FS: JE Pistons 81mm 9.0:1 Turbo
07-18-2006, 05:39 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2004
Location: Hilliard, Oh, USA
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
FS: JE Pistons 81mm 9.0:1 Turbo
I am selling 4 JE (Not srp) pistons because i need to go oversized in my block. They are stock 81mm bore with very little wear. They were ran for under 200 miles and have almost no carbon buildup at all.
These are for the B18C1 block but should work on others. (I was going to use them in my ls-VTEC). They have the same part numbers.
Use http://www.jepistons.com/pdf/2006-sportcomp2.pdf to look up the specs on the part number forged underneath the piston. (# 81MD4)
Included in sale will be 4 pistons, rings, wrist pins, locks, JE sticker and full spec sheet for pistons.
Pistons are in great condition, and were professionally inspected by M&M Head Service shop.
I would include pictures, but i don't know how, so just email me at MrToasty@columbus.rr.com or AIM: MrToasty321 and i will send pictures.
-Mike
These are for the B18C1 block but should work on others. (I was going to use them in my ls-VTEC). They have the same part numbers.
Use http://www.jepistons.com/pdf/2006-sportcomp2.pdf to look up the specs on the part number forged underneath the piston. (# 81MD4)
Included in sale will be 4 pistons, rings, wrist pins, locks, JE sticker and full spec sheet for pistons.
Pistons are in great condition, and were professionally inspected by M&M Head Service shop.
I would include pictures, but i don't know how, so just email me at MrToasty@columbus.rr.com or AIM: MrToasty321 and i will send pictures.
-Mike
Thread
Thread Starter
Forum
Replies
Last Post
