Was doing all the wiring of my system after yesterdays mockup and build of an amp rack. I was almost done and went to do the remote wire.

Is it usually the blue solid or the blue/white stripe?

Well coming out of the back of my h/u is a harness with the RCA's and it has a free blue/white wire that is very thin.

The other harness coming out of the back is for my speaker wires and power and such and there is a free solid blue that is fairly thick

I just cleaned up and left it until tomorrow so I could ask on here

Thanks

 

By your description, the blue/white thin wire is the amp turn on lead. The other solid blue should be your power antenna. Doesn't say it on the wires?

 

There actually was writing I think but I can see worse than a bat so there was no way of attempting to read it.

Everyone agree blue/white? Nothing can go wrong other than them not turning on if Im wrong right?

 

what kind or radio is it? and yes like he said 99.9 % of teh time its blue/white for amp turn on, but these days u never know with brands like kenFord and alFine running around fleamarkets and such