Brayzie's EF9 Build
02-23-2010, 04:08 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2009
Location: The Northwest/City of Rose's,OR
Posts: 1,700
Likes: 0
Received 0 Likes
on
0 Posts
Brayzie's EF9 Build
If you visit this thread,Please leave feedback.
Well since everybody else has a build thread.I might as well have a build thread too.So the project is a 1991 Honda Civic Si ED7, which I got for $450 bucks With 90k on motor and 40k on tranny and a smashed front end.so when i bought it the clutch was sticking.so i towed it home for 70 bucks.As soon as I got it home I teared apart the front end to see how much frame damage there was and yeah just needs a couple frame pulls and its good.So as I'm cleaning the interior there's something in the back of the driver's seat its $500 bucks, so I basically got the car for free.yay more money towards my build so here's a list of what I replaced and what my plans are.
Things replaced and modded/Added
Exterior
front bumper
front filler piece
junkyard hood
passenger fender
corner lamps
bumper lights
windsheild wiper blades
JDM OEM Stanley sidemarkers
OEM Honda Access sunroof visor
Interior
Leather Crx Seats
GSR center Console
Egay Steering Wheel
a damn cd player pioneer deck lol
new kenwood 240 watt door speakers
Suspension and brakes
Skunk2 gas shocks
Skunk2 racing springs coilovers
front and rear strut bars
lower tie bar
c pillar bars
inner and outer tie rods
rack end bushing
brand new brake calipers
brake pads
brand new axles
brand new rotors
front swaybar endlinks
HX wheels
Engine and Drivetrain
SOHC ZC
OEM replacement Clutch kit
Egay Headers
no name cai
new oem oil pan gasket
My Plans
Fully Built All Motor ITR or GSR motor
EF9 front end
Flameco Black Pearl paint job
New Hatch 1990 Civic Si as it sits now
Before
After
Here's Some Pics of my first hatch(don't have any pics of when I first got it,but it was a POS)
1 month into the build
5 months later
Well since everybody else has a build thread.I might as well have a build thread too.So the project is a 1991 Honda Civic Si ED7, which I got for $450 bucks With 90k on motor and 40k on tranny and a smashed front end.so when i bought it the clutch was sticking.so i towed it home for 70 bucks.As soon as I got it home I teared apart the front end to see how much frame damage there was and yeah just needs a couple frame pulls and its good.So as I'm cleaning the interior there's something in the back of the driver's seat its $500 bucks, so I basically got the car for free.yay more money towards my build so here's a list of what I replaced and what my plans are.
Things replaced and modded/Added
Exterior
front bumper
front filler piece
junkyard hood
passenger fender
corner lamps
bumper lights
windsheild wiper blades
JDM OEM Stanley sidemarkers
OEM Honda Access sunroof visor
Interior
Leather Crx Seats
GSR center Console
Egay Steering Wheel
a damn cd player pioneer deck lol
new kenwood 240 watt door speakers
Suspension and brakes
Skunk2 gas shocks
Skunk2 racing springs coilovers
front and rear strut bars
lower tie bar
c pillar bars
inner and outer tie rods
rack end bushing
brand new brake calipers
brake pads
brand new axles
brand new rotors
front swaybar endlinks
HX wheels
Engine and Drivetrain
SOHC ZC
OEM replacement Clutch kit
Egay Headers
no name cai
new oem oil pan gasket
My Plans
Fully Built All Motor ITR or GSR motor
EF9 front end
Flameco Black Pearl paint job
New Hatch 1990 Civic Si as it sits now
Before
After
Here's Some Pics of my first hatch(don't have any pics of when I first got it,but it was a POS)
1 month into the build
5 months later
Last edited by BrayzieEF9; 08-20-2010 at 01:37 PM.
03-09-2010, 11:48 AM
#4
Honda-Tech Member
Thread Starter
Join Date: Dec 2009
Location: The Northwest/City of Rose's,OR
Posts: 1,700
Likes: 0
Received 0 Likes
on
0 Posts
Re: Brayzie's EF9 Build
Small update
just picked up some parts from honda today when i got off work.graveyard shift(10 hrs ughh)just some front swaybar endlinks,oil pan gasket,and some new brake rotors.
just picked up some parts from honda today when i got off work.graveyard shift(10 hrs ughh)just some front swaybar endlinks,oil pan gasket,and some new brake rotors.
