pte sc61/t4, defi, 4g63 parts, misc turbo stuff
#1
Honda-Tech Member
Thread Starter
pte sc61/t4, defi, 4g63 parts, misc turbo stuff
Im helping a friend sell a few parts, he is parting out his 1g eclipse. (picture available on request)
PTE SC61 T04S full T4 .68ar (4" inlet, 3" vband outlet) w/ extra vband stub and/or current downpipe (under 50 miles of use) - 720
PTE SC61 with a chipped compressor wheel sucked in a wire but other then that in perfect shape, T04S .58ar full T4 (4" inlet, 3" vband outlet) - *SOLD*
SPAL 1360 Pusher Fans - 90
Defi D-Gauge Oil Pressure in PSI 0->145 (black, 52mm, fastest oil pressure gauge ive seen) - *SOLD*
Defi D-Gauge A/F (needle, not blinky lights, works with narrowband very well, black, 52mm) - *SOLD*
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
The following parts are all for a 1g eclipse/talon
AEM EMS for 1g w/ 3.5bar map and RTD EGT - 1400
Built 9:1 w/ CP Pistons, Pauter Rods, ARP Mains, knife-edged crank, no balance shafts, ARP Headstuds, Mitsu Metal Headgasket, Completely rebuilt head (seats/seals/etc) w/ 1mm oversize Crower valves (in/ex), Crower Ti Retainers, Crower Springs, new style lifters - 2500 obo
TRE Race Trans (see their site for complete list of modifications http://www.teamrip.com, should work in 2G also since its 2003 based and has a 2g bellhousing) w/ Spool, TRE 1st gear, Cryo treated gearsets - 2500
HKS 272/272 Cams (would prefer to sell with motor) - 420
Magnus Intake Manifold w/ Accufab 75mm TB (brand new just some dynotime on TB, also has new Ford TPS) - 600
SFP T4 Tubular Manifold w/ 46mm TiAL WG Flange - 350
Oil Filter relocation kit (use big *** ford filter) -8AN lines, adapter, etc - 150
8pt mild steel roll cage kit (never installed, includes everything) - 225
16x7.5 5x114 Kosei K1 rims (grey) w/ Dunlop SP800 Tires w/ plenty of tread (225mm wide), comes with 20 black gorrila lock lug nuts & key - 600
2G scatter sheild - 120
Buschur Racing bolton FP regulator - 225
90 eclipse GSX shell w/ new fenders & doors, wave in the roof, needs paint, roof skin can be replaced, shaved hood and skirt moldings, 2piston "big brake" calipers, rebuilt rear calipers, SS brake lines, 4 bolt rear, -6an Fuel Line from tank to rail - email for info
Thanks,
liam
Modified by liam821 at 2:06 PM 10/11/2004
Modified by liam821 at 2:54 PM 10/16/2004
Modified by liam821 at 5:43 PM 10/21/2004
PTE SC61 T04S full T4 .68ar (4" inlet, 3" vband outlet) w/ extra vband stub and/or current downpipe (under 50 miles of use) - 720
PTE SC61 with a chipped compressor wheel sucked in a wire but other then that in perfect shape, T04S .58ar full T4 (4" inlet, 3" vband outlet) - *SOLD*
SPAL 1360 Pusher Fans - 90
Defi D-Gauge Oil Pressure in PSI 0->145 (black, 52mm, fastest oil pressure gauge ive seen) - *SOLD*
Defi D-Gauge A/F (needle, not blinky lights, works with narrowband very well, black, 52mm) - *SOLD*
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
The following parts are all for a 1g eclipse/talon
AEM EMS for 1g w/ 3.5bar map and RTD EGT - 1400
Built 9:1 w/ CP Pistons, Pauter Rods, ARP Mains, knife-edged crank, no balance shafts, ARP Headstuds, Mitsu Metal Headgasket, Completely rebuilt head (seats/seals/etc) w/ 1mm oversize Crower valves (in/ex), Crower Ti Retainers, Crower Springs, new style lifters - 2500 obo
TRE Race Trans (see their site for complete list of modifications http://www.teamrip.com, should work in 2G also since its 2003 based and has a 2g bellhousing) w/ Spool, TRE 1st gear, Cryo treated gearsets - 2500
HKS 272/272 Cams (would prefer to sell with motor) - 420
Magnus Intake Manifold w/ Accufab 75mm TB (brand new just some dynotime on TB, also has new Ford TPS) - 600
SFP T4 Tubular Manifold w/ 46mm TiAL WG Flange - 350
Oil Filter relocation kit (use big *** ford filter) -8AN lines, adapter, etc - 150
8pt mild steel roll cage kit (never installed, includes everything) - 225
16x7.5 5x114 Kosei K1 rims (grey) w/ Dunlop SP800 Tires w/ plenty of tread (225mm wide), comes with 20 black gorrila lock lug nuts & key - 600
2G scatter sheild - 120
Buschur Racing bolton FP regulator - 225
90 eclipse GSX shell w/ new fenders & doors, wave in the roof, needs paint, roof skin can be replaced, shaved hood and skirt moldings, 2piston "big brake" calipers, rebuilt rear calipers, SS brake lines, 4 bolt rear, -6an Fuel Line from tank to rail - email for info
Thanks,
liam
Modified by liam821 at 2:06 PM 10/11/2004
Modified by liam821 at 2:54 PM 10/16/2004
Modified by liam821 at 5:43 PM 10/21/2004
#4
Honda-Tech Member
Thread Starter
Re: pte sc61/t4, defi, 4g63 parts, misc turbo stuff (b18bturbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b18bturbo »</TD></TR><TR><TD CLASS="quote">is that motor a 6bolt ot 7bolt motor is he negotiable on the price </TD></TR></TABLE>
Its a 6bolt - the motor has maybe 750 miles on it. Was built professionally. And on price im not sure. Ill PM you the information.
