BigDare23

Name: Darryl
Location: Raleigh-Durham NC
Contact: Email for quicker response d_baker3@hotmail.com
Item: Replica Hytech Big Tube header with a PCI Skid Plate.
Price:SOLD

Up for sale is my replica Hytech Big Tube header (not a normal Hytech replica). This header is made for 2.0L and high output 1.8L B-series motors. It comes with a PCI header skid plate.

Now for pics of my header




You can tell it's a big tube header because of the collector (besides looking at the tubes)




Skid Plate




If you're interested, email me at d_baker3@hotmail.com

blacK_Dc4

for sale is a fluidampr crank pulley / harmonic balancer race series part # 620601 for any bseries ( gsr/itr/b16 ) ... its used , a little dirty, but in excellent condition. It will come with a custom length alternator belt. brand new is $380 + ... my price is $280 obo . PM me or email me at black_dc4@yahoo.com for further price negotiations or questions

revn9k

Name: Adam
Contact: (706) 761-2854, pm, or revn9k@hotmail.com
Price: $1100 for package or $1000 without extra discs. FREE FAST INSURED SHIPPING!

H22 Tilton Twin Disc Clutch Kit - Honda Prelude.




Tilton's top-of-the-line Cerametallic twin disc kit.

5.5" discs - set of 5 = 2 brand new to run and 3 spares(1 new, 2 used).
7.25lb lightweight flywheel - 12" in diameter for h22; brand new.
3 floater plates; used; great condition.
8 p-plate to flywheel bolts; brand new.
pressure plate; used; great condition.



Below are pics of extra discs, tilton packaging box it's in, and better close-ups of each component. It's all legit and has not touched a car since I took it out of the box I got it in.







Kit includes flywheel, pressure plate/cover, 5 discs, all 3 floater plates, and 8 pressure plate to flywheel bolts. This setup can NOT be found anywhere new for less than $1500 shipped. From a good distributor they run $1500 to $1900. You are saving $500 to $1000 by getting it from me - perfect seller reputation; actually, add an extra $200 you're saving for the extra 5 1/2" disc pack added in. Basically 50% off!!

Amazon.com: Tilton 56-314 Cerametallic Clutch Kits: Automotive



Twin Disk Clutch-- TILTON Vs. SPEC - Honda-Tech
^^ Honda-Tech review of Tilton twin disc vs. Spec.
Basic summary - anybody who's going fast HAS a Tilton twin disc. It is the most reputable brand, highest quality, and highest priced since there are decades of proven track quality driveline components from Tilton. You won't find better customer service. Their clutch kit is completely rebuildable/serviceable = you'll never have to replace the clutch; buy this clutch kit for racing application, and it will last forever - simply replace parts on it rather than replacing the clutch. You keep the original pressure place, flywheel forever, and only replace discs, bearings, and wearpad. No single-disc clutch setup is made to be servicable - they last a year or two, then you fork out another $400-$500 to replace the whole thing. Buy this once and NEVER have to buy another clutch; this one lasts forever.

I believe this clutch kit is rated at 740 LB-FT CAPACITY according to TiltonEngineering.com

99hondaboy

hello honda-tech, i have up for sale is a set of b-series Toda Racing headers (the real deal no knockoff) headers are in great/new shape,no scratches no dents. used for only 2months paid 1200$,reason for sale not all motor any more lookin for 800 firm thanks
813-300-6372 cory
located lutz,fl

boo5tedteg94

Wtb: Stroker crank for a b series. 92 or 95mm. Pm me with price and pics.

johnson_racing

FS: Skunk2 Pro3+ Camshafts

There is one dyno session and 3 quarter mile passes on these cams. I found an incredible deal on a K series so I pulled the motor out and decided to part it out. Please feel free to PM me for any further questions.

Price: $500 OBO + Shipping

Feel free to make offers, the worst I could say is no.

skunk2allmotor

HP RACING manifold for gsr head full ported out. made 250+ N/A on dyno, manifold can be used for turbo also. 400



Rc 550 sl-9 injectors 200 perfect working order


Benen Fuel Rail does NOT include fittings for the ends. you will have to get youyr own fittings for fuel lines or u can buy the braided kit which comes wit everything. 100 bux

Skunk2 Throttle Body 70mm no tps sensor included 150

jmart41791

for sale:
b20 84.5 RS Machine Pistons brand new with rings
b20 Eagle H-Beams brand new
looking to get 250 for both
also have a red type R valve cover

Aesthetic Gains

iTrader: (1)

WTB: B Series 13.0:1 to 14.5:1 pistons 84mm to 85mm. Let me know what you have. Must be in good usable condition.
Also, WTB a set of Rocket M24xx, Pro2 or Pro3 cams. Let me know what you have.

