Team 1320's All Motor ITB K20/K24/k26 Eg Project
06-25-2008, 10:14 PM
#501
Honda-Tech Member
Thread Starter
Join Date: Oct 2006
Location: San Diego, Ca
Posts: 3,597
Likes: 0
Received 0 Likes
on
0 Posts
Re: (regamaster)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by regamaster »</TD></TR><TR><TD CLASS="quote">Son get that **** done !
IF you need some injectors, I might have some 750cc laying around and a brand new throttle cable for you too ! Dont lag on ordering the axles. they take the longest to get if they do not have them stocked. Especially with a major event going on soon... it might be hard.
Let me know
</TD></TR></TABLE>
yeah i just got off the phone with jeff not too long ago, he told me you are upgrading so he was gonna talk to you about it... i gave him an update of what i need... i gotta make a few calls tommorrow for sure... i hope that throttle cable will work. either way i'lll be calling you tomorrow also. you get my aim message from lastnight?
IF you need some injectors, I might have some 750cc laying around and a brand new throttle cable for you too ! Dont lag on ordering the axles. they take the longest to get if they do not have them stocked. Especially with a major event going on soon... it might be hard.
Let me know
</TD></TR></TABLE>
yeah i just got off the phone with jeff not too long ago, he told me you are upgrading so he was gonna talk to you about it... i gave him an update of what i need... i gotta make a few calls tommorrow for sure... i hope that throttle cable will work. either way i'lll be calling you tomorrow also. you get my aim message from lastnight?
06-26-2008, 10:00 AM
#504
Honda-Tech Member
Join Date: Aug 2002
Location: NORCAL
Posts: 1,038
Likes: 0
Received 0 Likes
on
0 Posts
Re: (SIXTY)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SIXTY »</TD></TR><TR><TD CLASS="quote">We better see this car in Bakersfield in November 
</TD></TR></TABLE>
</TD></TR></TABLE>
06-26-2008, 10:55 AM
#506
Join Date: Jun 2008
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Re: (team1320_k26eg)
hey team1320_k26eg
One thing i really dont quite get it about your k20ATI crank damper, aint ATI only build the crank damper for the k20 and yours is a brian crower K26 man !!,
Did u get some special order or something like that?..
hmmm
One thing i really dont quite get it about your k20ATI crank damper, aint ATI only build the crank damper for the k20 and yours is a brian crower K26 man !!,
Did u get some special order or something like that?..
hmmm
06-26-2008, 03:18 PM
#508
Honda-Tech Member
Thread Starter
Join Date: Oct 2006
Location: San Diego, Ca
Posts: 3,597
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Recipe-K)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Recipe-K »</TD></TR><TR><TD CLASS="quote">hey team1320_k26eg
One thing i really dont quite get it about your k20ATI crank damper, aint ATI only build the crank damper for the k20 and yours is a brian crower K26 man !!,
Did u get some special order or something like that?..
hmmm</TD></TR></TABLE>
the brian crower crank shaft im using is the almost the same as the k24 crank (expect oem is 99mm and the brian crower is 102mm) you can use your stock crank pulley and 19mm bolt on it. when i ordered the ati i just asked for the k20 version cause the oem k20 pulley worked fine on my last k24 crank, the damper fit great on the brian crower crank.
One thing i really dont quite get it about your k20ATI crank damper, aint ATI only build the crank damper for the k20 and yours is a brian crower K26 man !!,
Did u get some special order or something like that?..
hmmm</TD></TR></TABLE>
the brian crower crank shaft im using is the almost the same as the k24 crank (expect oem is 99mm and the brian crower is 102mm) you can use your stock crank pulley and 19mm bolt on it. when i ordered the ati i just asked for the k20 version cause the oem k20 pulley worked fine on my last k24 crank, the damper fit great on the brian crower crank.
06-26-2008, 03:20 PM
#509
Honda-Tech Member
Thread Starter
Join Date: Oct 2006
Location: San Diego, Ca
Posts: 3,597
Likes: 0
Received 0 Likes
on
0 Posts
Re: (regamaster)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by regamaster »</TD></TR><TR><TD CLASS="quote">Tick Tock
Tick Tock
Time is wasting away !
</TD></TR></TABLE>
more like i need
money money
money money
Tick Tock
Time is wasting away !
</TD></TR></TABLE>more like i need
money money
money money
06-27-2008, 02:05 AM
#511
Join Date: Jun 2008
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Re: (team1320_k26eg)
Oh man I'm sorry I don't really get you as my ''noob'' status ,i'm indeed a noob .But I believe what you are basically saying is that the ATI crank damper is going to be a ''plug and play'' that works even for your 102 crank right!. However many builders suggested to me that the ''stock'' damper is sufficient is this true?
No I'm not planing to get the stock 99mm crank I want to do the Brian Crower the 102 x 89 stroker kit.
Hope you can advice me as you have all the information about it.
