Honda-Tech - Honda Forum Discussion

Notices
Classifieds: Forced Induction Buy/Sell/Trade Forced Induction related parts ONLY.

D Series/D16 Turbo and Manifold

Thread Tools
 
Search this Thread
 
Old 04-21-2005, 08:24 PM
  #1  
Member
Thread Starter
 
oxSLEEPERxo's Avatar
 
Join Date: Oct 2001
Posts: 3,350
Likes: 0
Received 0 Likes on 0 Posts
Default D Series/D16 Turbo and Manifold
I have:

-Garrett T3 50 Trim .42/.48ar w/Minimal Shaft Play for $185 Shipped
(There is no internal wastegate swing valve or wastegate actuator, right now its made to run an external wastegate, unless you buy a swing valve and wastegate actuator to run a internal wastegate setup)

-SOHC/D16/D15/D Series T3 Log Manifold for $180 Shipped

If you plan to send the money by paypal, add 3% to the total

The manifold has a bit of surface rust, which can be taken off with a wire brush or so. Manifold is not ac compatible

If you are interested, hit me up on aim or pm, my aim is oxsleeperxo

Check out my profile for vouches and my vouch thread https://honda-tech.com/zerothread?id=1033136










Modified by oxSLEEPERxo at 4:52 PM 4/25/2005
oxSLEEPERxo is offline  
Like
Old 04-22-2005, 04:44 AM
  #2  
Member
Thread Starter
 
oxSLEEPERxo's Avatar
 
Join Date: Oct 2001
Posts: 3,350
Likes: 0
Received 0 Likes on 0 Posts
Default Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
oxSLEEPERxo is offline  
Like
Old 04-22-2005, 05:45 PM
  #3  
Member
Thread Starter
 
oxSLEEPERxo's Avatar
 
Join Date: Oct 2001
Posts: 3,350
Likes: 0
Received 0 Likes on 0 Posts
Default Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by oxSLEEPERxo &raquo;</TD></TR><TR><TD CLASS="quote"> </TD></TR></TABLE>
oxSLEEPERxo is offline  
Like
Old 04-23-2005, 06:44 AM
  #4  
Member
Thread Starter
 
oxSLEEPERxo's Avatar
 
Join Date: Oct 2001
Posts: 3,350
Likes: 0
Received 0 Likes on 0 Posts
Default Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
oxSLEEPERxo is offline  
Like
Old 04-23-2005, 08:56 AM
  #5  
Honda-Tech Member
 
RTE117's Avatar
 
Join Date: Feb 2003
Location: Cincinnati, Ohio
Posts: 1,748
Likes: 0
Received 1 Like on 1 Post
Default Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
I PM'd you, and you haven't responded?
RTE117 is offline  
Like
Old 04-23-2005, 09:54 AM
  #6  
Member
Thread Starter
 
oxSLEEPERxo's Avatar
 
Join Date: Oct 2001
Posts: 3,350
Likes: 0
Received 0 Likes on 0 Posts
Default Re: D Series/D16 Turbo and Manifold (IDriveAHonda)
i did responded, but it is oil cooled
oxSLEEPERxo is offline  
Like
Old 04-23-2005, 05:13 PM
  #7  
Member
Thread Starter
 
oxSLEEPERxo's Avatar
 
Join Date: Oct 2001
Posts: 3,350
Likes: 0
Received 0 Likes on 0 Posts
Default Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
oxSLEEPERxo is offline  
Like

Trending Topics

Old 04-23-2005, 06:07 PM
  #8  
Junior Member
 
red_hatchback's Avatar
 
Join Date: Jan 2005
Location: Brownsville, Tx, United States
Posts: 621
Likes: 0
Received 0 Likes on 0 Posts
Default Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
hey $250 for it??
red_hatchback is offline  
Like
Old 04-23-2005, 07:13 PM
  #9  
Member
Thread Starter
 
oxSLEEPERxo's Avatar
 
Join Date: Oct 2001
Posts: 3,350
Likes: 0
Received 0 Likes on 0 Posts
Default Re: D Series/D16 Turbo and Manifold (red_hatchback)
lol you must be joking right
oxSLEEPERxo is offline  
Like
Old 04-24-2005, 06:56 AM
  #10  
Member
Thread Starter
 
oxSLEEPERxo's Avatar
 
Join Date: Oct 2001
Posts: 3,350
Likes: 0
Received 0 Likes on 0 Posts
Default Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
oxSLEEPERxo is offline  
Like
Old 04-24-2005, 03:40 PM
  #11  
Member
Thread Starter
 
oxSLEEPERxo's Avatar
 
Join Date: Oct 2001
Posts: 3,350
Likes: 0
Received 0 Likes on 0 Posts
Default Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by oxSLEEPERxo &raquo;</TD></TR><TR><TD CLASS="quote"> </TD></TR></TABLE>
oxSLEEPERxo is offline  
Like
Old 04-25-2005, 01:38 AM
  #12  
 
amh0001's Avatar
 
Join Date: Aug 2004
Location: Newhall, CA, USA
Posts: 214
Likes: 0
Received 0 Likes on 0 Posts
Default Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
ill give ya 300 for it

email me cuz im suck with PMs

amh0001@yahoo.com
amh0001 is offline  
Like
Old 04-25-2005, 02:59 AM
  #13  
Member
Thread Starter
 
oxSLEEPERxo's Avatar
 
Join Date: Oct 2001
Posts: 3,350
Likes: 0
Received 0 Likes on 0 Posts
Default Re: D Series/D16 Turbo and Manifold (amh0001)
emailed you, anymore offers?
oxSLEEPERxo is offline  
Like
Old 04-25-2005, 11:35 AM
  #14  
Member
Thread Starter
 
oxSLEEPERxo's Avatar
 
Join Date: Oct 2001
Posts: 3,350
Likes: 0
Received 0 Likes on 0 Posts
Default Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by oxSLEEPERxo &raquo;</TD></TR><TR><TD CLASS="quote">anymore offers?</TD></TR></TABLE>
oxSLEEPERxo is offline  
Like
Old 04-25-2005, 04:58 PM
  #15  
Member
Thread Starter
 
oxSLEEPERxo's Avatar
 
Join Date: Oct 2001
Posts: 3,350
Likes: 0
Received 0 Likes on 0 Posts
Default Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
pm's replied
oxSLEEPERxo is offline  
Like
Old 04-26-2005, 12:44 PM
  #16  
Member
Thread Starter
 
oxSLEEPERxo's Avatar
 
Join Date: Oct 2001
Posts: 3,350
Likes: 0
Received 0 Likes on 0 Posts
Default Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by oxSLEEPERxo &raquo;</TD></TR><TR><TD CLASS="quote">pm's replied </TD></TR></TABLE>
oxSLEEPERxo is offline  
Like
Old 04-26-2005, 07:48 PM
  #17  
Member
Thread Starter
 
oxSLEEPERxo's Avatar
 
Join Date: Oct 2001
Posts: 3,350
Likes: 0
Received 0 Likes on 0 Posts
Default Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
throw me offers or trades
oxSLEEPERxo is offline  
Like
Old 04-27-2005, 02:32 PM
  #18  
Member
Thread Starter
 
oxSLEEPERxo's Avatar
 
Join Date: Oct 2001
Posts: 3,350
Likes: 0
Received 0 Likes on 0 Posts
Default Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by oxSLEEPERxo &raquo;</TD></TR><TR><TD CLASS="quote">throw me offers or trades</TD></TR></TABLE>
oxSLEEPERxo is offline  
Like
Old 04-28-2005, 05:32 AM
  #19  
Member
Thread Starter
 
oxSLEEPERxo's Avatar
 
Join Date: Oct 2001
Posts: 3,350
Likes: 0
Received 0 Likes on 0 Posts
Default Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
oxSLEEPERxo is offline  
Like
Old 04-28-2005, 11:35 AM
  #20  
Member
Thread Starter
 
oxSLEEPERxo's Avatar
 
Join Date: Oct 2001
Posts: 3,350
Likes: 0
Received 0 Likes on 0 Posts
Default Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by oxSLEEPERxo &raquo;</TD></TR><TR><TD CLASS="quote"> </TD></TR></TABLE>
oxSLEEPERxo is offline  
Like
Old 04-28-2005, 08:44 PM
  #21  
Member
Thread Starter
 
oxSLEEPERxo's Avatar
 
Join Date: Oct 2001
Posts: 3,350
Likes: 0
Received 0 Likes on 0 Posts
Default Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by oxSLEEPERxo &raquo;</TD></TR><TR><TD CLASS="quote">I have:

-Garrett T3 50 Trim .42/.48ar w/Minimal Shaft Play for $185 Shipped
(There is no internal wastegate swing valve or wastegate actuator, right now its made to run an external wastegate, unless you buy a swing valve and wastegate actuator to run a internal wastegate setup)

-SOHC/D16/D15/D Series T3 Log Manifold for $180 Shipped

If you plan to send the money by paypal, add 3% to the total

The manifold has a bit of surface rust, which can be taken off with a wire brush or so. Manifold is not ac compatible

If you are interested, hit me up on aim or pm, my aim is oxsleeperxo

Check out my profile for vouches and my vouch thread https://honda-tech.com/zerothread?id=1033136






Modified by oxSLEEPERxo at 4:52 PM 4/25/2005</TD></TR></TABLE>
oxSLEEPERxo is offline  
Like
Old 04-29-2005, 04:59 AM
  #22  
Member
Thread Starter
 
oxSLEEPERxo's Avatar
 
Join Date: Oct 2001
Posts: 3,350
Likes: 0
Received 0 Likes on 0 Posts
Default Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by oxSLEEPERxo &raquo;</TD></TR><TR><TD CLASS="quote"> </TD></TR></TABLE>
oxSLEEPERxo is offline  
Like
Old 04-29-2005, 11:38 AM
  #23  
Member
Thread Starter
 
oxSLEEPERxo's Avatar
 
Join Date: Oct 2001
Posts: 3,350
Likes: 0
Received 0 Likes on 0 Posts
Default Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
oxSLEEPERxo is offline  
Like
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JG-Fabrications Re-Opening
JG-Fabrications
Forced Induction
17
10-17-2007 07:45 PM
dual WG wastegate ramhorn b series t3 turbo manifold made for 44mm wastegates
morgan@synapse motorsport
Classifieds: Forced Induction
14
12-04-2006 10:16 PM
D Series Turbo and Manifold
oxSLEEPERxo
Classifieds: Forced Induction
18
05-23-2005 07:44 AM
WTB!!!! D series turbo manifold (T3 flange) (internal wastegate)!!! (who makes one)
racinskittle
Classifieds: Forced Induction
2
08-21-2003 09:57 AM
t4 turbo manifold with tial 40mm
ninesecteg
Classifieds: Forced Induction
4
03-19-2003 11:29 AM
Tags
Back to Subforum
Classifieds: Forced Induction
View Next Unread
FS:Chipped P28 and OBD2b to OBD1 ECU Harness*Pics*




Advanced Search
Quick Reply: D Series/D16 Turbo and Manifold


Reply Closed Thread Share

All times are GMT -8. The time now is 02:32 AM.