my eg hatch build. check it out!
03-31-2008, 03:32 PM
#26
Honda-Tech Member
Join Date: Jan 2006
Location: USA
Posts: 1,499
Likes: 0
Received 0 Likes
on
0 Posts
Re: my eg hatch build. check it out! (EFn JP)
nice pics........when you planning on having the motor done?? I'm still debating on what I am going to do with the teg, put my motor in or keep it the way it is...................keep it going 
03-31-2008, 03:32 PM
#27
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: munchinoncactus in phx az
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
Re: my eg hatch build. check it out! (EFn JP)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EFn JP »</TD></TR><TR><TD CLASS="quote">bump!! are you building it for all motor or a boost setup?</TD></TR></TABLE>
well i wanna spray it and i just want it all motor and i kinda wanna boost it now? but if i put boost to it i would only put a few pounds. idk about all the compression and boost stuff? is 10.5:1 ok on like 6 pounds of boost? but i really would like to go all out on the motor and build it with all new internals and run a turbo with quite a bit of psi. but that wont be for a while if i do.
well i wanna spray it and i just want it all motor and i kinda wanna boost it now? but if i put boost to it i would only put a few pounds. idk about all the compression and boost stuff? is 10.5:1 ok on like 6 pounds of boost? but i really would like to go all out on the motor and build it with all new internals and run a turbo with quite a bit of psi. but that wont be for a while if i do.
03-31-2008, 03:37 PM
#28
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: munchinoncactus in phx az
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
Re: my eg hatch build. check it out! (Youlose1305)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Youlose1305 »</TD></TR><TR><TD CLASS="quote">nice pics........when you planning on having the motor done?? I'm still debating on what I am going to do with the teg, put my motor in or keep it the way it is...................keep it going </TD></TR></TABLE>
well my motor shud be done at the machine shop now. so ill probably have it completely assembled by the end of the week. but yea u have a hard desision to make idk what i would do. i think i would put ur motor in the teg and sell the gsr and the crx?
</TD></TR></TABLE>well my motor shud be done at the machine shop now. so ill probably have it completely assembled by the end of the week. but yea u have a hard desision to make idk what i would do. i think i would put ur motor in the teg and sell the gsr and the crx?
03-31-2008, 04:05 PM
#29
Honda-Tech Member
Join Date: Jan 2006
Location: USA
Posts: 1,499
Likes: 0
Received 0 Likes
on
0 Posts
Re: my eg hatch build. check it out! (tealsvteceg)
yeah the guys think i need to keep the crx and stuff but i just don't have the need for both so i am putting my si seats and the shift linkage for sale on here and just gonna slowly sell the extra stuff i don't need............not sure what i am gonna do with the rex cuz everyone already has enough cars and prolly wont want to buy another but we will see...............I am wondering, where did you take all the pics at anyways?
03-31-2008, 04:11 PM
#30
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: munchinoncactus in phx az
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
Re: my eg hatch build. check it out! (Youlose1305)
idk i think that would be sweet to keep the rex and make it a full out drag car. but i took those pics down past yellowstone bridge by my house and u go past the fishing acces and turn left up this big hill its a pretty good place.
03-31-2008, 04:35 PM
#35
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: munchinoncactus in phx az
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
Re: my eg hatch build. check it out! (Jdmsolutions)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jdmsolutions »</TD></TR><TR><TD CLASS="quote">this is montana market place. i want to buy a rex and sell my hatch... drag car time baby </TD></TR></TABLE>
better get that 1974 jeep!!
</TD></TR></TABLE>better get that 1974 jeep!!
03-31-2008, 04:36 PM
#36
Honda-Tech Member
Join Date: Jun 2006
Location: Billings, Montana
Posts: 1,795
Likes: 0
Received 0 Likes
on
0 Posts
Re: my eg hatch build. check it out! (tealsvteceg)
i wana do both. just gota pay for my mip class then im gona get a new loan to pay off the hatch and get that jeeper... and its a 91 
mmmmmmmmmmmmmmm
mmmmmmmmmmmmmmm
03-31-2008, 04:43 PM
#37
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: munchinoncactus in phx az
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
Re: my eg hatch build. check it out! (Jdmsolutions)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jdmsolutions »</TD></TR><TR><TD CLASS="quote">i wana do both. just gota pay for my mip class then im gona get a new loan to pay off the hatch and get that jeeper... and its a 91 mmmmmmmmmmmmmmm</TD></TR></TABLE>
[freak]...... we gonna mob that jeep with the top off all summer. and then have a few beers and off-road that bitch!
mmmmmmmmmmmmmmm</TD></TR></TABLE>[freak]...... we gonna mob that jeep with the top off all summer. and then have a few beers and off-road that bitch!