It dynod 480whp letting off at 5200rpms.
thanks,
liam
Its a 6bolt - the motor has maybe 750 miles on it. Was built professionally. And on price im not sure. Ill PM you the information.
It dynod 480whp letting off at 5200rpms.
thanks,
liam
#7
Honda-Tech Member
Thread Starter
Re: (Dirk-EG)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dirk-EG »</TD></TR><TR><TD CLASS="quote">sent a PM for the Defi gauges, let me know</TD></TR></TABLE>
answered
answered
Trending Topics
#11
Honda-Tech Member
Thread Starter
Re: (2008cc)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2008cc »</TD></TR><TR><TD CLASS="quote">how bout pics of the turbo?</TD></TR></TABLE>
I have some pictures of when it was new - but it only has maybe 50 miles of use now. This is actually the 2nd SC61 on the car, the first one sucked in a sensor wire + plug and distoryed the compressor wheel. This turbo we are selling is the 2nd one - it only has 50 miles maybe on it. We still have the orginal SC61, it just needs a new compressor wheel. Ill sell it cheap.
When it was new
http://tiora.net/~jay/pix/?path=race-car/new-turbo
Being installed.
Ill get some current pictures asap.
thanks,
liam
I have some pictures of when it was new - but it only has maybe 50 miles of use now. This is actually the 2nd SC61 on the car, the first one sucked in a sensor wire + plug and distoryed the compressor wheel. This turbo we are selling is the 2nd one - it only has 50 miles maybe on it. We still have the orginal SC61, it just needs a new compressor wheel. Ill sell it cheap.
When it was new
http://tiora.net/~jay/pix/?path=race-car/new-turbo
Being installed.
Ill get some current pictures asap.
thanks,
liam
#13
Re: (liam821)
Dibbs on the PTE SC61 with a chipped compressor wheel sucked in a wire but other then that in perfect shape, T04S .58ar full T4 (4" inlet, 3" vband outlet)
I will have the money in 4 days 125 shipped?
I will have the money in 4 days 125 shipped?
#14
Honda-Tech Member
Thread Starter
Re: (InJ3cted)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by InJ3cted »</TD></TR><TR><TD CLASS="quote">Dibbs on the PTE SC61 with a chipped compressor wheel sucked in a wire but other then that in perfect shape, T04S .58ar full T4 (4" inlet, 3" vband outlet)
I will have the money in 4 days 125 shipped? </TD></TR></TABLE>
I got your PM, and two others. Your first dibs. Ill wait until friday. If anybody else wants it, PM me. Friday it goes. Its $125+shipping. Let me know your zip, and ill get you a shipping quote.
thanks,
liam
I will have the money in 4 days 125 shipped? </TD></TR></TABLE>
I got your PM, and two others. Your first dibs. Ill wait until friday. If anybody else wants it, PM me. Friday it goes. Its $125+shipping. Let me know your zip, and ill get you a shipping quote.
thanks,
liam
#15
Honda-Tech Member
Join Date: May 2001
Location: Logan, Utah, U.S.
Posts: 1,535
Likes: 0
Received 0 Likes
on
0 Posts
Re: (liam821)
PTE SC61 with a chipped compressor wheel sucked in a wire but other then that in perfect shape, T04S .58ar full T4 (4" inlet, 3" vband outlet) - 125
SOLD up for the rest!!!
SOLD up for the rest!!!
#17
Honda-Tech Member
Thread Starter
Re: (DohcVtecCrx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DohcVtecCrx »</TD></TR><TR><TD CLASS="quote">Got the one sold turbo...good seller fast shipping...up for a good seller!</TD></TR></TABLE>
Awesome lemme know how it works out for you!!
liam
Awesome lemme know how it works out for you!!
liam
Thread
Thread Starter
Forum
Replies
Last Post
Hon Dub
Classifieds: Forced Induction
31
10-04-2011 09:10 PM
drumking15
Classifieds: Forced Induction
15
05-30-2007 03:00 PM
flip1199
Northern California (Sales)
33
04-16-2007 07:10 PM
shermanyang
Classifieds: Forced Induction
25
07-14-2005 09:11 PM