FS: COMPLETE B series kit. GT30R, Hondata, RLD-FAB Wideband, etc.
#1
FS: COMPLETE B series kit. GT30R, Hondata, RLD-FAB Wideband, etc.
(Located in Western Pennsylvania)
I'm testing the waters on this as everything is currently installed in the car and the car is for sale.
If the car doesn't sell soon, i'm going to take the kit off and sell it seperately and drop the price on the car itself. The link to the car is in my signature btw if anyone's interested.
Anyway, I WILL NOT PART THIS OUT!!!! Please don't bother asking.
4100 SHIPPED, no trades.
the price may seem high, but it is a 100% complete kit with everything but a boost controller and a fuel pump. All important gauges, engine/fuel management are included. You won't find a more complete, all quality kit for this price.
Sorry I don't have pictures of it all uninstalled, but it is still all on the car ... i can take more pics of everything if needed..
Good for 500+ whp with great spool!
RLD-FAB Equal Length Ramhorn Manifold
TiAL 38mm Wastegate w/ dump (.6 bar spring installed, .2 bar spring included)
TiAL 50 Blow Off Valve
Garrett GT3076R .82 a/r exhaust housing. Evans tuning made ~580 whp on this turbo)
2.5" Stainless Intercooler Piping fabbed by Hybridynamics*
3" Stainless downpipe with EGT bung fabbed by Hyrbidynamics**
Garrett/Peakboost 24x6x3.5" intercooler
Tapped Oil Pan
GM 3Bar Map sensor
Precision 1000cc Injectors
Hondata S300 installed in OBD1 GSR ECU w/ CD
AEM UEGO Wideband w/ 1 month old sensor
Autometer Boost Gauge (black)
Autometer EGT Gauge
Brand New HKS Turbo Timer
Brand New Endyn Catch Can
Integra 2-Gauge pod around cluster bezel.
All lines, hardware, couplers, T-Bolt Clamps, etc.
* Intercooler piping was made to fit 94+ Integra w/ LS/ITR style intake manifold. My car also has a JDM front end, but it should still work fine with the US front end. Should fit 92-00 civics with little modification. It is also sprayed with duplicolor high-heat Iron Cast.
** Downpipe was made for a B16, but I was told that it would still clear B18 deck heights. I can not confirm this, but can vouch that there is a decent sized gap between the downpipe and oil pan so it looks like it should work. Downpipe is wrapped in exhaust heat wrap, and has an EGT probe already installed in the bung.
The turbo has only been used on my current setup, and has roughly 5000 miles on it, the rest of the kit has another 3-5000 miles on it.
If you are serious about buying, PM me ... and i'll remove the kit as soon as money is recieved... it will be shipped out WITHIN the following week. The only time I have to work on my car is on the weekend so that is the cause of delay.
I'm well aware that these pictures kinda suck ... but it's all i really have of the bay. The picture of the 30R is shown without a filter ... it was ran with a filter for 3/4 of it's life ... and a screen for the remainder. I just looked at the fins the other day, and they are all still in minty fresh condition
aaannnnd the donor car
^^ FS for 11,000 FIRM BTW, check my sig.
Thanks,
Matt
Modified by miyagi at 10:29 AM 9/18/2007
Modified by miyagi at 10:31 AM 9/18/2007
I'm testing the waters on this as everything is currently installed in the car and the car is for sale.
If the car doesn't sell soon, i'm going to take the kit off and sell it seperately and drop the price on the car itself. The link to the car is in my signature btw if anyone's interested.
Anyway, I WILL NOT PART THIS OUT!!!! Please don't bother asking.
4100 SHIPPED, no trades.
the price may seem high, but it is a 100% complete kit with everything but a boost controller and a fuel pump. All important gauges, engine/fuel management are included. You won't find a more complete, all quality kit for this price.
Sorry I don't have pictures of it all uninstalled, but it is still all on the car ... i can take more pics of everything if needed..
Good for 500+ whp with great spool!
RLD-FAB Equal Length Ramhorn Manifold
TiAL 38mm Wastegate w/ dump (.6 bar spring installed, .2 bar spring included)
TiAL 50 Blow Off Valve
Garrett GT3076R .82 a/r exhaust housing. Evans tuning made ~580 whp on this turbo)
2.5" Stainless Intercooler Piping fabbed by Hybridynamics*
3" Stainless downpipe with EGT bung fabbed by Hyrbidynamics**
Garrett/Peakboost 24x6x3.5" intercooler
Tapped Oil Pan
GM 3Bar Map sensor
Precision 1000cc Injectors
Hondata S300 installed in OBD1 GSR ECU w/ CD
AEM UEGO Wideband w/ 1 month old sensor
Autometer Boost Gauge (black)
Autometer EGT Gauge
Brand New HKS Turbo Timer
Brand New Endyn Catch Can
Integra 2-Gauge pod around cluster bezel.
All lines, hardware, couplers, T-Bolt Clamps, etc.
* Intercooler piping was made to fit 94+ Integra w/ LS/ITR style intake manifold. My car also has a JDM front end, but it should still work fine with the US front end. Should fit 92-00 civics with little modification. It is also sprayed with duplicolor high-heat Iron Cast.
** Downpipe was made for a B16, but I was told that it would still clear B18 deck heights. I can not confirm this, but can vouch that there is a decent sized gap between the downpipe and oil pan so it looks like it should work. Downpipe is wrapped in exhaust heat wrap, and has an EGT probe already installed in the bung.
The turbo has only been used on my current setup, and has roughly 5000 miles on it, the rest of the kit has another 3-5000 miles on it.
If you are serious about buying, PM me ... and i'll remove the kit as soon as money is recieved... it will be shipped out WITHIN the following week. The only time I have to work on my car is on the weekend so that is the cause of delay.
I'm well aware that these pictures kinda suck ... but it's all i really have of the bay. The picture of the 30R is shown without a filter ... it was ran with a filter for 3/4 of it's life ... and a screen for the remainder. I just looked at the fins the other day, and they are all still in minty fresh condition
aaannnnd the donor car
^^ FS for 11,000 FIRM BTW, check my sig.
Thanks,
Matt
Modified by miyagi at 10:29 AM 9/18/2007
Modified by miyagi at 10:31 AM 9/18/2007
Thread
Thread Starter
Forum
Replies
Last Post
aldagod
Southeast (Sales)
9
01-13-2012 07:53 PM
b18velocity
Classifieds: Forced Induction
9
08-07-2005 03:58 PM
ek9turbo
Classifieds: Forced Induction
10
03-11-2005 04:27 AM