Heres my current DD and also trying to sell 91 DA B16A/YS1 swapped....


But back to my project log

I bought this car off a friend. It was stolen and stripped of the JDM front bumper, hood, headlights, rims, and recaros.

Well here is the mods i know of so far to the car.

B18B1 motor [possibly have b16 pistson?]
Exedy Stage 1
98 spec ITR tranny
AEM Polished intake
Greddy Evo2 catback
NRG Wheel combo
Personal 350mm steering wheel
Koni Yellow
Ground control - Koni specific
Ground control extended tophats
Purple Blox LCA
Purple Bene Towhook
Champ White JDM trunk
15x6.5 Semi-polished slips
98-01 Rear bumper
Shaved side molding



Here is the pic of when we got it towed to my house after we got it out of the impound.




We jacked up the back with my jack & used an engine hoist to raise the front.



Me & my friend moved it with only 2 rims and a jack holding up the front...LOL & this is how it now sits.




Before i put the bumper one, had to bend the bumper supper, and had to slot the holes in the bumper reinforcement bar. Got the hood on and put the front bumper on.



Did some pulling and bending to make the headlights fit better. Also put in a new ignition switch and fixed the remote start wiring.


Then i wired up the headlights, sidemarkers and corner lights, put the dash back together, also lowered the hood hinge. and reinstalled front end to make sure it fit.


and thats it for now.

 

Looks good! now for some wheels and some new recaros

 

nice save.
now install an alarm so it wont get stolen again.

 

Yeah im going to save up for some 16" SSK 031, and I plan to get black recaros and get ITR rear seats

thanks...it already has an alarm. but im going to do a clean up on the shitty wiring the place did.

 

Well didnt get to update this since i havent had internet for a while.

Finally got it in a driveable state..Heres a pit i took afterwards.

Primered fiberglass bumper with slips.


The only pic of the DA and the DC I ave. Already sold the DA.


Here it is after i painted the bumper white..


And whats waiting to be installed, ASR Kit, Benen Black Chrome 3PT bar, Blox LCA, Blox Lugnuts, Benen towhook. [pic was took with camera phone]



Also have a Replica OEM Front lip, waiting to be isntalled. Also hopefully picking up a Ported B18B1 from another H-T member.

 

havent updated it in a while...

but since the last update.

installed ASR swaybar kit, Blox purple LCA, BLox lugnuts, Benen towhook.
installed used Koni yellow, ground control, extended front tophats. 550f 500r springrates.
put on replica front lip & painted it
installed a Wink 5-panel mirror
stripped down the slipstreams


pics are from the oldest to newest.

 

how much did u pick the car up for?

 

lets just say i spent more on the konis, asr sway bar kit, LCA, tripod bar. than i did to buy the car

 

***** looking good.

 

hey man can u put the asr rear sway bar with the lca's?

 

more pics...!

 

thanks..appreciate it

yeah ill try to get more pics in....i only have one control arm in tho, since one of my the rusted onto the metal sleeve in the bushing.

try to get more tomorrow....


also updated the modlist more

 

Look good and very nice warm weather..

 

sexy

 

polished, ftw!

 

i wonder were those polished to begin with or black?

 

i cant keep my stock rear sway bar with blox lower control arms huh?