FS: 14b Turbo, FM intercooler, IC piping, missing map link
05-02-2005, 09:18 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2004
Location: Louisville, KY, USA
Posts: 1,153
Likes: 0
Received 0 Likes
on
0 Posts
FS: 14b Turbo, FM intercooler, IC piping, missing map link
I decided to make a new thread since I am now parting everything out. Here is what is for sale. PM me with offers. Everything must go, so no reasonable offer will be refused. Prices do not include shipping.
-Mitsubishi 14b turbo - Guy I bought it off of recently had it rebuilt apparently. Very little shaft play. Wastegate actuator is polished and turbo is nice and shiny from me polishing most of the compressor side. There is a small crack in the exhaust port, but this is normal for Mitsu turbos and it won't hurt a thing! Supposed to be set at 5.5lbs but I never ran it so I cannot guarantee anything. Also has the factory J 2" pipe so you can mount it up to the IC piping. Also has a DSM o2 in it the exhaust elbow. $175
-2.5" IC piping - Some is polished, some isn't. I have a 4' straight section and 2 nice u bends. $70
-Front Mount Intercooler - Ends tanks are semi polished. It's about 28" x 6" x 2.5". Great shape, never used, I bought it new. Inlet is 2", outlet is 2.5". $200
-Missing MAP Link - Only has one of the screws with it, but I do have the unit itself. $45
-Odds and ends - Some random vacuum lines. I also have a TON of old T25 parts. Compressor and Exhaust housings. Wastegate actuator. Exhaust elbow with o2 plugged. I have a couple of 2.5" exhaust clamps and 2" couplers that might help you out, also. $75
-Mitsubishi 14b turbo - Guy I bought it off of recently had it rebuilt apparently. Very little shaft play. Wastegate actuator is polished and turbo is nice and shiny from me polishing most of the compressor side. There is a small crack in the exhaust port, but this is normal for Mitsu turbos and it won't hurt a thing! Supposed to be set at 5.5lbs but I never ran it so I cannot guarantee anything. Also has the factory J 2" pipe so you can mount it up to the IC piping. Also has a DSM o2 in it the exhaust elbow. $175
-2.5" IC piping - Some is polished, some isn't. I have a 4' straight section and 2 nice u bends. $70
-Front Mount Intercooler - Ends tanks are semi polished. It's about 28" x 6" x 2.5". Great shape, never used, I bought it new. Inlet is 2", outlet is 2.5". $200
-Missing MAP Link - Only has one of the screws with it, but I do have the unit itself. $45
-Odds and ends - Some random vacuum lines. I also have a TON of old T25 parts. Compressor and Exhaust housings. Wastegate actuator. Exhaust elbow with o2 plugged. I have a couple of 2.5" exhaust clamps and 2" couplers that might help you out, also. $75
05-05-2005, 04:27 AM
#5
Honda-Tech Member
Thread Starter
Join Date: Jun 2004
Location: Louisville, KY, USA
Posts: 1,153
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: 14b Turbo, FM intercooler, IC piping, missing map link (MAFDARK)
2" OD Inlet Port and 2.5" OD Outlet Port
The core is 20.5" x 6.0" x 2.75"
Overall lenght is 28"
three mounting screw locations about 1/2 tall
The core is 20.5" x 6.0" x 2.75"
Overall lenght is 28"
three mounting screw locations about 1/2 tall
Thread
Thread Starter
Forum
Replies
Last Post
98B18C1
Classifieds: Forced Induction
39
02-10-2008 10:36 AM
1.8T_EG
Forced Induction
1
08-08-2003 06:26 PM