90efhatch

I have a LSVTEC conversion kit brand new in the wrapping NO HEADGASKET. $140 shipped. I STILL HAVE THIS

futrhondaownr

PM me on here if interested
Located in Hampton Roads area of VA

Skunk2 Pro 1 cams with Pro series valve springs and retainers used for a few dyno pulls - $575 shipped plus paypal fee's

teefunk01

h22 skunk2 tuner 1 cams
$350 shipped
h22 aem cam gears 5 bolt
$110 shipped
b series aem blue fuel rail $100 shipped
b series aem fpr blue $70 shipped
eg/dc K series swap axles $170 shipped

Twisted Image

Dont want to do it, but it is going to have to go.

Located in Kansas City

816-896-8030
Jeff

B20 Vtec parts list

B20 Block
Arias 12.8:1 pistons 84mm
Eagle H beam rods
ACL Main and rod bearings
Type R Oil pump and pickup
Gsr Water pump
ARP head studs
New timing belt and tensioner
Block and Crank machine work By Vee Village

Gsr Head with New Kid 10K port and polish
All New Valve guides
Manley Keepers
Skunk 2 Cam Gears
Skunk 2 Stage 2 Pro Cams
Ferrea Flat face valves
Victor X manifold
Hondata Intake gasket
Holley 70MM big bore throttle body
D1M fuel rail
RC 660 Injectors
GSR Dizzy


B16 Cable Trans
New 2nd and 3rd gears and synchros from Mfactory
Mfactory LSD
New bearings on main and counter shaft
New bearings on Pressure plate and Throw out
Exedy stage 1 clutch with 8,000 miles
Fresh turned GSR flywheel

I believe all sensors are in place and what isn’t on the motor
I have set aside and will go with it
Harness is from a CRX and is tucked to the motor very tight
Boomslang conversion harness
Chipped P28 but will need more like Demon or S300
Have 1 axle that can go with the setup
Place racing Welded solid motor mounts
GSR Valve cover with 2 bungs that need welded
Baffled Catch Can

Motor will be in the 14.0:1 compression range so
I would highly make sure you look at E85 in your
area or race gas, I would not run this on 91!!

Asking $4500 or best offer. Besides the clutch nothing has a single mile on it!
















Drive train is also availible for sale with the entire car, see this thread for all of it!
http://www.kcsr.org/showthread.php?t=76880

LSR-Abuser

Usdm type r pistons with rings 81mm brand new $90.00

drocto3000

rc 440 injectors 150$...

DDTECH

http://www.hondamarketplace.com/show....php?t=2852481


Shop cleaning AGAIN!

soulpwr

FS: Used Eagle 95 mm stroker kit for sale $700 for an extra $200 i'll throw in the sleeved ls block it came out of.

SoHc94

Rc 550 peak and hold. pl9-550
used but good condition.
160 shipped

DDTECH

I'd like to clear up some misunderstanding from some people , i've gotten a few pms.

I have "2" Fully assembled b16a blocks. Whats this mean? They are fully assembled, they need a tranny and a head. They both come with timing belts, and both have under 44kish miles.. walls and hone marks are still visable.

I have "1" BARE b16a2 head. Whats this mean?? I have a b16 head, with no manifold, vtec noid, or dizzy. It does have a valvecover and does have rocker arms. I do have the stock valvetrain(full) that came with it.

The head i want 300 for, the blocks , apiece i want 300 for.

I Do also have a full b16a2 swap out of a 99si.. Whats this mean?? its a full drop in motor.
Motor, tranny and ecu. it has under 43k miles, which is what the car has on it.
Throw me a offer, no low balling..i can also include axles as well, i obviously want more then 600.00.

92cxturbo

B-series Skunk2 header 450 plus shipping/paypal

JUNHONDAPOWER

FS JUN AUTO 4 beseries VTEC camshafts, brand new in the box. Purchased from upgrade motoring, specs are on there site. 1200$ obo

d00mlol

lol such a reasonable price.

B20vEf9

That's a pretty good deal.

FakeJDMEF8

I have a JG b16a/Type R IM and Omni power 68mm throttle body/gasket for sale $375 shipped in the US...

JDM_JNKY

iTrader: (4)

$250 Shipped firm 81mm +.3 Brand New Arias Pistons #311074 GSR 12:5.1 B16A 10:5.1 B18A 11:5.1 on 100% stock engines PM me for Tech Sheets! Installed NEVER EVER STARTED! Comes w/ rings, pins, & locks