FS: 16" Spoon SW388's 4x100 **AUTHENTIC**
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2002
Location: Mississauga, Ontario, Canada
Posts: 1,923
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
Ive got a set of authentic Spoon SW388's for sale. They are pretty rare since they have been discontinued. These wheels are flawless, no curb rash, no bends, no scratches. They are FLAWLESS.
I can authenticate these wheels for you if you have any doubts. I can take pics of the features that differentiates them from your average flat black Slipstream. If you dont know the difference between the two then dont bother wasting your time looking at this post. This set is also pretty rare since its a 4x100 applilcation. Most sets in Toronto/GTA are either 5x114.3 or 4x114.3. I know of only two sets of these wheels that are in 4x100. I am the third owner of these wheels and I believe the original buyer purchased them at Inline Four from the States, hence the yellow Spoon Sports sticker which is pretty rare.
Specs:
16 Inch
4x100
+45 Offset
Wheels are mounted on 205/40/16 Falken Ziex 502 Tires. They have about 85% Tread left on them with little camber wear.
![](https://img.photobucket.com/albums/v209/BigHairyGino/IMG_0411.jpg)
Wheels are located in Toronto and I will ship at the buyers expense.
IM or email me at j_ong@hotmail.com if youre serious about purchasing these classic wheels.
Price is $2000 CDN OBO or I will consider trades for the following sets of rims ONLY.
Work RSZR's
Volk TE37's
Regamaster EVO's
Thanks for looking
Modified by Fabfive at 4:01 PM 10/2/2006
I can authenticate these wheels for you if you have any doubts. I can take pics of the features that differentiates them from your average flat black Slipstream. If you dont know the difference between the two then dont bother wasting your time looking at this post. This set is also pretty rare since its a 4x100 applilcation. Most sets in Toronto/GTA are either 5x114.3 or 4x114.3. I know of only two sets of these wheels that are in 4x100. I am the third owner of these wheels and I believe the original buyer purchased them at Inline Four from the States, hence the yellow Spoon Sports sticker which is pretty rare.
Specs:
16 Inch
4x100
+45 Offset
Wheels are mounted on 205/40/16 Falken Ziex 502 Tires. They have about 85% Tread left on them with little camber wear.
![](https://img.photobucket.com/albums/v209/BigHairyGino/IMG_0411.jpg)
Wheels are located in Toronto and I will ship at the buyers expense.
IM or email me at j_ong@hotmail.com if youre serious about purchasing these classic wheels.
Price is $2000 CDN OBO or I will consider trades for the following sets of rims ONLY.
Work RSZR's
Volk TE37's
Regamaster EVO's
Thanks for looking
![](https://honda-tech.com/forums/images/smilies/emthup.gif)
Modified by Fabfive at 4:01 PM 10/2/2006
#3
Honda-Tech Member
Join Date: Mar 2002
Location: ATL WHAT, GA
Posts: 10,667
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
DAMN! I want these so bad... wouldn't want to trade for a set of 15" spoons would you
Good luck on the sale
![](https://honda-tech.com/forums/images/smilies/emsmilep.gif)
![](https://honda-tech.com/forums/images/smilies/emthup.gif)
#6
Honda-Tech Member
iTrader: (1)
Join Date: Aug 2005
Location: JDM Speedworx, CA, USA
Posts: 5,170
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
ummm....did u buy these from inlinefour???
can you post picks of the inside of the rims including the stickers?
those rims aren't supposed to have a logo on the spoke. inlinefour made fake ones and put the logos on them to make people think it was the new generation SW388's.
can you post picks of the inside of the rims including the stickers?
those rims aren't supposed to have a logo on the spoke. inlinefour made fake ones and put the logos on them to make people think it was the new generation SW388's.