03-31-2008, 04:44 PM
#38
Honda-Tech Member
Join Date: Jun 2006
Location: Billings, Montana
Posts: 1,795
Likes: 0
Received 0 Likes
on
0 Posts
Re: my eg hatch build. check it out! (tealsvteceg)
**** ill have a few beers and offroad my civic. atleast then we can be boosted when were stuck in the mudn
03-31-2008, 04:51 PM
#39
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: munchinoncactus in phx az
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
Re: my eg hatch build. check it out! (Jdmsolutions)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jdmsolutions »</TD></TR><TR><TD CLASS="quote">**** ill have a few beers and offroad my civic. atleast then we can be boosted when were stuck in the mudn </TD></TR></TABLE>
hahaha thats not a bad idea i got some 90 teg springs lets lift her sky high!!
</TD></TR></TABLE>hahaha thats not a bad idea
i got some 90 teg springs lets lift her sky high!!
04-01-2008, 07:16 PM
#41
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: munchinoncactus in phx az
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
Re: my eg hatch build. check it out! (tealsvteceg)
im starting to put my stereo in. so far i have a speaker tweater and crossover in my drivers door and crossover and speaker in my passenger im finishing that tomorrow. then i just need to find a deck and hook it all up. also im picking up my acl bearings and my finished block, rods, and pistons! i cant wait to put it all together! ill post picks soon
04-02-2008, 08:09 AM
#44
04-02-2008, 07:18 PM
#45
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: munchinoncactus in phx az
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
Re: (palmbayeg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by palmbayeg »</TD></TR><TR><TD CLASS="quote">nice updates. btw does that header wrap stuff help with sound?</TD></TR></TABLE>
no. its made to cool the header faster and keep it from getting as hot as it normally would. it keeps the exaust flowing through the header cooler for better flow and more horsepower. lots of drag cars use a ceramic coating on there headers to keep em cool. my dad used jet hot coating on his and u could touch the headers after a pass and they would already be cool.
no. its made to cool the header faster and keep it from getting as hot as it normally would. it keeps the exaust flowing through the header cooler for better flow and more horsepower. lots of drag cars use a ceramic coating on there headers to keep em cool. my dad used jet hot coating on his and u could touch the headers after a pass and they would already be cool.
04-02-2008, 07:22 PM
#47
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: munchinoncactus in phx az
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
Re: (teal_dx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by teal_dx »</TD></TR><TR><TD CLASS="quote">http://i273.photobucket.com/al...0.jpg
that's just a bad *** picture right there. clean hatch too!</TD></TR></TABLE>
thanks its one of my favorites. im getting my hood painted soon and my corner lights are coming in so i cant wait to see the car finished, exterior wise.
that's just a bad *** picture right there. clean hatch too!</TD></TR></TABLE>
thanks its one of my favorites. im getting my hood painted soon and my corner lights are coming in so i cant wait to see the car finished, exterior wise.
04-02-2008, 07:30 PM
#48
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: munchinoncactus in phx az
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
Re: my eg hatch build. check it out! (tealsvteceg)
i got up at 6 this morning and drove for almost an hour to get my block and i got to the machine shop and no one was there, and the only time i can go is before work so i was pretty pissed off. later that day i got the news that the guy who opens shop was sick so hopfully i can get it tomorrow. but i finished putting the crossovers, tweaters, and speakers in tonight! sounds clear as hell,even on max! the speakers put out quite a bit of bass. u can hear them bump outside the car. but still needs the amp and a new deck
04-02-2008, 07:55 PM
#50
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: munchinoncactus in phx az
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
Re: (JDM Like Whoa)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM Like Whoa »</TD></TR><TR><TD CLASS="quote">Bump cause that kid in the black hatch looks like he is having a freakin blast doing that burnout. 
</TD></TR></TABLE>
yea hes on his 4th z6 in that car too hahaha
</TD></TR></TABLE>yea hes on his 4th z6 in that car too hahaha