snaileg

I have a brand new in the box custom underhood race intake manifold made by nah2b (honda-tech). He is the current record holder for an all motor h series car (10.43 @ 131mph). It's good for both n/a and forced induction cars.

- Brand new core was purchased for this.
- 90mm tb opening
- Never been used ever just unwrapped to look at it
- It's ported inside also ported in the runners.
- Also included a custom made adapter plate to run a smaller tb.

$650 shipped + paypal can call/text me at 913-742-3382

Personal pictures:




I have a custom Parris Engine Dynamics h2b side exit race header

- I haven't installed this header yet
- Bought from jdm_jeffrey off honda-tech
- His best time was 10.68 making over 330+ whp
- Burns stainless collector and megaphone
- Also including one brand new single cam alternator, alternator relocator bracket specced to this header only, and brand new alternator belt

Video shows him using the same exact header that I bought off him it's the "only one" ever made.

http://www.youtube.com/watch?v=bJksnrTAdzo

$950 shipped + paypal with everything included.

BMo Tuning

Selling my barely used Carillo Pro A connecting rods for h22, looking for $400obo. Contact me at 3017301003

civic00sir.

iTrader: (7)

Pmed!

civic00sir.

iTrader: (7)

U got PM...

civic00sir.

iTrader: (7)

FS: Skunk2 Pro 2 Cams, bought brand new, used for low miles, $450 (pictures upon request)

4thgenphil

WTB

H22 mahle golds, 11.5-1
H22 ITB's (obx are fine by me!)
F22/H23 after market RODs
cometic head gasket
ARP head and main bolts

cheaper the better TBH

cheers guys

phil

zuptidi

SOLD

0Innes

iTrader: (3)

Custom 95mm x 86.5mm B Series Rotating Assembly

Email -- James@IPGParts.com
Phone -- 407-324-4684

Price -- $1695

Ready to go play with the big boys ?

This is a brand new B Series Rotating Assembly. Designed to maximize Naturally Aspirated horsepower the parts used here are some of the best on the market. You want to make 300+ Wheel Horsepower with an All Motor B Series Engine ? You Need These Parts !!!!

Includes:
- Custom 95mm Crankshaft (Unknown Manufacturer, isn't marked anywhere)
- Custom GRP Aluminum Rods for 95mm Crankshaft
- Custom Wiseco 86.5mm Bore High Compression Pistons -- Skirts and Domes are coated.
- ACL Race Bearings, DFL Coated.

These are about some of the coolest parts you can get for a serious B Series All Motor Engine Build.

We do have a Bare B18c1 Darton Sleeved Engine Block as well that we can offer for sale with these components so that you can have a block to install these parts into (block will need cylinder bore / hone to match these pistons)

mec. pedri

iTrader: (1)

Pro Topline (rhs) Gsr cylinder head in out the box condition


--------------------------------------------------------------------------------

i have a brand new "pro topline" cylinder
it is a brand new casting, never ever been bolted on to a cylinder block
these heads in their original form come bare from the manufacturer
i am selling it with a fresh valve job utilizing all stock components and fresh oem honda valve seals

you will need to supply an intake manifold and dizzy and valve cover and i will supply the rest

head will include a set of b16a camshafts

this a great deal for essentially a brand new item
few pics before valve job and assembly


















below is a thread on one of these heads




https://honda-tech.com/forums/showth...2395920&page=2



$550 shipped to your door via usps priority with delivery confimation any where in the usa

100% paypal verified

koczeka

WTB 84 or 84.5mm mid dome forged pistons with a 1.044" compression height (89mm crank and 5.531 .137 long rods).

SL0WEGG

FS: H22 pro 2 cams, maybe 300 miles on them. $500 shipped

kyosoeg6

iTrader: (7)

all parts must go asap. will be up on ebay by the end of the month. most parts have less than 4k miles on them. i will not refuse any good offer. buyers pay paypal fees and actual shipping cost . please check link for exact detailed parts

Benson sleeved 85mm gsr block, fully built w/skunk2 and ported gsr head, lots o skunk 2 parts

hondata s300 p28 boost 500

(6) lenso VPD's , (4)15x6 205/50 tires (2) 13x7 w/ 22x8 mt slicks 75% life left $999
will not seperate!!!

for a complete list of everything for sale please follow link:https://honda-tech.com/forums/all-motor-naturally-aspirated-44/so-i-spun-bearing-friday-2947190/

Rosko

iTrader: (1)

H22 Competition Clutch twin disk setup, used very little $850 shipped

daigo

WTB:
ATI Race Dampner for B Series

wreckeddc4

WTB: b series header something decent for around 220hp ls/vtec.

kyosoeg6

iTrader: (7)

100% working order distributors. tested before pulled and will test before ship. i will replace the item if u find it defective. need these gone asap ! paypal only

90 obd1 gsr/b16 missing cap

80 obd2 gsr/b16 missing cap

70 obd0 ls complete

text or email for faster response 915-920-1684 or kyosoeg6@gmail.com

SQ is the SQUAD

"custom" bisimoto b series header. paid $1200 for this a few years back. has about 3 hours sunning time/idle plus 200 driven miles on it. sanded down surface rust and repainted hitemp silver. it was cremic coated

$800 shipped.

will consider trades for AMR suspension or SMSP headers/cat.

97mm_EH3

WTB:

(4) Air horns for 50mm twm itbs. I need the 35mm length ones. carbon fiber or aluminum dosent matter. P/n`s 2900-5035 or 4000-5035. Need asap cash ready. Paypal only

01DC4

iTrader: (3)

Darton Sleeved GSR Block, 85mm Needs bored to 85.5 otherwise great condition, Bare block comes with matching mains, $750.00

venomfrmdc

is the hydro gsr tranny still available? pm please

RACEPAK

hi guys

i have a new polished VENOM LS intake manifold for sale,
i'm asking 450+ shipping

or trades for:

HONDATA S300

NEW garrett t3 turbo

USED tial bov and wastegate

venomfrmdc

WTB: in obd1 ecu hondata s300

also luking for a gsr power steering bracket

dguzman

WTB: Skunk2 PRO 2 (B18C) PM For Offers

kyosoeg6

iTrader: (7)

YCP 85mm pistons. very very similar to Rs machine

used less than 4k miles . includes rings wrist pins and locks 175 shipped and paypal

new in box YCP 85mm pistons. same as above just nib. 225 shipped and paypal


email or text for faster response. kyosoeg6@gmail.com or 915-920-1684

justnprsh07

For sale!!! Everything is OBO!!!

Text for a faster response 7065877278

2 H22 crower pro rods $50 each

H22a darton sleeved block. Needs line honed or line bored due to spun bearing $550
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

H22 50mm crank stock, never been turned, in near perfect shape $200 or trade straight up for a 55mm crank in same condition "this crank is not the crank from the above block" text for more pics
[IMG][/IMG]

MSD SCI ignition box works like new just no need for three so im selling one $100
[IMG][/IMG]