Mugen CRX Racecar Build - PICS ADDED
#30
Honda-Tech Member
Thread Starter
Join Date: Mar 2005
Location: Perth WEST OZ, WA, Australia
Posts: 506
Likes: 0
Received 0 Likes
on
0 Posts
Re: Mugen CRX Racecar Build - PICS ADDED
should be in the vicinity of 800kgs - 1750lb?
_______
Bit of progress on the car... a little bit is better than nothing I guess, altho working at 35C (95F) isn't fun and when humidity is at 50-70% its even less fun because its like working at the swimming pool.
I've managed to wire in the hazard switch back into the harness, and from there I rewired the CRX stalk indicator switch to the B16A Civic harness. So now we have lights and indicators.
Last night I rewired the Wipers to a switch - means we now have LOW/OFF/HIGH on the wipers. Also redid the little panel where the IGN1,IGN2 and Start button sit in order to fit the wiper switch in properly. I will redo the hazard/kill switch side maybe tonight.
After that I think its just the rear lights and fuel pump left to do
_______
Bit of progress on the car... a little bit is better than nothing I guess, altho working at 35C (95F) isn't fun and when humidity is at 50-70% its even less fun because its like working at the swimming pool.
I've managed to wire in the hazard switch back into the harness, and from there I rewired the CRX stalk indicator switch to the B16A Civic harness. So now we have lights and indicators.
Last night I rewired the Wipers to a switch - means we now have LOW/OFF/HIGH on the wipers. Also redid the little panel where the IGN1,IGN2 and Start button sit in order to fit the wiper switch in properly. I will redo the hazard/kill switch side maybe tonight.
After that I think its just the rear lights and fuel pump left to do
Thread
Thread Starter
Forum
Replies
Last Post
spunautosports
Honda CRX / EF Civic (1988 - 1991)
3
06-11-2007 11:05 AM