NIB Garrett T25's $270
08-25-2004, 08:23 AM
#1
Junior Member
Thread Starter
Join Date: Aug 2003
Location: SLC, UT
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
NIB Garrett T25's $260 shipped if you help me get a free ipod pm for details
I sold quite a few of these in this thread
Started off selling these just to help reduce the inventory to help make space. Then stopped selling them cause I was told a 3rd party (small company) was going to be buying all the rest. Turns out they only bought most the rest so I still have about 12 of these left. However the price has gone up.
Specs.
Turbine A/R .49
Compressor A/R .48
Internaly Gated w/ actuator (7psi)
shipping is included to the lower 48
Contact me either on here or email zizux@hotmail.com and I will get you an exact price on shipping. Also do the same for any questions.
I also have video of 91glassycrx who bought one of these and is running one on his car.
***RIGHT CLICK SAVE AS***
Clip1
Clip1
Clip1
As for feedback of buyers check the link I posted at the top of the page...
Modified by zizux at 10:47 PM 9/17/2004
Modified by zizux at 10:47 PM 9/17/2004
Started off selling these just to help reduce the inventory to help make space. Then stopped selling them cause I was told a 3rd party (small company) was going to be buying all the rest. Turns out they only bought most the rest so I still have about 12 of these left. However the price has gone up.
Specs.
Turbine A/R .49
Compressor A/R .48
Internaly Gated w/ actuator (7psi)
shipping is included to the lower 48
Contact me either on here or email zizux@hotmail.com and I will get you an exact price on shipping. Also do the same for any questions.
I also have video of 91glassycrx who bought one of these and is running one on his car.
***RIGHT CLICK SAVE AS***
Clip1
Clip1
Clip1
As for feedback of buyers check the link I posted at the top of the page...
Modified by zizux at 10:47 PM 9/17/2004
Modified by zizux at 10:47 PM 9/17/2004
08-25-2004, 11:05 AM
#3
Junior Member
Thread Starter
Join Date: Aug 2003
Location: SLC, UT
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Sent you a PM.
As far as the "can I use this on XXX" yes you can basicaly use any turbo on any motor, however this is sized for engines smaller then 2L
The biggest problem is going to be finding a manifold made for your engine and this turbo. So you may have to use an adaptor or have one custom made.
As far as the "can I use this on XXX" yes you can basicaly use any turbo on any motor, however this is sized for engines smaller then 2L
The biggest problem is going to be finding a manifold made for your engine and this turbo. So you may have to use an adaptor or have one custom made.
08-26-2004, 08:30 AM
#4
Junior Member
Thread Starter
Join Date: Aug 2003
Location: SLC, UT
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Re: (zizux)
Nevermind somone thought I was showing a link to my own ebay auctions...
Which I wasn't.
Anyway I removed it to avoid further confusion.
Modified by zizux at 4:43 AM 9/3/2004
Which I wasn't.
Anyway I removed it to avoid further confusion.
Modified by zizux at 4:43 AM 9/3/2004
08-26-2004, 01:31 PM
#6
Junior Member
Thread Starter
Join Date: Aug 2003
Location: SLC, UT
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
custom made is probably the way most people go, but if you check out the other thread I belive somone posted one...
Course it depends on what car you have it in, you can get the flange and pipe as a kit on ebay. *(I don't have a link but I've seen them a few times)
Course it depends on what car you have it in, you can get the flange and pipe as a kit on ebay. *(I don't have a link but I've seen them a few times)
Trending Topics
09-02-2004, 05:19 PM
#10
Join Date: May 2004
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Re: (zizux)
he is just say'n that he thinks that is your ebay account and you just priced that high to make everyone fell your selling them a good price (which i think you are) but its hard for him to belive that its not your ebay account becouse you located in ut and so is the ebay seller 
09-02-2004, 05:59 PM
#11
Join Date: Jul 2004
Location: NOVA
Posts: 461
Likes: 0
Received 0 Likes
on
0 Posts
Everyone in their right mind knows you are selling them at a good price. However, you went out of your way and attempted to mislead people. Bad business ethics bring bad business. That's a fact.
PS:Street source sells them for 250 save yourself a couple of bucks. Or try http://www.groupbuycenter.com
PS:Street source sells them for 250 save yourself a couple of bucks. Or try http://www.groupbuycenter.com
09-02-2004, 07:40 PM
#12
Junior Member
Thread Starter
Join Date: Aug 2003
Location: SLC, UT
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
actualy that isn't my ebay account, I do know the guy who's it is, and thats not the point as you can see on there he has sold quite a few of them.
FYI My ebay account is drahcirt and if you send me an email through ebay it will go to zizux@hotmail.com, if you don't belive me your welcome to try it.
As for the Street source, more power to them.
FYI My ebay account is drahcirt and if you send me an email through ebay it will go to zizux@hotmail.com, if you don't belive me your welcome to try it.
As for the Street source, more power to them.
09-02-2004, 09:12 PM
#13
Honda-Tech Member
Join Date: Jun 2002
Location: FL, USA
Posts: 743
Likes: 0
Received 0 Likes
on
0 Posts
Re: (zizux)
I also have a Garrett T25 that I bought from zizux who is a good seller. I am selling my brand new in box T25 with oil feed and return lines for 320 + shipping. The oil lines are from fast-turbo.com. I wouldn't mind selling the turbo by itself for 230 + shipping. Somebody pm me if you'd like it. Pics can be found here: https://honda-tech.com/zerothread?id=974688
09-09-2004, 10:02 AM
#18
Junior Member
Thread Starter
Join Date: Aug 2003
Location: SLC, UT
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Bump, BTW they have the wastegates in the box with the turbos but they aren't installed, Installation is simple just use the supplied bolts and screw it on also make sure the arm has the wastegate closed all the way it may need to be adjusted but it shouldn't be a big deal. Leme know if you need some help.
09-13-2004, 08:46 AM
#20
Junior Member
Thread Starter
Join Date: Aug 2003
Location: SLC, UT
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Hmm.... Might actually huh?
BTW All those that ordered over the weekend your turbos have shipped. I've pmed you all tracking numbers. Good luck and happy boosting
BTW All those that ordered over the weekend your turbos have shipped. I've pmed you all tracking numbers. Good luck and happy boosting
09-13-2004, 09:57 PM
#21
Honda-Tech Member
Join Date: Oct 2002
Location: BG, KY, United States
Posts: 3,539
Likes: 0
Received 0 Likes
on
0 Posts
Re: (zizux)
sorry for the messed up wording.. or confusion.. I bothered you twice before about shipping overnight.. but I didn't end up selling my turbo kit.. I might have a buyer soon, so I will need the t25 to finish it off and send out.
Thats if all goes quickly and you still have one left
Thats if all goes quickly and you still have one left
09-14-2004, 07:31 AM
#23
Junior Member
Thread Starter
Join Date: Aug 2003
Location: SLC, UT
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
90civichb its cool I was just giving you crap
[256] JP-03 they are good for around ~250 WHP depending on setup of course. While it might be possible to make more if you want alot more then 250 hp @ the ground you might want to look for a bigger turbo.
[256] JP-03 they are good for around ~250 WHP depending on setup of course. While it might be possible to make more if you want alot more then 250 hp @ the ground you might want to look for a bigger turbo.