#7
Honda-Tech Member
Join Date: Sep 2003
Location: CA, Canada
Posts: 1,506
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 209SpoonEK9 »</TD></TR><TR><TD CLASS="quote">ummm....did u buy these from inlinefour???
can you post picks of the inside of the rims including the stickers?
those rims aren't supposed to have a logo on the spoke. inlinefour made fake ones and put the logos on them to make people think it was the new generation SW388's.</TD></TR></TABLE>
You can see the desmond sticker from the pic actually.
can you post picks of the inside of the rims including the stickers?
those rims aren't supposed to have a logo on the spoke. inlinefour made fake ones and put the logos on them to make people think it was the new generation SW388's.</TD></TR></TABLE>
You can see the desmond sticker from the pic actually.
Trending Topics
#9
Honda-Tech Member
iTrader: (1)
Join Date: Aug 2005
Location: JDM Speedworx, CA, USA
Posts: 5,170
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EM2Civic »</TD></TR><TR><TD CLASS="quote">
You can see the desmond sticker from the pic actually.</TD></TR></TABLE>
I can barely see anything. It's easy to make a fake Desmond sticker, I'm sure. Spoon never put logos on their SW388's.
Inline Four was the only shop that sold these rims with the logos on the spoke as far as I'm aware. I heard they were in some sort of trouble for doing that.
You can see the desmond sticker from the pic actually.</TD></TR></TABLE>
I can barely see anything. It's easy to make a fake Desmond sticker, I'm sure. Spoon never put logos on their SW388's.
Inline Four was the only shop that sold these rims with the logos on the spoke as far as I'm aware. I heard they were in some sort of trouble for doing that.
#10
Honda-Tech Member
Thread Starter
Join Date: Oct 2002
Location: Mississauga, Ontario, Canada
Posts: 1,923
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 209SpoonEK9 »</TD></TR><TR><TD CLASS="quote">
I can barely see anything. It's easy to make a fake Desmond sticker, I'm sure. Spoon never put logos on their SW388's.
Inline Four was the only shop that sold these rims with the logos on the spoke as far as I'm aware. I heard they were in some sort of trouble for doing that. </TD></TR></TABLE>
![](https://img.photobucket.com/albums/v209/BigHairyGino/IMG_0415.jpg)
Thats a bad picture, it was blurry since I took it out in the cold. And how positive are you that inline four was the only one to put those stickers on the spokes? Pick up a Hyper Rev Integra Vol.1, go to the wheels section in the back of the book and look at the SW388 pictured there. Tell me what you see on the spoke.
What do you think these are Rotas?
I can barely see anything. It's easy to make a fake Desmond sticker, I'm sure. Spoon never put logos on their SW388's.
Inline Four was the only shop that sold these rims with the logos on the spoke as far as I'm aware. I heard they were in some sort of trouble for doing that. </TD></TR></TABLE>
![](https://img.photobucket.com/albums/v209/BigHairyGino/IMG_0415.jpg)
Thats a bad picture, it was blurry since I took it out in the cold. And how positive are you that inline four was the only one to put those stickers on the spokes? Pick up a Hyper Rev Integra Vol.1, go to the wheels section in the back of the book and look at the SW388 pictured there. Tell me what you see on the spoke.
What do you think these are Rotas?
![](http://images.honda-tech.com/set1/smile/emcrook.gif)
#11
Honda-Tech Member
iTrader: (1)
Join Date: Aug 2005
Location: JDM Speedworx, CA, USA
Posts: 5,170
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
Not saying they're Rotas by any means. I just heard that Inline Four was doing this.
I never saw Opak ever selling SW388's with the stickers. I'll go take a look at the Hyper Rev, though.![](https://honda-tech.com/forums/images/smilies/emwink.gif)
:EDIT: I just noticed you are in Canada. Could it be that these rims were produced only for certain markets? Hmmm...BTW, I'm in no way calling you a liar. It just reminded me about IL4 as soon as I saw the pics.
I never saw Opak ever selling SW388's with the stickers. I'll go take a look at the Hyper Rev, though.
![](https://honda-tech.com/forums/images/smilies/emwink.gif)
:EDIT: I just noticed you are in Canada. Could it be that these rims were produced only for certain markets? Hmmm...BTW, I'm in no way calling you a liar. It just reminded me about IL4 as soon as I saw the pics.
