D-series goodies...
#1
Trial User
Thread Starter
Join Date: Feb 2000
Location: Toronto, ON, Canada
Posts: 1,146
Likes: 0
Received 0 Likes
on
0 Posts
D-series goodies...
Some d-series goodies...
$450 - Block (approx. 5k km) 12:1 cr, ARP rod bolts, professionally assembled
$350 - SOHC Vtec Head, P&P with dimples, ZEX springs
$300 - Crower Stage 3 Cams
$400 - JG Edelbrock Mild Steel / Ceramic coated two piece header including regular and race down pipes
$100 - JG Edelbrock Cam Gear (silver) (new)
$200 - After market intake manifold with TB, both are port matched, and intake is to the head (silver)
$400 - freshly rebuild +30% clamp increase pressure plate, composite disk (new) and lightened flywheel for Euro-Drive still covered in rust proof oil.
SOLD - JDM LSD tranny (grinds 3rd at high rev) and ZC tranny to use 3rd and 4th gear (closer gearing
$150 - P28 ECU w/ chip
I am willing to let go of everything including all the other bits and pieces to put the engine together (alternator, starter, mounts, etc) for $2000.
All prices in CND $$$.
Please e-mail me at eg1800cc@yahoo.com or call and leave a message at 416-953-9638.
Modified by Screamer at 5:47 AM 6/12/2005
$450 - Block (approx. 5k km) 12:1 cr, ARP rod bolts, professionally assembled
$350 - SOHC Vtec Head, P&P with dimples, ZEX springs
$300 - Crower Stage 3 Cams
$400 - JG Edelbrock Mild Steel / Ceramic coated two piece header including regular and race down pipes
$100 - JG Edelbrock Cam Gear (silver) (new)
$200 - After market intake manifold with TB, both are port matched, and intake is to the head (silver)
$400 - freshly rebuild +30% clamp increase pressure plate, composite disk (new) and lightened flywheel for Euro-Drive still covered in rust proof oil.
SOLD - JDM LSD tranny (grinds 3rd at high rev) and ZC tranny to use 3rd and 4th gear (closer gearing
$150 - P28 ECU w/ chip
I am willing to let go of everything including all the other bits and pieces to put the engine together (alternator, starter, mounts, etc) for $2000.
All prices in CND $$$.
Please e-mail me at eg1800cc@yahoo.com or call and leave a message at 416-953-9638.
Modified by Screamer at 5:47 AM 6/12/2005
#3
Trial User
Thread Starter
Join Date: Feb 2000
Location: Toronto, ON, Canada
Posts: 1,146
Likes: 0
Received 0 Likes
on
0 Posts
Re: D-series goodies... (Screamer)
If anyone is interested in purchasing the engine as a whole I will be more flexible on the price. Please contact me by e-mail at eg1800cc@yahoo.com
Thanks.
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
n*werk
Classifieds: Forced Induction
7
02-07-2009 12:54 PM