---fs d series turbo kit and more!!---
03-22-2009, 04:58 PM
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: columbus, ga, us
Posts: 1,405
Likes: 0
Received 0 Likes
on
0 Posts
---fs d series turbo kit and more!!---
Im getting rid of all this stuff to either free some room in the shop or because its not needed since my girlfriend is going b series.
First up is a obd1 D16z6 Dizzy with MSD cap-60
GM 3 bar map and pigtail-60
BNIB D16 Eagle H-beam rods-280
Full D series turbo kit which includeds...SLS mini log turbo manifold, Godspeed 38mm wastegate, 2 1/4 downpipe, .57trim t3t4, xs power intercooler and piping, Turbo xs RFL bov, silicone couplers and t bolt clamps, autometer sport comp boost gauge and oil pressure gauge and oil lines-750obo
The turbo has no shaft play, no burning oil, the kit made excellent power and torque on a built and sleeved ZC. The manifold was rewelded for extra support. This is a good kit for someone on a budget and was used for two years by my girlfriend. The turbo is only 5 months old. This kit has never really seen boost much cause it was driven by a female who babied it and was scared to get on it.
SOLD!!!!!!!!!!!!!!!!!!!!!!!!!
Semi built DOHC ZC block standard bore 75mm vitara pistons/eagle rods. Has around 11k on it and it was pulled to go with a sleeved block. Compression was 140 accross the board. I will part the rods/pistons. Looking to get 300 for everything or 250 for the rods/pistons.
SOLD!!!!!!!!!!!!!!!!!!!!!!!!!
Will entertain trades for b series parts. Looking for a gsr swap plus cash on my side or gsr parts and possibly cash on my side. Thanks
First up is a obd1 D16z6 Dizzy with MSD cap-60
GM 3 bar map and pigtail-60
BNIB D16 Eagle H-beam rods-280
Full D series turbo kit which includeds...SLS mini log turbo manifold, Godspeed 38mm wastegate, 2 1/4 downpipe, .57trim t3t4, xs power intercooler and piping, Turbo xs RFL bov, silicone couplers and t bolt clamps, autometer sport comp boost gauge and oil pressure gauge and oil lines-750obo
The turbo has no shaft play, no burning oil, the kit made excellent power and torque on a built and sleeved ZC. The manifold was rewelded for extra support. This is a good kit for someone on a budget and was used for two years by my girlfriend. The turbo is only 5 months old. This kit has never really seen boost much cause it was driven by a female who babied it and was scared to get on it.
SOLD!!!!!!!!!!!!!!!!!!!!!!!!!
Semi built DOHC ZC block standard bore 75mm vitara pistons/eagle rods. Has around 11k on it and it was pulled to go with a sleeved block. Compression was 140 accross the board. I will part the rods/pistons. Looking to get 300 for everything or 250 for the rods/pistons.
SOLD!!!!!!!!!!!!!!!!!!!!!!!!!
Will entertain trades for b series parts. Looking for a gsr swap plus cash on my side or gsr parts and possibly cash on my side. Thanks
Last edited by seanc520; 03-23-2009 at 05:26 PM.
Thread
Thread Starter
Forum
Replies
Last Post
allmotor-B
Classifieds: Forced Induction
1
07-18-2013 06:31 PM
blackyhatchy
Florida (Sales)
2
04-19-2010 11:03 PM
