Partout, b16 boosted crx
#1
Partout, b16 boosted crx
this is not really what i wanted to do with this car but i suppose its gonna have to work.
the motor is fresh, has about 300miles on it.
Jdm b16a
weisco 9;1 pistons
eagle rods
arp headstuds
arp mainstuds
clevite bearings
brian crower valvesprings
1000cc fuel injectors
255 fuel pump under hood
the trans is a 92-93 cable trans, with integra GSR hydro internals and an OBX LSD. tranny was just gone through at time of motor build
turbo kit consists of a custom front mount using a garret core and custom end tanks
Precision 60-1 turbo
3in downpipe
cheap manifold that has been braced.. works fine
HKS BOV
all piping included
along with oil feed and return lines
as far as electronics on the car
AEM EMS computer
full msd ignition system (coil, 6a box, pro cap)
this whole setup is currently in a 1990 honda crx and on low boost (17psi) on e85 it made 326.5hp spinning the tires on the dyno (needed better tires). we built it to run about 470hp daily on E85 gas.
Now as far as price. if someone wanted to buy ALL of it.. i'll let it go for $6000 for all of it, motor trans electronics and turbo kit. for an extra $800 i'll give you the whole car that it's in and everything
motor (includes fuel system) = 3750
trans = 950
turbo kit = 2100
AEM= 700
msd ignition system = 150
i dont have any pictures of the stuff as of right now. . besides pictures of the stuff in the car
everything is located in South Dakota, would also consider trades on bikes
the motor is fresh, has about 300miles on it.
Jdm b16a
weisco 9;1 pistons
eagle rods
arp headstuds
arp mainstuds
clevite bearings
brian crower valvesprings
1000cc fuel injectors
255 fuel pump under hood
the trans is a 92-93 cable trans, with integra GSR hydro internals and an OBX LSD. tranny was just gone through at time of motor build
turbo kit consists of a custom front mount using a garret core and custom end tanks
Precision 60-1 turbo
3in downpipe
cheap manifold that has been braced.. works fine
HKS BOV
all piping included
along with oil feed and return lines
as far as electronics on the car
AEM EMS computer
full msd ignition system (coil, 6a box, pro cap)
this whole setup is currently in a 1990 honda crx and on low boost (17psi) on e85 it made 326.5hp spinning the tires on the dyno (needed better tires). we built it to run about 470hp daily on E85 gas.
Now as far as price. if someone wanted to buy ALL of it.. i'll let it go for $6000 for all of it, motor trans electronics and turbo kit. for an extra $800 i'll give you the whole car that it's in and everything
motor (includes fuel system) = 3750
trans = 950
turbo kit = 2100
AEM= 700
msd ignition system = 150
i dont have any pictures of the stuff as of right now. . besides pictures of the stuff in the car
everything is located in South Dakota, would also consider trades on bikes
#6
Honda-Tech Member
iTrader: (1)
Join Date: Aug 2005
Location: from the 704 to the 919
Posts: 5,476
Likes: 0
Received 0 Likes
on
0 Posts
Re: Partout, b16 boosted crx
**WARNING** I highly advise against dealing with this guy. My roommate ordered a "Garrett GT35R" from this guy's other thread and received a box with a couple broken car parts and a rock in it... dead serious.
#7
Honda-Tech Member
Join Date: Jul 2006
Location: Huntsville, Al, US
Posts: 673
Likes: 0
Received 0 Likes
on
0 Posts
Re: Partout, b16 boosted crx
LOL WOW, I saw his thread about the gt35r turbo and i thought it was too good to be true, sorry for your friend, scammers blow....
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post