<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 91ed9 &raquo;</TD></TR><TR><TD CLASS="quote">awsome for another CRx haha</TD></TR></TABLE>
Its sad. I want everyone I hear about. I mean I gotta quit, 4 is to many. 3 is ok though.haha

 

any news on the new crx did you go threw with it?

 

Well the guy had another offer for the car and some extra stuff he had. I dont need anything but the car so I couldnt beat the deal. He said that if that guy didnt fall through then he would let me know. Ahh I dont really need another one anyways.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by harmonator84 &raquo;</TD></TR><TR><TD CLASS="quote">The only problem is that will be 4 crx's I have. I am going to have to get rid of 1 or 2 of these. </TD></TR></TABLE>

don't do it man, CRX's ARE THE ****!! I'm lookin for a daily driver crx myself... ever since I bought the turbo kit, hehehe it'll be on my thread when it's installed (shhh dont tell anyone)

ps the more the marrier

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jschnatter &raquo;</TD></TR><TR><TD CLASS="quote">don't do it man, CRX's ARE THE ****!! I'm lookin for a daily driver crx myself... ever since I bought the turbo kit, hehehe it'll be on my thread when it's installed (shhh dont tell anyone)

ps the more the marrier</TD></TR></TABLE>
Yea tell that to my old lady..haha

 

I started working on the car today. Finishing hooking everything up. I pretty much have the complete harness together other than the headlights. I have ran into alittle problem with a missing wire but I think I am about to sniff it down...

My day has started out pretty crapy though because I have drill into the side of the frame rails but all my drills are dead, and I cannot find 1 charger. I am going to have to go buy a charger just to finish the job. I am thinking about going ahead and trying to start the car even though the headlights, corners, and marker lights are not hooked up. I dont see what it could hurt and I just cannot wait to see if it starts back....

 

Usually I’ll start an engine that has already been broken-in without hooking up radiator, axles, and stuff like that just to make sure it fires up ok and I don’t have to pull everything back out if there is a problem. On a new build I don’t do this because I like to fire it up once after priming the oil pump and let it go through a heat cycle, drain the oil and change filter. Head light should not make a difference just make sure on hot wires are touching anything.

post some pics!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by abnaasefmb &raquo;</TD></TR><TR><TD CLASS="quote">post some pics!</TD></TR></TABLE>

start the bitch up haha

todya was a good day for me

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 91ed9 &raquo;</TD></TR><TR><TD CLASS="quote">

start the bitch up haha

todya was a good day for me </TD></TR></TABLE>

bitch, i don't see any new pics on your thread either, and you guys call yourselfs post ******!

 

You guys crack me up!

Well I have been actually working on the car lately, dont have much time to update what I have dont though. I am looking into buying this cage though...what do you guys think? It looks kinda tall to me but I cannot tell because I have never seen what they look like outside the car.

 

what is the brand of the cage

i knwo reading some thread it they had somethign like that in there car idont remembre who it was for some reason crx bart came to mind but i doint think it was him

 

Yeah what brand is it? Is it legal for competition if you go that route?

 

The roll bar is a Kirk Racing roll bar it is SCCA legal for club racing and Solo 1

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by harmonator84 &raquo;</TD></TR><TR><TD CLASS="quote">The roll bar is a Kirk Racing roll bar it is SCCA legal for club racing and Solo 1</TD></TR></TABLE>

Sweet how much? If you don't buy it I will.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CRXBart &raquo;</TD></TR><TR><TD CLASS="quote">Sweet how much? If you don't buy it I will. </TD></TR></TABLE>
He said he was wanting 400 for it but that was acouple months back. He might take alittle less for it now.

 

SO or on the cage?

 

i say go for it bc then if you dont crxbart will

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by harmonator84 &raquo;</TD></TR><TR><TD CLASS="quote">SO or on the cage?</TD></TR></TABLE>

I have a tube bender so 400 is steep for me. I would warn you though it can be dangerous to rock a cage in a street car. Make sure you pad it when not wearing a helmet. Otherwise you could knock you head and get a concussion. If you are comfortable with the sacrifice of having a cage I say go for it.

 

Oh ****, Harmonator is going back to his roots, saws-all the roof off insert roll bar and some BIG *** KC flood lights (I live back in the wood you see, my children, my woman, my dog and me) you know how they do it in Kentucky.

I took the liberty of photoshopping a pic for you ala Chip Foose style! (in best Pedro voice) I have no skillz

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 91ed9 &raquo;</TD></TR><TR><TD CLASS="quote">i say go for it bc then if you dont crxbart will </TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CRXBart &raquo;</TD></TR><TR><TD CLASS="quote">I have a tube bender so 400 is steep for me. I would warn you though it can be dangerous to rock a cage in a street car. Make sure you pad it when not wearing a helmet. Otherwise you could knock you head and get a concussion. If you are comfortable with the sacrifice of having a cage I say go for it. </TD></TR></TABLE>
Well how much would you charge me bart to weld me up a cage. I dont want one welded into the car though. Just pm me when you get the time.

abnaasefmb that is some funny ****. You would be surprised at some of the stuff around here. That photoshop you done is nothing...
haha I almost pissed my pants..haha

 

It looks pretty good from the front...

 

I was wanting somethign like this one really.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by harmonator84 &raquo;</TD></TR><TR><TD CLASS="quote">


Well how much would you charge me bart to weld me up a cage. I dont want one welded into the car though. Just pm me when you get the time.

</TD></TR></TABLE>

I dunno I have yet ti build one. I want to tube my Samurai up before I start doing them for people. It is gonna be my practice. I bought a $900 bender and have not yet used it. I soon will be building one for my CRX though, probably a 10pt. That would be nice to tide me over until I get time though.

 

iv never seen your ride B4... looks like a good project

 

i was born in Lexington