FS: Sleeved Honda B16a3 engine components incl. AEM & Turbocharger -PA
#1
Junior Member
Thread Starter
Join Date: Jul 2005
Location: Mechanicsburg, PA, USA
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
FS: Sleeved Honda B16a3 engine components incl. AEM & Turbocharger -PA
I have over $10,000 into this and i'm looking for $6500 obo. Attached is the photo's of the stuff I have at the house, the rest is at a local machine shop.
B16a3 Block:
New Darton MID sleeves bored to 83mm installed by ERL Performance
New Block Girdle installed by ERL Performance (This requires a B18 oil pan no included)
New Eagle Crank
New Crower forged rods
New Aries forged pistons 9:1 CR
New ARP main studs
New ACL Bearings
New Cometic head gasket and other gasket kits
Balanced Assembly
GSR Water pump, still needs installed
Needs larger oil pan to fit over block girdle
B16a3 Head:
New Ferrea intake and exhaust valves with machine shop valve job and installation
New PAC racing valve springs
New Crower Turbo 2 CAMs
New Edlebrock Victor X 4764 Intake manifold
New AEM Fuel Rail
New AEM Fuel pressure regulator
New B&M Fuel Pressure gauge
New RC 550 injectors
New ARP head studs
Other parts included:
New AEM 30-1040 Engine Management
New Koyo aluminum radiator
Used Turbonetics T3 Turbo w/ various pipe.
Used Intercooler
Used downpipe
Used high flow cat
B16a3 Block:
New Darton MID sleeves bored to 83mm installed by ERL Performance
New Block Girdle installed by ERL Performance (This requires a B18 oil pan no included)
New Eagle Crank
New Crower forged rods
New Aries forged pistons 9:1 CR
New ARP main studs
New ACL Bearings
New Cometic head gasket and other gasket kits
Balanced Assembly
GSR Water pump, still needs installed
Needs larger oil pan to fit over block girdle
B16a3 Head:
New Ferrea intake and exhaust valves with machine shop valve job and installation
New PAC racing valve springs
New Crower Turbo 2 CAMs
New Edlebrock Victor X 4764 Intake manifold
New AEM Fuel Rail
New AEM Fuel pressure regulator
New B&M Fuel Pressure gauge
New RC 550 injectors
New ARP head studs
Other parts included:
New AEM 30-1040 Engine Management
New Koyo aluminum radiator
Used Turbonetics T3 Turbo w/ various pipe.
Used Intercooler
Used downpipe
Used high flow cat
Last edited by 94sol; 03-02-2016 at 01:33 PM. Reason: Price Update
#2
re: FS: Sleeved Honda B16a3 engine components w/ EMS & Turbocharger -PA
bump for a fellow mechanicsburg resident....your craiglist ad says 8.5:1. not sure if it makes a difference to anyone but may need to clarify. good luck with sale...rest assured anyone interested: DMS is very good at what they do and if they built the engine, I wouldn't think twice about running it.
#7
Junior Member
Thread Starter
Join Date: Jul 2005
Location: Mechanicsburg, PA, USA
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
re: FS: Sleeved Honda B16a3 engine components w/ EMS & Turbocharger -PA
Sorry for the late reply guys, for some reason email notifications stopped working on this thread. Also thanks for the heads up on the craigslist link removal. I've uploaded this pictures. I do have some more, but most are redundant and I can also take more pictures if anyone requests. Thanks!
Trending Topics
#11
Junior Member
Thread Starter
Join Date: Jul 2005
Location: Mechanicsburg, PA, USA
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
#15
Junior Member
Thread Starter
Join Date: Jul 2005
Location: Mechanicsburg, PA, USA
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
#20
Junior Member
Thread Starter
Join Date: Jul 2005
Location: Mechanicsburg, PA, USA
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
#23
Junior Member
Thread Starter
Join Date: Jul 2005
Location: Mechanicsburg, PA, USA
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts