60 trim,Drag manifold,LS block,LS crower head,slicks,misc..look
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2005
Location: Va
Posts: 3,035
Likes: 0
Received 0 Likes
on
0 Posts
60 trim,Drag manifold,LS block,LS crower head,slicks,misc..look
Things for sale or trade...
T3/T4 Garret 60 with a 56intake 60 exhaust it was welded to the exhaust so it will have about a 3inch piece you can weld your exhaust straight to and eliminate having to buy a downpipe. I had straight 3inch coming off of it straight out.. It has a small oil leak it drips very slowly. I'm putting on my new turbo and manifold tommorow..It makes a weird noise when idleing if you rev it up and let off but still boosts.. I got quoted at 275 for a rebuilt turbo with return shipping.. This turbo will make huge power it ran a 13.2 on 5 psi and raggied street tires spinning every gear. On 10psi it would be a low 12 sec car in a EG hatch..looking for 150firm..
B-series drag manifold with a 38mm tial flange and dumptube flange 200...
OBD-1 LS block was in running shape but has been sitting about 1 year. It has alittle surface rust but would be fine with a hone or bore and rebuilt. 150 firm
OBD-1 LS head it has Crower stainless steel valves,crower dual valvesprings and retainers with stock LS cams it comes with no cam gears 300 very firm..
OBD-1 LS Dizzy 75 bucks FIRM
B-Series- UNORTHODOX Lightweight crank pulley its polished 60 bucks
LS brand new MR.Gasket headgasket 50 bucks firm
Also have a MSD boost retard **** and harnesses make offers..
I also have some old school i believe EF wheels look prett decent with M&H 20x8x14 slicks still got all the wear marks fresh, this size tire is famous for not holding air so you gotta pump them up at the track and let the air pressure down in the staging lane if left sitting they deflate to 6psi after about 1hr and stay thier..make offers
Things I need LS aftermarket Intake manifold and throttle body, some wheels 15's or 16's,oil pressure,water temp,air fuel guages,EG hatch midwing just make offers...
I'M IN FREDERICKSBURG VA...
T3/T4 Garret 60 with a 56intake 60 exhaust it was welded to the exhaust so it will have about a 3inch piece you can weld your exhaust straight to and eliminate having to buy a downpipe. I had straight 3inch coming off of it straight out.. It has a small oil leak it drips very slowly. I'm putting on my new turbo and manifold tommorow..It makes a weird noise when idleing if you rev it up and let off but still boosts.. I got quoted at 275 for a rebuilt turbo with return shipping.. This turbo will make huge power it ran a 13.2 on 5 psi and raggied street tires spinning every gear. On 10psi it would be a low 12 sec car in a EG hatch..looking for 150firm..
B-series drag manifold with a 38mm tial flange and dumptube flange 200...
OBD-1 LS block was in running shape but has been sitting about 1 year. It has alittle surface rust but would be fine with a hone or bore and rebuilt. 150 firm
OBD-1 LS head it has Crower stainless steel valves,crower dual valvesprings and retainers with stock LS cams it comes with no cam gears 300 very firm..
OBD-1 LS Dizzy 75 bucks FIRM
B-Series- UNORTHODOX Lightweight crank pulley its polished 60 bucks
LS brand new MR.Gasket headgasket 50 bucks firm
Also have a MSD boost retard **** and harnesses make offers..
I also have some old school i believe EF wheels look prett decent with M&H 20x8x14 slicks still got all the wear marks fresh, this size tire is famous for not holding air so you gotta pump them up at the track and let the air pressure down in the staging lane if left sitting they deflate to 6psi after about 1hr and stay thier..make offers
Things I need LS aftermarket Intake manifold and throttle body, some wheels 15's or 16's,oil pressure,water temp,air fuel guages,EG hatch midwing just make offers...
I'M IN FREDERICKSBURG VA...
Trending Topics
#17
Honda-Tech Member
Join Date: Dec 2001
Location: abitibi-temiscamingue, Quebec, Canada
Posts: 1,731
Likes: 0
Received 0 Likes
on
0 Posts
Re: 60 trim,Drag manifold,LS block,LS crower head,slicks,misc..look (Samuels)
Hey man !
I really want this MSD retard ****.
get a shipping quote from USPS please, for the postal code J0Z1Y0.
thank's
jp
I really want this MSD retard ****.
get a shipping quote from USPS please, for the postal code J0Z1Y0.
thank's
jp
#18
Honda-Tech Member
Thread Starter
Join Date: Feb 2005
Location: Va
Posts: 3,035
Likes: 0
Received 0 Likes
on
0 Posts
Re: 60 trim,Drag manifold,LS block,LS crower head,slicks,misc..look (kranked91dx)
dude i work from 6am till 6pm and then 6am-6pm on saturday if you wanna get the quote and then send me that amount thats cool but i honestly don't have time right now..My zip is 22405
#20
Honda-Tech Member
Thread Starter
Join Date: Feb 2005
Location: Va
Posts: 3,035
Likes: 0
Received 0 Likes
on
0 Posts
Re: 60 trim,Drag manifold,LS block,LS crower head,slicks,misc..look (Samuels)
I also got a apexi el indiglo boost controller cost 140 will sell for 50 shipped..