![](https://honda-tech.com/forums/images/smilies/emthup.gif)
#12
Honda-Tech Member
Thread Starter
Join Date: Oct 2002
Location: Mississauga, Ontario, Canada
Posts: 1,923
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 209SpoonEK9 »</TD></TR><TR><TD CLASS="quote">Not saying they're Rotas by any means. I just heard that Inline Four was doing this.
I never saw Opak ever selling SW388's with the stickers. I'll go take a look at the Hyper Rev, though.![](https://honda-tech.com/forums/images/smilies/emwink.gif)
:EDIT: I just noticed you are in Canada. Could it be that these rims were produced only for certain markets? Hmmm...BTW, I'm in no way calling you a liar. It just reminded me about IL4 as soon as I saw the pics.
</TD></TR></TABLE>
Its all good, sorry for coming on like such an ***. 99% of people that I get asking me about the wheels think theyre fake, unless you know what youre looking at. Im the 3rd owner of these wheels, Im not sure where the original owner bought them from.
I never saw Opak ever selling SW388's with the stickers. I'll go take a look at the Hyper Rev, though.
![](https://honda-tech.com/forums/images/smilies/emwink.gif)
:EDIT: I just noticed you are in Canada. Could it be that these rims were produced only for certain markets? Hmmm...BTW, I'm in no way calling you a liar. It just reminded me about IL4 as soon as I saw the pics.
![](https://honda-tech.com/forums/images/smilies/emthup.gif)
Its all good, sorry for coming on like such an ***. 99% of people that I get asking me about the wheels think theyre fake, unless you know what youre looking at. Im the 3rd owner of these wheels, Im not sure where the original owner bought them from.
![](https://honda-tech.com/forums/images/smilies/emsmile.gif)
#15
Honda-Tech Member
Join Date: Jun 2002
Location: Toronto, On, Canada
Posts: 1,149
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Fabfive »</TD></TR><TR><TD CLASS="quote">
Its all good, sorry for coming on like such an ***. 99% of people that I get asking me about the wheels think theyre fake, unless you know what youre looking at. Im the 3rd owner of these wheels, Im not sure where the original owner bought them from.
</TD></TR></TABLE>
you should have just asked me :D
They came from BC Auto, and i think if i remember correctly they are pretty old, i think they are stamped 98
free bump for you too.
oh also ther eis nto way those stickers where put on by hand, they are all in the exact same spot. They defintaly came that way from Japan
Its all good, sorry for coming on like such an ***. 99% of people that I get asking me about the wheels think theyre fake, unless you know what youre looking at. Im the 3rd owner of these wheels, Im not sure where the original owner bought them from.
![](https://honda-tech.com/forums/images/smilies/emsmile.gif)
you should have just asked me :D
They came from BC Auto, and i think if i remember correctly they are pretty old, i think they are stamped 98
free bump for you too.
oh also ther eis nto way those stickers where put on by hand, they are all in the exact same spot. They defintaly came that way from Japan
#16
Honda-Tech Member
Thread Starter
Join Date: Oct 2002
Location: Mississauga, Ontario, Canada
Posts: 1,923
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zc911 »</TD></TR><TR><TD CLASS="quote">
you should have just asked me :D
They came from BC Auto, and i think if i remember correctly they are pretty old, i think they are stamped 98
free bump for you too.
oh also ther eis nto way those stickers where put on by hand, they are all in the exact same spot. They defintaly came that way from Japan</TD></TR></TABLE>
Thanks Rob!
you should have just asked me :D
They came from BC Auto, and i think if i remember correctly they are pretty old, i think they are stamped 98
free bump for you too.
oh also ther eis nto way those stickers where put on by hand, they are all in the exact same spot. They defintaly came that way from Japan</TD></TR></TABLE>
Thanks Rob!
![](https://honda-tech.com/forums/images/smilies/emthup.gif)
Thread
Thread Starter
Forum
Replies
Last Post