Trending Topics
03-10-2010, 07:05 AM
#8
Honda-Tech Member
Thread Starter
Join Date: Dec 2009
Location: The Northwest/City of Rose's,OR
Posts: 1,700
Likes: 0
Received 0 Likes
on
0 Posts
Re: Brayzie's EF9 Build
Update
So last night when I pulled into work.I pull into a parking spot with a pillar(parking garage), as i'm pulling in, me, tired as **** doesn't pay attention and BAM!! there goes my quarter panel.it ripped off my side molding and dented my quarter panel.any tips and tricks to fix the dent??
So last night when I pulled into work.I pull into a parking spot with a pillar(parking garage), as i'm pulling in, me, tired as **** doesn't pay attention and BAM!! there goes my quarter panel.it ripped off my side molding and dented my quarter panel.any tips and tricks to fix the dent??
03-25-2010, 11:00 AM
#11
Honda-Tech Member
Thread Starter
Join Date: Dec 2009
Location: The Northwest/City of Rose's,OR
Posts: 1,700
Likes: 0
Received 0 Likes
on
0 Posts
Re: Brayzie's EF9 Build
i am droppin it just havent had time to adjust it.i raised it during the winter.i was rolling slammed during the summer
03-25-2010, 11:51 AM
#13
Honda-Tech Member
Join Date: Jun 2009
Location: Ms
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Re: Brayzie's EF9 Build
it cool go on facebook and look at my pic leeakuma@yahoo.com i did the same thing u did but it took more time still not done tho but u r doing good build ur car slow u will pay more attention to things better. I have build a eg and i didnt like it but this is my better build. any keep up the good work
03-25-2010, 12:00 PM
#15
Honda-Tech Member
Thread Starter
Join Date: Dec 2009
Location: The Northwest/City of Rose's,OR
Posts: 1,700
Likes: 0
Received 0 Likes
on
0 Posts
Re: Brayzie's EF9 Build
it cool go on facebook and look at my pic leeakuma@yahoo.com i did the same thing u did but it took more time still not done tho but u r doing good build ur car slow u will pay more attention to things better. I have build a eg and i didnt like it but this is my better build. any keep up the good work
03-25-2010, 12:47 PM
#17
Honda-Tech Member
Thread Starter
Join Date: Dec 2009
Location: The Northwest/City of Rose's,OR
Posts: 1,700
Likes: 0
Received 0 Likes
on
0 Posts
Re: Brayzie's EF9 Build
because my username is BrayzieEF9.I already went ahead and corrected the title so you guys don't get confused, and don't let me get started on ppl's usernames the majority of users in the ef section have ef in there username.do they have a ef, no they have a ed.and ppl post ef build threads.they don't have ef's, they have ed's.so don't be a smartass or GTFO!!!!
03-25-2010, 01:15 PM
#18
Honda-Tech Member
Join Date: Jan 2009
Location: LOL Canada
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
Re: Brayzie's EF9 Build
because my username is BrayzieEF9.I already went ahead and corrected the title so you guys don't get confused, and don't let me get started on ppl's usernames the majority of users in the ef section have ef in there username.do they have a ef, no they have a ed.and ppl post ef build threads.they don't have ef's, they have ed's.so don't be a smartass or GTFO!!!!
just sayin.
03-30-2010, 02:27 PM
#23
Honda-Tech Member
Thread Starter
Join Date: Dec 2009
Location: The Northwest/City of Rose's,OR
Posts: 1,700
Likes: 0
Received 0 Likes
on
0 Posts
Re: Brayzie's EF9 Build
update
so last night got into a accident,hit and run.car got totaled.no insurance.blah don't wanna hear you shoud've had insurance
well here's somes pix
so last night got into a accident,hit and run.car got totaled.no insurance.blah don't wanna hear you shoud've had insurance
well here's somes pix
