GT3582R Turbo
11-08-2011, 05:54 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2009
Location: Kent, WA
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
GT3582R Turbo
Used Garrett GT3582R that has sucked up a vacuum hose and is damaged now. Was previously used on a SRT4 street car.
Precision T3 Exhaust housing with a .63 A/R, excellent spool up for a 4 cylinder that's a street car.
Compressor wheel is damaged and has to be replaced. The turbo also has some in/out shaft play.
You cannot install this turbo as it is, it will need to be repaired/rebuilt.
The compressor housing clamping plates were lost and I don't have them.
The red AN fitting and the push lock fitting are included with the turbo.
Asking $400 shipped
Precision T3 Exhaust housing with a .63 A/R, excellent spool up for a 4 cylinder that's a street car.
Compressor wheel is damaged and has to be replaced. The turbo also has some in/out shaft play.
You cannot install this turbo as it is, it will need to be repaired/rebuilt.
The compressor housing clamping plates were lost and I don't have them.
The red AN fitting and the push lock fitting are included with the turbo.
Asking $400 shipped
Thread
Thread Starter
Forum
Replies
Last Post