1)Ain't the BC stroker kit consist of the ARP bolts but are they talking about are the rod bolts or the ARP head stud...little misleading here
2)Crower maxi lite rods -UPDATED 5/24/07: custom maxi lite Brian Crower rods part of stroker kit . Aren't the Maxi light rods lighter than the Brian Crower rods?
3)Why didn't you use the modified S2000 oil pump since it can allow you to rev at a higher limit ,are you limited to around 8000rpm now ??
Thanks for educating me man...you guys are really the K- Gurus..
No I'm not planing to get the stock 99mm crank I want to do the Brian Crower the 102 x 89 stroker kit.
Hope you can advice me as you have all the information about it.
1)Ain't the BC stroker kit consist of the ARP bolts but are they talking about are the rod bolts or the ARP head stud...little misleading here
2)Crower maxi lite rods -UPDATED 5/24/07: custom maxi lite Brian Crower rods part of stroker kit . Aren't the Maxi light rods lighter than the Brian Crower rods?
3)Why didn't you use the modified S2000 oil pump since it can allow you to rev at a higher limit ,are you limited to around 8000rpm now ??
Thanks for educating me man...you guys are really the K- Gurus..
07-12-2008, 04:51 AM
#515
Join Date: Jun 2008
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Re: (team1320_k26eg)
Hey just wanted to know does your BC kit cause any problem so far? , or should we say does it make more power and torque throughout the rpm band...as far as theory is concern,
When the rod ratio gets shorter the loading in the cylinder walls gets way to high and causes more friction than the added size helps.
Does this so called ''theory'' really shorten engine life and fail to provide the optimize power over the 2.4L counterparts? .... just wondering..hmmm
When the rod ratio gets shorter the loading in the cylinder walls gets way to high and causes more friction than the added size helps.
Does this so called ''theory'' really shorten engine life and fail to provide the optimize power over the 2.4L counterparts? .... just wondering..hmmm
08-04-2008, 02:50 AM
#517
Honda-Tech Member
Join Date: Apr 2003
Location: San Diego
Posts: 9,041
Likes: 0
Received 0 Likes
on
0 Posts
Re: (trickyricky)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by trickyricky »</TD></TR><TR><TD CLASS="quote">Armando, I got you another sticker for your car 
</TD></TR></TABLE>
Hey son, its been a while
Check your PM Ricky Ricardo...
You too Armando
</TD></TR></TABLE>Hey son, its been a while
Check your PM Ricky Ricardo...
You too Armando
08-04-2008, 12:46 PM
#520
Honda-Tech Member
Thread Starter
Join Date: Oct 2006
Location: San Diego, Ca
Posts: 3,597
Likes: 0
Received 0 Likes
on
0 Posts
Re: (2fastGSR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2fastGSR »</TD></TR><TR><TD CLASS="quote">Get this beast ready for Fontana. . . The west is going to need all the help they can . . . </TD></TR></TABLE>
haha..
Team 1320's All Motor ITB K26 hit list:
1.AllMoToRB18c
2.2fastGSR
on another note i know there's people watching my thread that do nothing but hate and talk **** like a little girl. so please if this is you, stop visiting this thread and lurking around to see what i do next. you know who you are.
</TD></TR></TABLE>haha..
Team 1320's All Motor ITB K26 hit list:
1.AllMoToRB18c
2.2fastGSR
on another note i know there's people watching my thread that do nothing but hate and talk **** like a little girl. so please if this is you, stop visiting this thread and lurking around to see what i do next. you know who you are.
08-04-2008, 01:13 PM
#522
Honda-Tech Member
Join Date: Jan 2003
Location: SoCAL, CA
Posts: 745
Likes: 0
Received 0 Likes
on
0 Posts
Re: (team1320_k26eg)
Were you guys tuning the car at Church's not too long ago? White hatch with CPR's? If so, very nice build and hope you guys do well at the track
08-04-2008, 01:46 PM
#523
King of the One Liners
Re: (team1320_k26eg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by team1320_k26eg »</TD></TR><TR><TD CLASS="quote">
haha..
Team 1320's All Motor ITB K26 hit list:
1.AllMoToRB18c
2.2fastGSR
on another note i know there's people watching my thread that do nothing but hate and talk **** like a little girl. so please if this is you, stop visiting this thread and lurking around to see what i do next. you know who you are.
</TD></TR></TABLE>
Who would talk **** on your build? Its going to be a freaking beast once its dialed in . .
See you out there sir . .
haha..
Team 1320's All Motor ITB K26 hit list:
1.AllMoToRB18c
2.2fastGSR
on another note i know there's people watching my thread that do nothing but hate and talk **** like a little girl. so please if this is you, stop visiting this thread and lurking around to see what i do next. you know who you are.
</TD></TR></TABLE>
Who would talk **** on your build? Its going to be a freaking beast once its dialed in . .
See you out there sir . .
