JDM Carbon Fiber Spark Plug Cover B-series. No cracks or scratches. $75
Real JDM Vision front strut bar for EF. these are no longer available. $200
No name rear EF strut bar $20 obo
CRX MADD Engineering Motor Mounts in good condition for cable trans. Have gone low 11's w/these. $50
USDM S1 Integra cable trans open diff no grinds $150 obo, no papers but was bought from mp motorsports and is legit.
Real JDM Greddy Manual Boost Controller. The best manual boost controller you can buy. Made 430hp w/this controller. $75, cost $200 new
I also have a small spline b-series cable trans ACT Xtreme Pressure Plate and 4 puck unsprung racing clutch that was used for 1 racing season and has very little miles on it as i dont really drive my car. Made 430hp and 370lbs tq and held good. There are a couple pads that are missing some clutch material and the face of the pressure plate could probably use a resurface. If u wanted to buy a new disk they are only around $100. Price- $200. i can also include the stock flywheel if you needed it for $25 more.
Skunk2 old school b16 intake manifold. Was hand ported by me to match my 70mm throttle body and runners were ported to match stock head but will work with any throttle body. It has 3 custom boost reference nipples tapped in the back that i installed. Made 430hp 370tq with this intake manifold. Sold
Real JDM EF9/EF8 guage cluster with pigtails. Sold to marioarias08
-4 turbo oil supply line with fitting off of my greddy 18g turbo. $25
b&r fittings stock oil feed adapter $5, sells for $10 on b&rfittings.com.
Password JDM Carbon Fiber Spark Plug Cover B-series. No cracks or scratches. $75
Real JDM Vision front strut bar for EF. these are no longer available. $200
No name rear EF strut bar $20 obo
CRX MADD Engineering Motor Mounts in good condition for cable trans. Have gone low 11's w/these. $50
USDM S1 Integra cable trans open diff no grinds $150 obo, no papers but was bought from mp motorsports and is legit.
Real JDM Greddy Manual Boost Controller. The best manual boost controller you can buy. Made 430hp w/this controller. $75, cost $200 new
I also have a small spline b-series cable trans ACT Xtreme Pressure Plate and 4 puck unsprung racing clutch that was used for 1 racing season and has very little miles on it as i dont really drive my car. Made 430hp and 370lbs tq and held good. There are a couple pads that are missing some clutch material and the face of the pressure plate could probably use a resurface. If u wanted to buy a new disk they are only around $100. Price- $200. i can also include the stock flywheel if you needed it for $25 more.
Last edited by 90 JDM EF8; 03-23-2013 at 11:19 AM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
90 JDM EF8
For Sale
18
04-17-2013 12:37 PM