$250 shipped

brand new...only opened the box to make sure it was all there.

for those that dont know about this boost controller, here is what MSD says about it.

"This stand alone microprocessor boost controller is exactly what-over-the-top turbo powered cars need. This Control uses an extremely fast microcontroller to control boost pressure via an electronically operated waste gate valve.
Through easy to use Pro-Data+ software, you can control the amount of boost pressure used during the burnout and map a boost curve based on time for the launch (up to 12.5 seconds). Control over the boost pressure is achieved through a PWM output that controls a three way electrically operated air valve that is installed between the turbo and the waste gate actuator. (This can also be programmed to your particular actuator.) To help in setting up and tuning the Controller, there is also an acquisition file that records the engine rpm, manifold pressure and the pulse width modulator output. After a pass you can save and download the file to review each pass."

jegs- http://www.jegs.com/i/MSD/121/7562/10002/-1?CT=999

GM used these for years in there pro-fwd cars. feel free to ask any questions, thanks.



$250 shipped

for quickest response please e-mail me.... neon95acr@yahoo.com

 

bump! open to offers.

 

bump! lower price $275

 

bump! $250

 

bump?

 

final price....$220 shipped.

if i cant get that, then its just going to collect dust.

 

bump

 

final bump.