FS: Precision turbo & cheap intercooler
I have a Precision SC34 for sale. I bought the turbo from a respected member of Team-Integra.net, Integra4dr210. I was going to use it on my car, but I found another turbo that meets my goals better. Like most of Precision's turbos the SC34 is based off of Garrett's T3/T04B turbo's. This turbo has a .63ar T3 flanged exhaust/turbine housing and a .60 intake/compressor housing with a 3" inlet and 2" outlet. This turbo can easily push 300WHP on most 4cyl vehicles at low-to-mid boost, and 400+ on high boost applications. The guy I bought the turbo from was putting down 325WHP, very nice for any sport compact. There is almost no shaft play. The turbo spins freely and does not bind at all. The only bad thing is that one of the studs seized on the outlet flange of the exhaust housing. I was able to remove the stud but it took some of the threads with it. All it needs is drilled and tapped for a larger stud, any machine shop could do that in 5-10 minutes. In my opinion, the turbo is ready to be bolted on and does not need a rebuild at this time.
ALL PRICES INCLUDE SHIPPING
Turbo is $400 firm




I also have a no-name intercooler for sale. I bought the intercooler off of a guy on eBay. The intercooler is 5" tall, 3" thick, and about 30" wide. One side of the intercooler is sprayed flat black, for the stealthy/sleeper look. There is a minor dent in one of the tubes. I have had the intercooler pressure tested and it held 30psi with no problems. This would be a great intercooler for a budget minded turbo build.
Intercooler is $70 firm




ALL PRICES INCLUDE SHIPPING
Turbo is $400 firm




I also have a no-name intercooler for sale. I bought the intercooler off of a guy on eBay. The intercooler is 5" tall, 3" thick, and about 30" wide. One side of the intercooler is sprayed flat black, for the stealthy/sleeper look. There is a minor dent in one of the tubes. I have had the intercooler pressure tested and it held 30psi with no problems. This would be a great intercooler for a budget minded turbo build.
Intercooler is $70 firm




Last edited by B18B1T; Oct 27, 2010 at 11:33 AM. Reason: added additional info
that fmic looks like a johnny race car fmic. if so its a very well peice. jrc made nice fmic while he was making them.
bump for some good prices. you might be hearing from me about the turbo.
bump for some good prices. you might be hearing from me about the turbo.
I am very surprised. I posted these parts on craigslist and team-integra, and you are the only person who has shown any interest in either of the parts.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
cheap, craigslist, fmic, fs, good, honda, intercooler, intercoolers, precision, rebuild, sale, sc34, side, turbo




